AAA INDUSTRIES Murlipura, Jaipur, Rajasthan

  • UPVC Filter Housings

    UPVC Filter Housings

    Request for Price

    We were the pioneers in introducing UPVC housings in India. Unplasticized Poly Vinyl Chloride (UPVC) filter housings offer a few advantages over stainless steel housings in certain applications and conditions. There are situations where you have to deal with corrosive fluids with a certain economy, UPVC housings come in handy there. They are offered off-the-shelf, hence there is no manufacturing time. One design brings the water in the top of a container through a “header” which distributes the water evenly. The filter “media” start with fine sand on the top and then graduatingly coarser sand in a number of layers followed by gravel on the bottom, in gradually larger sizes. The top sand physically removes particles from the water. The job of the subsequent layers is to support the finer layer above and provide efficient drainage. As particles become trapped in the media, the differential pressure across the bed increases. Periodically, a backwash may be initiated to remove the solids trapped in the bed. During backwash, flow is directed in the opposite direction as normal flow. In multi-media filters, the layers in the media re-stratify due to density differences prior to resuming normal filtration.

    ...more
    Get Best Price
  • Stainless Steel Filter Housings

    Stainless Steel Filter Housings

    Request for Price

    With the widest selection of stainless steel filter housings available, Classic Filters is almost certain to have the housing that meets your particular needs. If not, we’ll build you one from scratch. As well as our standard filter housings, we also offer custom-made filter housings in plastic to suit your OEM or special application. While we traditionally supply the instrumentation and analyser sample system markets, our filters can be used is a huge range of industries and applications. Constructed entirely from stainless steel, all our stock stainless steel filter housings are free of welds to comply with NACE MR-01-75. Each filter housing has a serial number to offer complete traceability of the material right back to the mill. Material certificates to EN 10204-3.1 can be supplied with the filter housing. There is no upper limit to the size we can produce. For stainless steel housings, we can construct them from any type of stainless steel. We offer these housings for a wide range of applications spread across industries like pharmaceuticals, chemicals, food and beverage, power, water and wastewater treatment etc.

    ...more
    Get Best Price
  • PP String Wound Filter Cartrige

    PP String Wound Filter Cartrige

    Request for Price

    To avoid pollution problems Recovery of finished product-increasing the plant yield For recovering particulate matter different options available are – Cyclones, Venturi, scrubbers, bag filters, electrostatic precipitators etc. Out of these bag filter becomes the best choice if following are dominant selection criteria’s: Material is expensive and hence high collection efficiency is desired. Particulate size is very fine. Material recovery in powder form is desirable & not in solution form. A conventional bag filter normally has following problems: Frequent bag choking – hence high plant shut down time. Higher pressure drops across bag filter – hence higher blower electrical power. Bag choking resulting in reduced airflow rate & therefore reduction in plant capacity. Due to the above the bag filter becomes bottleneck for plant operation.

    ...more
    Get Best Price
  • PP Pleated Filter Cartridge

    PP Pleated Filter Cartridge

    Request for Price

    We are counted among the most prominent manufacturers, suppliers and exporters of high quality Pleated Polypropylene Filters. These polypropylene filters are made from high quality raw materials using stringent conditions. Our offered filters are known for efficiency, safe application, thermally welded construction and long service life. The Pleated Polypropylene Filters are widely applied across different industries like pharmaceutical, food & beverage, oil & gas, semiconductor, chemical, paints and coatings and many more. Polypropylene filter cartridges are precisely manufactured for use in critical filtration applications within food, pharmaceuticals, biotech, dairy, beverages, brewing, semiconductor, water treatment & other demanding process industries. Polypropylene Pleated cartridges use the very latest gradient density micro fiber media technology to provide a combination of excellent micro ratings, high flow rates and high contaminant holding capacities. A special combination of polypropylene media with variation in the fiber diameter has created a gradient density matrix, ranging from open on the outside to finer on the inside. Thereby providing a filter with in filter, which considerably increases contamination holding capacity & throughputs. All components used in the manufacture are biologically safe, chemically inert and meet GMP and other international quality requirements. Polypropylene offers an extremely broad chemical compatibility making it suitable for many applications.

    ...more
    Get Best Price
  • PP Filter Housings

    PP Filter Housings

    Request for Price

    We are engaged in offering an extensive range Molded Filter Housings that are made using polypropylene. These offer chemical compatibility in various applications and finds usage in residential and commercial areas. Also, Molded Filter Housings offer grater cartridge capacity that reduces the number of vessels required in parallel installation. These can be used in place of costly low pressure stainless steel vessels and are known for its chemical resistance. These filter housings are ideally suitable for mounting in series of Polypropylene Jumbo Molded Housings. Features and Advantages: Specially designed for higher flow rate Easy mountable Ideal substitute for costly low pressure SS housings An extra large cartridge results in higher dirt holding capacity Excellent chemical compatibility Leak proof sealing Wide range of chemical compatibility. Thicker walls for more strength Mounting holes provision Lower pressure drop Higher flow Rate Lower Pressure drop Air vent available Product Durability, Stability & Reliability is higher in Polypropylene Construction.

    ...more
    Get Best Price
  • Pleated Dust Collector Bag Filter

    Pleated Dust Collector Bag Filter

    Request for Price

    A dust collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dust and other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air purifiers, which use disposable filters to remove dust. Dust collectors are used in many processes to either recover valuable granular solid or powder from process streams, or to remove granular solid pollutants from exhaust gases prior to venting to the atmosphere. Dust collection is an online process for collecting any process-generated dust from the source point on a continuous basis. Dust collectors may be of single unit construction, or a collection of devices used to separate particulate matter from the process air. They are often used as an air pollution control device to maintain or improve air quality.

    ...more
    Get Best Price
  • Pentair Replacement Aqualine Filter Cartridges

    Pentair Replacement Aqualine Filter Cartridges

    Request for Price

    Aqualine is a liquid filtration solution which provides superior flow rates and guarantees long-lasting performance. Combining a small footprint with large productivity, the Aqualine plays an important role in cost optimization of water treatment across a range of industries.Aqualine’s corrosion resistance and high flow rates have brought this filtration concept to a wide range of industries, including electronics, oil & gas, chemicals, pharmaceutical, food & beverage, desalination etc. Aqualine is widely used for particulate filtration in the pretreatment for RO systems.AquaLine housings are 8” diameter FRP housings with a rugged construction that secure long-lasting performance. They deliver superior flow rates and are a cost-effective alternative to steel equivalents. High capacity Aqualine pleated cartridges are 6.5” in diameter & 60” long and made of superior polypropylene media. The pleated construction with an outside in flow provides maximum flow rates with the lowest possible pressure drop. Minor filter change-outs saves cartridge cost and labor. FEATURES High flow filtration with a wide range of cartridge micron rating to suit your application High-performance pleated media filtration technology Long lasting rugged FRP housings from Codeline, available in 150 & 300 psi pressure rating ASME complaint FRP housings for critical applications Labor-saving quick module change Can be installed both vertically and horizontally

    ...more
    Get Best Price
  • Parker Replacement Mega Flow Filter Cartridges

    Parker Replacement Mega Flow Filter Cartridges

    Request for Price

    These are a cost effective alternative to wound and other 2½ in. OD style fi lter cartridges in high fl ow applications, such as reverse osmosis prefi ltration, where nominal efficiency is suffi cient. Each MegaFlow cartridge can handle fl ow rates up to 175gpm (662lpm), which reduces the number of cartridges required and allows for smaller housings. Each 6 inch (152 mm) diameter MegaFlow cartridge has flow capacity equal to 8 standard 2½ in. OD X 40 in. long cartridges. Positive O-ring seals and a built-in handle make cartridge installation reliable, fast & easy. MegaFlow cartridges are available in either pleated polypropylene or cellulose media with nominal ratings of 0.5, 1, 5 & 10 micron. Applications• Potable Water and Waste Water• Reverse Osmosis Pre-Filtration and  Lubricating Oil

    ...more
    Get Best Price
  • Pall Replacement Ultipleat High Flow Filter

    Pall Replacement Ultipleat High Flow Filter

    Request for Price

    It is a large-diameter, coreless,single open-ended, pleated cartridge with an inside-to outside flow pattern.The filter’s unique crescent-shaped pleat geometry,combined with its large 152.4 mm (6-inch) diameter andproprietary range of available Pall filter media, allows you to use significantly fewer filters and smaller housings forhigh flow-rate applications.High Flow filter satisfies the need for an economical and reliable filter system for high flow applications. Don’t settle for traditional bag and cartridge filter systems that won’t meet your critical filtrationrequirements. Features and Benefits• Coreless large diameter cartridge, synthetic construction,to minimize waste disposal• High flow rate per filter cartridgeUp to 40 times fewer cartridges to change outUp to 50% smaller filter system possible• Available in a variety of filter lengths and grades• Absolute-rated filter medium for reproducible performance• Features proprietary unique crescent-shaped pleatgeometry• Inside-to-outside flow pattern that traps contaminantinside the element, thus preventing polluting the treatedwater during the cartridge change-out

    ...more
    Get Best Price
  • Nylon Bag Filter/ SS Collar

    Nylon Bag Filter/ SS Collar

    Request for Price

    A dust collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dust and other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air purifiers, which use disposable filters to remove dust. Most baghouses use long, cylindrical bags (or tubes) made of woven or felted fabric as a filter medium. (For applications where there is relatively low dust loading and gas temperatures are 250 °F or less, pleated, nonwoven cartridges are sometimes used as filtering media instead of bags.) Dust-laden gas or air enters the baghouse through hoppers (large funnel-shaped containers used for storing and dispensing particulate) and is directed into the baghouse compartment. The gas is drawn through the bags, either on the inside or the outside depending on cleaning method, and a layer of dust accumulates on the filter media surface until air can no longer move through it. When sufficient pressure drop (delta P) occurs, the cleaning process begins. Cleaning can take place while the baghouse is online (filtering) or is offline (in isolation). When the compartment is clean, normal filtering resumes.

    ...more
    Get Best Price
  • Membrane Filter Cartridge

    Membrane Filter Cartridge

    Request for Price

    Membranes are thin and porous sheets of material able to separate contaminants from water when a driving force is applied. Once considered a viable technology only for desalination, membrane processes are increasingly employed in both drinking water and wastewater treatment for removal of bacteria and other microorganisms, particulate material, micropollutants, and natural organic material, which can impart colour, tastes, and odours to the water and react with disinfectants to form disinfection by-products (DBP). As advancements are made in membrane production and module design, capital and operating costs continue to decline. Advantages: High performance Compact units: less space needed than conventional treatment schemes Simple operation Membranes available can be used to separate many kinds of contaminants Disinfection can be performed without chemicals

    ...more
    Get Best Price
  • High Temperature Bag Filter

    High Temperature Bag Filter

    Request for Price

      To avoid pollution problems Recovery of finished product-increasing the plant yield For recovering particulate matter different options available are – Cyclones, Venturi, scrubbers, bag filters, electrostatic precipitators etc. Out of these bag filter becomes the best choice if following are dominant selection criteria’s: Material is expensive and hence high collection efficiency is desired. Particulate size is very fine. Material recovery in powder form is desirable & not in solution form. A conventional bag filter normally has following problems: Frequent bag choking – hence high plant shut down time. Higher pressure drops across bag filter – hence higher blower electrical power. Bag choking resulting in reduced airflow rate & therefore reduction in plant capacity. Due to the above the bag filter becomes bottleneck for plant operation.   EXCLUSIVE FEATURES OF BAG FILTER Better performance Ease in maintenance and long life Safety Instrumentation and Alarm The bag filter is compact. This results in low civil and erection cost.

    ...more
    Get Best Price
  • High Efficiency Multi Layer Bag Filter

    High Efficiency Multi Layer Bag Filter

    Request for Price

    These filter bags are made of superfine fiber and filter material which is composed of multi-layer micron level has the high ability of capturing and holding capacity of hydrocarbon. This unique product can filter efficiency can reach 25 upsilon m for some special needs, our filter bags can also use the higher filtering accuracy of filtering materials and oil absorption material, in order to achieve higher filtering accuracy. Our specialized oil absorbing material can absorb a maximum of tenfold oil. In the filter bag to add a special activated carbon filter, oil filter bags can also be better to remove some of the pigment in the liquid, odor. Our oil absorption filters are used for a wide range of processes and products such as: Storm water Steam Condensates Landfill Leachates Wood treating water Degreasing operations Refinery waste water Bilge water Etc.

    ...more
    Get Best Price
  • Glass Fibre Wound Filter Cartridges

    Glass Fibre Wound Filter Cartridges

    Request for Price

    These filters provide deep filter cartridge, high dirt holding capacity, and extremely low media migration. It is available in Polypropylene, Cotton media for a wide range of applications. String wound cartridges are available in different materials of construction offering excellent chemical compatibility with a variety of fluids and temperature ranges. A broad range of core media options provide excellent compatibility with a variety of fluids. Filter Resources can provide technical assistance with determine the most effective configuration for your needs. We specialize in water filtration system, duplex, simplex and hydraulic filters, conical strainers etc.   Features and Benefits Micron ratings from 0.5 to 100 Micron Polypropylene or Bleached Cotton media available for a wide range of applications Polypropylene or stainless steel center core available High dirt holding capacity The media and core made of FDA compliant materials Non-foaming and no fabric release Low pressure drop at high flow rate

    ...more
    Get Best Price
  • FRP Filter Housings

    FRP Filter Housings

    Request for Price

    It is a composite material made of a polymer matrix reinforced with fibres. The fibres are usually glass (in fibreglass), carbon (in carbon-fiber-reinforced polymer), aramid, or basalt. Rarely, other fibres such as paper, wood, or asbestos have been used. The polymer is usually an epoxy, vinylester, or polyester thermosetting plastic, though phenol formaldehyde resins are still in use. FRPs are commonly used in the aerospace, automotive, marine, and construction industries. They are commonly found in ballistic armor as well.

    ...more
    Get Best Price
  • Dust Collector Bags

    Dust Collector Bags

    Request for Price

    A dust collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dust and other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air purifiers, which use disposable filters to remove dust. Most baghouses use long, cylindrical bags (or tubes) made of woven or felted fabric as a filter medium. (For applications where there is relatively low dust loading and gas temperatures are 250 °F or less, pleated, nonwoven cartridges are sometimes used as filtering media instead of bags.) Dust-laden gas or air enters the baghouse through hoppers (large funnel-shaped containers used for storing and dispensing particulate) and is directed into the baghouse compartment. The gas is drawn through the bags, either on the inside or the outside depending on cleaning method, and a layer of dust accumulates on the filter media surface until air can no longer move through it. When sufficient pressure drop (delta P) occurs, the cleaning process begins. Cleaning can take place while the baghouse is online (filtering) or is offline (in isolation). When the compartment is clean, normal filtering resumes.

    ...more
    Get Best Price
  • Cotton Wound Filter Cartridges

    Cotton Wound Filter Cartridges

    Request for Price

    These are manufactured using the latest winding technology which gives true graded density with denser layers inside and coarser layers outside. This produces superior depth filters with increased filtration capacity, longer service life and higher performance that reduces overall costs. Micro String filters have high structural integrity combined with a greater voids volume. giving a lower pressure drop, much improved dirt holding capacity and efficiency compared to conventional wound filters. Features: Standard and customized sizes to fit most housings Filtration rating from 1 to 100 Micron High strength & pressure resistance Manufactured in continuous length Full range of sizes from 10” to 60” Length Excellent flow with low pressure drop High dirt holding capacity Compatible with a wide range of fluids NSF & FDA approved filter cartridges are available.

    ...more
    Get Best Price
  • Compressor Oil/Air Filter

    Compressor Oil/Air Filter

    Request for Price

    Compressed air filters, often referred to as line filters, are used to remove contaminates from compressed air after compression has taken place. When the filer is combined with a regulator and an oiler, it is called an air set. Air leaving a standard screw or piston compressor will generally have a high water content, as well as a high concentration of oil and other contaminants. There are many different types of filters, suitable for different pneumatics applications.   Unfiltered compressed air frequently contains dust, oil, rust, moisture and other harmful substances, and therefore requires filtration. In the first stage of filtration, the compressed air passes through a tube-shaped mesh filter, which creates a coalescence effect. Here bigger particles are adsorbed on the filter and the water will condense into larger droplets, which can then pass into the separation chamber. The compressed air is slowed down, which makes the particles condense on a honeycomb-like pad, allowing the water droplets to travel to the bottom of the drainage system and through an automatic or electric drain valve to the discharge. In the first filtration stage more than 95% of the water droplets, oil and large particles are removed. This practice is most common for removing water, but is also used for removing oil.In the second filtration stage the air is passed through fiber made of cotton, generating thousands of small vortices and accelerating the air.

    ...more
    Get Best Price
  • Activated Carbon Bag Filter

    Activated Carbon Bag Filter

    Request for Price

    These are designed for high effective filtration of water for certain VOC’S, pesticides, chlorine, odor & test & sediment reduction down to 5 micron. These cartridges are manufactured entirely from FDA compliance materials. They are suitable for potable water filtration, as well as many industrial, commercial & food service applications. Its nominal filtration rating makes it excellent for polishing filters of pre filters in applications which require very fine filtration. These cartridges are effective at filtering giardia & cryptosporidium cysts from potable drinking water. Features and Benefits: High lodine value High flow rate High dirt holding capacity Greater chlorine removal efficiency

    ...more
    Get Best Price
  • Absolute Rated Bag Filter

    Absolute Rated Bag Filter

    Request for Price

    The Absolute Rated Bag Elements are constructed of polypropylene meltblown microfibers, allowing for very fine particles capture at high efficiencies. All Absolute Rated filter bags are over 97% efficient at their suggested micron rating. The bag construction makes this filter an easy to use, convenient, high performance alternative to filter cartridges. The filter contains over 30 sq. ft. of usable filter media. This compares with only 4.4 sq. ft. for most filter bags and only .65 sq. ft. for most cartridges. Maximum flow per bag is 40 gpm.The two most used reported media ratings are nominal and absolute micron rating.Absolute rating. The absolute rating, of cut-off point, of a filter refers to the diameter of the largest spherical glass particle, normally expressed in micrometers (mm), which will pass through the filter under laboratory conditions.

    ...more
    Get Best Price
  • 3M Replacement High Flow Filter Cartrige

    3M Replacement High Flow Filter Cartrige

    Request for Price

    OEM stands for “Original Equipment Manufacturer”. Its meaning has evolved over the time. In earlier times, it referred to a company that manufactures products to be used as components by another company in its end products. It designed to remove contaminants from engine oil, transmission oil, lubricating oil, or hydraulic oil. These are used in many different types of hydraulic machinery. Gas turbine engines, such as those on jet aircraft, also require the use of oil filters. Aside from these uses, oil production, transport, and recycling facilities also employ filters in the manufacturing process. Advantages: High performance Compact units: less space needed than conventional treatment schemes Simple operation Membranes available can be used to separate many kinds of contaminants Disinfection can be performed without chemicals

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
AAA Industries established in 2007 is one of the leading manufacturer of liquid filters with international quality and replacement capabilities and features in India. AAA Industries is a renowned among the well-known developers, manufacturers and suppliers of a wide multiplicity of industrial liquid filters in India and also has a reach experience tech team.
We have been working in various liquid and oil filters applications since last 12 years. We have well equipped laboratory to check all the technical specification at the customer end and in our factory. We also have state of art manufacturing set up of all the imported machine to give best quality products. We are the only producer in the country for liquid pleated filters in non-woven fabric. We have capabilities to meet adverse process condition including high temperature, acidic and highly viscous fluid applications.
AAA Industries is continuously striving to develop new material technologies and improving on quality standard to be more environment friendly.
The reason to have AAA Industries for being your choice is our great ability, strong responsibility and high efficiency team to catter you round the clock.
Our products are used in innumerable number of applications such as food & beverages, sea water desalination plant, power generation plant, chemical industry, oil & gas, steel plant field, paint and coatings etc,.We are committed to cost effective manufacturing process for your OEM & ODM.
Our fabrics and further filter elements help our clients to gain utmost Filtration efficiency in least amount of time and Filtration expenditure. We have proficiency in giving suggestions and solutions to loads of Filtration problems on the basis of our familiarity and understanding in this field.
No matter which industry you are in and what trouble you are facing, our services and products will always help you out and achieve your goals.
Read More »

Contact Information

AAA INDUSTRIES

  • AAA INDUSTRIES
  • Plot No. 92-A, Shankar Heights,Shiv Vihar Opp Rd No.5 Vishwakarma Industrial Area, Murlipura, – 302013 ., Jaipur, Rajasthan
top