Govind Enterprises Tejgarhi, Meerut, Uttar Pradesh

  • wooden cooling towers

    wooden cooling towers

    Request for Price

    Get Best Price
  • Flow Control Valve

    Flow Control Valve

    Request for Price

    GSCTCL flow control valves are available in 150 mm to 500 mm dianeter range. It has cast iron body, cast iron operating handle, cast iron locking bar, stainless steel spindia and neoprene rubber gaskets.  

    ...more
    Get Best Price
  • SS GRIDS

    SS GRIDS

    Request for Price

    GSCTCL fill suport grids are made in stainless steel wire. It is designed to kep fill splash bars horizontal and also to take load of water as well as fill during operation. It is available for treated timber splash bars or PVC rectangular splash bars, PVC V type splash bars fills.

    ...more
    Get Best Price
  • Sprinkler

    Sprinkler

    Request for Price

    Uniform distribution of water over the honeycomb fill is achived by means of automatic water sprinkler. There is no motor, but with the jet recoil force to rotate and distribution water located centrally, it consists of several PVC pipes, on which a series of apertures are drilled longitudinally, fitted on lighweight, PVC rotary head and mounted on seales ball bearings.

    ...more
    Get Best Price
  • Splash Bar PVC/Wooden

    Splash Bar PVC/Wooden

    Request for Price

    GSCTCL cooling Towers fill is available for cross as well as counter flow cooling Towers . GSCTCL splash fills are available in treated timber and PVC material. These splash bars are specially designed so that they provide required surface area and allow uniform distribution of water over it and ensure smooth flow of air without much pressure drop. Treated timber splash bars are rectangular in cross-section and chemically treated as per IS:401.

    ...more
    Get Best Price
  • rcc industrial counter flow

    rcc industrial counter flow

    Request for Price

      salient features: more efficient and can operate with lower approach. lower pumping head. lower biological attack. lower maintenance. more flexible in view of multiple cell construction. close approaches to wet bulb temperature are achievable. tower can be designed even with higher wet bulb temperature. .

    Capacity : : Upto 3000 CMH / Cell

    Type : : Mechanical Draft Wet Cooling Tower (FRP/Wooden/RCC Counter Flow Mechanical Wet Cooling Tower)

    ...more
    Get Best Price
  • RCC Cross Flow Cooling Towers

    RCC Cross Flow Cooling Towers

    Request for Price

    To provide a longer functional life we engage ourselves in manufacturing specially designed cross flow cooling Towers . These are widely known for its dependability and high performance and readily adaptable for any Natural Flow of water-cooling application. We manufacture these cross flow-cooling Towers with qualitative grades of FRP and aluminum die-casting, which helps in supporting structure that makes them resistant from the chemicals and corrosion. The special design makes it a lesser maintained rotary sprinklers or tiny nozzles. It is easy to clean the distribution basin and nozzles while the Towers is in operation. As the main function is to move the water to the top of the Towers , the power is saved and furthermore gravity does the final thing. The fan, motor and water distribution system are out where you can easily maintain them.  

    ...more
    Get Best Price
  • Pvc Fills

    Pvc Fills

    Request for Price

    We are engaged in offering a wide range of Virgin PVC Fill for Cooling Towers , manufactured using quality material. These Towers are designed to meet the specific cooling requirements of most cooling Towers . In this system, the crossing of air and water stream is in close proximity and thus develops a diffused turbulence, leading to evaporation and efficient heat transfer. Our range of PVC fills is widely appreciated by our clients for longer functionality and is specially treated to cover maximum area for heat exchange. These are extensively used in various applications including air conditioners, electric generators and refrigerators.

    ...more
    Get Best Price
  • Spray Nozzle

    Spray Nozzle

    Request for Price

    Spray Nozzle We supply a wide range of industrial Spray Nozzle that are popular amongst our clients owing to their flow rates, sizes, spray angles and performances. These are procured from reliable vendors across the globe and are quality tested on well-defined parameters before being delivered to our clients.   Flower Nozzle   We offer a range of high performance Flower Nozzle that are reckoned for its robust design and efficiency. The flower nozzler is mounted over the brass collet, which is designed and machined to high accuracy for proper transfer of heat and are covered with a stainless steel clamping band. When the clamping band is tightened, the brass collet firms its grip over the nozzle that results in efficient performance.

    Country of Origin : India

    Type : Spray Nozzles

    Diameter : 0.5-1mm

    Application : Industrial Use

    ...more
    Get Best Price
  • industrial rcc cooling towers

    industrial rcc cooling towers

    Request for Price

    Get Best Price
  • Induced Draft Cross Flow Cooling Towers

    Induced Draft Cross Flow Cooling Towers

    Request for Price

    GS Cooling Towers & components (P) LTD. is the leading manufacturer of wooden cooling Towers. It is mechanical strength, durability and high efficiency. Manpower with vast specialized experience in cooling Towers manufacturing is back bone of the organization. We have with us persons who have been entirely responsible from concept to final product manufacturing. We have major time tested development that has been incorporated in standards. Our CCT Wooden Cooling Towers are atmospheric cooling Towers and mechanical cooling Towers . Atmospheric Towers are only for smaller capacities and mechanical draft Towers are for higher range. Induced draft cooling Towers are efficiency and popular due to sucking of air from the Towers and exhaust at the top or side. The Wooden Cooling Towers are made out of pine or chirr wood after properly seasoned and chemically treated with arsenic chromate to with stand its life against biting, fungus and termite etc. Boiling waterproof plywood [marine grade], asbestos,CCA treated woods, ss or hot dip. Galvanized bolt and nuts are used in the Wooden Cooling Towers . Marine grade plywood are used for hot water chamber in timber Towers . The water is distributed by even distribution nozzles by gravity. So no extra pumping cost. The industry commitment to Research & Development delivers a constant streams of new products as well as refinement in existing materials & process.

    ...more
    Get Best Price
  • Gear Box

    Gear Box

    Request for Price

    We are engaged in manufacturing a comprehensive array of cooling Towers gear box that is mainly used for operating the vital functions in the cooling Towers . These are made from the premium grades of raw material that is procured from the reliable and established vendors. The gear box is preferable to have stainless steel piping for lubrication as well the hermetically sealed vibration switch as the gear box is working inside the cooling Towers .  

    ...more
    Get Best Price
  • FRP Square Type Cooling Towers

    FRP Square Type Cooling Towers

    Request for Price

    The Square Shape Cooling Towers designed especially for an alternative to round model for selection to our buyers. The Cooling Towers  consists of Virgin Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency & directly driven fan & Motor with spray Nozzles 'Minimum drift Losses. Hot dipped Galvanized hardware with rectangular casing body in elegant design. Square Shape Cooling Towers s/Rectangular shaped Cooling Towers that performs under induced draught counter flow principle for the operation. The hot water enters through hot water inlet that passes through perforated branch pipes, which distributes the water by the splash caps evenly. This water is spread over the heat exchange fills. Then, the water flows downward as a thin film through the fill in direct contact with ambient air moving upwards in a counter flow direction. Water cooling is affected by heat transfer in the form of convention and evaporation. Drift eliminators are mounted above the water distribution, to prevent carryover of the droplets by the fan. Drift loss is controlled by the drift eliminator to less than 0.02 % of water in circulation. High flexibility is introduced by multi-cell cooling Towers that can be customized to meet individual cooling requirements and conditions. The design further assures a high level of availability.  

    ...more
    Get Best Price
  • frp round cooling towers

    frp round cooling towers

    Request for Price

    We offer precision engineered FRP Round cooling Towers , which is widely used in various industrial applications. popular because of its lightweight and compact size. It allows quick & easy installation.

    ...more
    Get Best Price
  • frp fan blades

    frp fan blades

    Request for Price

      Product Specification  FRP Fan Blades : FRP fan blades have been specially designed aerodynamically for cooling Towers .Flow characteristic of the fan outlet ensures an optimum distribution of air across the cooling Towers , giving an added benefit to the system.  

    ...more
    Get Best Price
  • FRP Bottle Shape Cooling Towers

    FRP Bottle Shape Cooling Towers

    Request for Price

    The Round Shape FRP (Fiber glass Reinforced Plastic) Cooling Towers  also called as Bottle Shape Cooling Towers  . The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The Cooling Towers  consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor 'Minimum drift Losses' . Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.

    ...more
    Get Best Price
  • frp blade

    frp blade

    Request for Price

    FRP Fan Blades : FRP fan blades have been specially designed aerodynamically for cooling Towers .Flow characteristic of the fan outlet ensures an optimum distribution of air across the cooling Towers , giving an added benefit to the system.

    ...more
    Get Best Price
  • Drive Shafits

    Drive Shafits

    Request for Price

    We manufacture an array of drive shafts that is widely used in the cooling Towers . It is a mechanical device that is used for transferring power from the engine or motor to the point where useful work is applied. These drive shafts are known for its accurate dimension, sturdiness, longer functionality and corrosion resistance.  

    ...more
    Get Best Price
  • Cooling Tower Sprinkler

    Cooling Tower Sprinkler

    Request for Price

    Uniform distribution of water over the honeycomb fill is achived by means of automatic water sprinkler. There is no motor, but with the jet recoil force to rotate and distribution water located centrally, it consists of several PVC pipes, on which a series of apertures are drilled longitudinally, fitted on lighweight, PVC rotary head and mounted on seales ball bearings.

    ...more
    Get Best Price
  • cooling tower flow control valves

    cooling tower flow control valves

    Request for Price

    flow control valves are available in 150 mm to 500 mm dianeter range. It has cast iron body, cast iron operating handle, cast iron locking bar, stainless steel spindia and neoprene rubber gaskets.

    ...more
    Get Best Price
  • Cooling Tower

    Cooling Tower

    Request for Price

    We are leading manufacture of cooling tower ( all kind & all type-woodenfrprcc) & spares for cooling tower suitable for all make & all type. Our sister concern is g s cooling towers & components pvt. Ltd. So you can contact for cooling tower, fan assembly, drive shaft, pvc nozzel, gear box, motor, s.s.grid, fan cylinder, fan guard, f c valve etc.

    ...more
    Get Best Price
  • timber cooling towers

    timber cooling towers

    Request for Price

    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
GSCT is a new name in cooling tower industry and has been started keeping in view various difficulties faced by Indian Industry due to
Delayed response to cusomer's enquires
Late delivery
Poor erection
Poor quality of components
Unsatisfactory after sales service
last but not the least, monopolistic, high pricing, particularly of the spares
Although GSCT was started in 2009 but has gained a reputation in various industries Like
Sugar industry
Distillery
Chemical plants
Paper Industry
Rubber Industry
Steel Industry
Food Industry
Hotels
Medium and large commercial establishments
( A ) Our main strenghts are
We are an ISO 9001 - 2008 co. and have a dedicated team of Qualified Engeneers headed by an highly experianced I. I. T. Roorke Graduates.
We are NCR based and heaving two modern mfg plants.
We have regional officies all over the country including east , west and south.
We not only attend to cooling towers erected by us but also upgrade colling towers supplied by others
Our spares are compatable with other cooling tower mfg also.
We respond to the customer with in 24 hrs of receiving of calls, sms, e mails.
Our 24 hrs customer care no. is 09358438101
We assure you that our representative approach you & attend you within 48 Hr.
Now GSCT is on thee threshold of expending its's wings to lare scale industries including power sector and large steel plants
( B ) our manufacturing range
FRP COOLING TOWERS ( 5TR. To 500TR. Per Cell )
TIMBER COOLING TOWERS PACKAGE TYPE ( 5TR. To 200TR. Per Cell )
TIMBER TOWERS MEDIUM CAPACITY ( 100 CMH to 600 CMH ) / Cell
TIMBER TOWERS HIGH CAPACITY ( 500 CMH to 2500 CMH ) / Per Cell
Our towers are available in various types and shapes
FRP-BOTTLE AND SQUARE TYPE.
TIMBER TOWERS CROSS FLOW / COUNTER FLOW
RCC TOWERS CROSS FLOW / COUNTER FLOW
© our manufacturing facilites
We have modern mfg facilities which consists of following plants and equipments
Wood treatment chamber for chemical treatment with vacuum pump &pressure pump
Power hack saw
Angle bending machine
Spot welding machine
Special purpose machine for Lowers – For Wood
Fan balancing – static balancing machine capacity up to to 8.5 m dia fan
Fan balancing – static balancing machine with load & digital display for strain readings
Lathe machines of different sizes,
Universal & Cylindrical Grinding Machine.
Radial drill machines
Hydraulic Press
Vibration testing meter
DG Sets
Extuder Plant for manufcactring Pvc Bar & Drift Elimentor
Read More »

Contact Information

Govind Enterprises

  • S.p.mishra
  • Plot no.- 62, sector-3, industrial area, satabdinagar, Tejgarhi, Meerut, Uttar Pradesh
top