Agaram Industries Aminjikarai, Chennai, Tamil Nadu

wet bulb globe temperature (wbgt) meter or heat stroke checker kyoto electronics manufacturing co., ltd. Are leaders in the field of portable instrument manufacturers. These instruments are mainly used in industries such as pharmaceutical, food, confectionary, and chemicals.  one such instrument is the wet bulb globe temperature (wbgt) meter, also called the heat stroke checker. As the name suggests, this hand-held instrument gives you critical atmospheric indicators including the wet bulb globe (wbgt) value, temperature, relative humidity, and globe temperature, which help predict the occurrence of heat strokes. These instruments find application in sports—both indoor and outdoor—factories, construction sites, field works, and many more.  wbgt meter or heat stroke checker – 203a / 203b the wet bulb globe temperature (wbgt) meter manufactured by kyoto electronics manufacturing co., ltd. In japan is an ingeniously built hand-held instrument that is extremely simple to use. It is designed for both outdoor and indoor use and all it needs is 2 aaa batteries. It can be configured to raise an alarm when the wbgt value goes beyond a certain limit. This helps sportspersons get notified when the atmospheric conditions are no longer suitable for training. This intelligent device can store up to 500 values of all the indexes that are displayed at one instance. The instrument is also accompanied by a connecting cable which can be used for transferring the saved data on to a computer. Kem also offer stands for the instrument to be mounted, so that they can be stationed in a single place. 203a / 203b feature highlights • designed for both indoor and outdoor use. • easy to carry and use. • quick index measurement. • built-in storage and ability to transfer data to computer. the wbgt value displayed by the instrument can be used to gauge the level of exertion that the sportsperson can subject themselves to. The following is a table indicating the response action that needs to be taken corresponding to the wbgt value recorded.   wbgt [°c] -> types of warning and required rest below 21 -> safe (needs occasional supply of water) 21 - 25 -> note (needs immediate supply of water) 25 - 28 -> caution (needs to take rest) 28 - 31 -> warning (stop active physical exercise) above 31 -> dangerous (cancel physical exercise) type and model name : wbgt-203a/213a heat stroke checker measurement data : wbgt, temperature, relative humidity, globe temperature and wbgt data can be switched outdoor or indoor. measuring range wbgt     : 0 to 50°c temperature                     : 0 to 50°c relative humidity              : 10 – 90%rh globe temperature            : 0 - 60°c (wbgt-203a),  0 - 80°c (wbgt-213a) accuracy wbgt                 : ±2.0°c (15 to 35°c) temperature                     : ±1.0°c (15 to 40°c) relative humidity              : ±5.0% (20 to 80 %rh at 25°c) globe temperature            : ±2.0°c (15 to 50°c) power source                   : 2 aaa dry cells

Brand Name : Kyoto Electronics Manufacturing Co., Ltd.

Item : WBGT Meter (or) Heat Stroke Checker

Principle : It Is Used To Estimate The Effect Of Temperature, Solar Radiation And Wind Speed On The Human Body.

Power Source : AAA dry cell

Application : Industrial

Condition : New

Automatic Grade : Semi Automatic

Feature : Easy To Use, Proper Working, Superior Finish

Weight : 400-500g

Color : White

Application : Indsustrial Usage

Body Material : Stainless Steel

Power Source : Electric

Feature : Durable, Light Weight, Stable Performance

Warranty : 1Year

Features For the pharma among other tests, the Gelatin samples are the most popular one. This is also known as Bloom Test. Apart from that, the system can also analyse Tablet hardness, Extrusion force etc. EZ-LX is a Long Stroke model with a stroke of upto 920mm. This system's capacity, test speed range and return speed are the same as that of SX. The EZ-LX is a perfect choise for testing rubber, film and other materials with long elongation. This EZ-LX HS is the same as that of LX but with a test speed range of 0.001 to 2000 mm/min and with a return speed of 3000 mm/min. This is ideal to improve the sample throughput and thus suitable for factories where the number of samples are typically more in number. The key feature of the EZ system is in its capability to data sampling speed of 1msec, which brings great effect in plotting the Texture profile curve for the tested samples. For the Pharma and the Customers who are adhering to FDA regulations, the EZ-Test systems would be offered along with "LogiLab 21 CFR Part 11 Gateway" software.

Data Capture Travel : 1000 Hz

Accuracy : +- 01 % of set speed

Application : Industrial Use, Laboratory Use

Surface Tensiometer: The measuring methods used in Kyowa surface tensiometer are the Wilhelmy plate method, du Noüy ring method, pendant drop method, and maximum bubble pressure method.The Dyne Master tensiometer series starts with model DY-300 and the most sophisticated model is the DY-700.    DY-300: When interfacial tension is measured, the system is delivered with du Noüyring and a bigger sample receptacle with graduation. Operation can be done using either the right or left hand, and the cell can be viewed during measurement.The light weight allows operators to conduct experiments without much effort. Viscous liquidsup to 2000 mPa?s can be measured. Displays: Density - Temperature compensated density and specific gravity - Percentage of Brix - Alcohol concentration - Sulfuric acid concentration - API degree - Baume degree– Plato - Proof degree Graphic LCD display: Temperature - Sample number - Auto sensing oscillation stability - Auto data saving - Auto data output - Data deletion - Battery capacity The life of battery is twice that of conventional makes and results in much longer operation time.The sampling volume and speed are to be controlled using a single hand. Features: (i) The pre-wetting function eliminates measurement errors caused by unsuccessful wetting of plate. (ii) Applicable for surface tension measurements of liquid samples with a volume as small as 1mL with optional 1cc lab dish. (iii) Ideal for Quality Control purposes with the repetitive measurement function. (iv) Lamella length measurements and du Noüy Ring method with a platinum ring. (v) Measurement of liquid density and sedimentation behavior with optional kits. (vi) Temperature dependent measurements (optional with temperature control stages and peripheral devices) Industries: Paint |Ink |Rubber |Pharma |Ceramic | Nano-technology |Polymer | Research institutes |Measurement of interfacial tension (IFT) |Transformer oil quality study

Application : Laboratory, Industrial

Application : Auto Testing Machine

Feature : Superficial & interfacial tension, Powder wettability

Portable Refractometer The refractometer is a laboratory device primarily used to measure the refractive index (RI) of samples. The refractive index is an indicator of the behavior of light on that sample. By knowing the refractive index, one can confirm the purity of a sample or measure its concentration. In cases of a sugar solution, the refractive index can be used to determine the sugar content. In scenarios like that in a production environment, a portable refractometer would be best suited because of its compact size and quick operation. KEM’s portable refractometer: RA-130 Kyoto Electronics Manufacturing Co., Ltd. manufacture their own line of portable instruments in Japan, with the portable refractometer as a prime product. The automatic digital refractometer, called the RA-130 is a light-weight instrument that does not require any technical expertise to operate. You can either allow the sample to drip onto the prism or the prism of the portable instrument can be dipped into the sample beaker to measure refractive index. It is a microprocessor-controlled instrument with a bright, clutter-free LCD display. It is equipped with an infrared port for transmitting data to a computer. RA-130 feature highlights • Measurement range: RI - 1.3200 to 1.5000 & 0 to 85% Brix. • In-built data storage of 1100 measurement results. • Display measurement of refractive index, temperature compensated refractive index, percentage of Brix, HFCS42, HFCS55, and temperature in degree Celsius and degree Fahrenheit. • Auto-inactivity detection switches the instrument off when it hasn’t been used for a long duration. This increases the life time of the batteries. • Option of automatic data saving and automatic data output. Uses of portable refractometers To measure the: • Concentration control on pharmaceutical and medical liquid samples. • Sucrose concentration in fruits juices. • Sugar content in beverages and liquid seasoning.

Type : Portable

Brand Name : Kyoto Electronics Manufacturing Co., Ltd.

Power : Electric

Hs Code : 90275020

Portable Digital Density / Specific Gravity Meter The density meter, also called the specific gravity meter, is an instrument used in laboratories and factories to measure the density of liquid samples. Of the many types of density meters available, the most popular and reliable version is the one based on oscillation of the U-tube. The underlying principle in this density meter is Archimedes’ principle in combination with microelectronics technology. KEM’s DA-130N Kyoto Electronics Manufacturing Co., Ltd. manufacture their own line of portable instruments in Japan, with the portable density meter being an important product. The portable density meter, named DA-130N, is widely used by many major food producing companies because of its compact and ingenious design. The DA-130N can be used to analyze liquids with a viscosity of up to 2000 mPa*s. It has a port through which samples can be injected into the U-tube by means of a syringe. Being a microprocessor-controlled system, it weighs just over 350 gms with a working principle that is approved by the American Society for Testing and Materials (ASTM). DA-130N feature highlights • Displays measurement of density, specific gravity, temperature compensated density, specific gravity, percentage of Brix, alcohol concentration, sulfuric acid concentration, API degree, Baume degree, Plato degree, and Degrees proof. • Operation can be performed in a single hand. • Separate housing of electronics which protects them from volatile samples and fumes from acids. • Auto-inactivity detection, which increases the life time of batteries. • In-built data storage of up to 1100 values. • Option to export data to personal computer via IrDA. Uses of portable density meters • Quality of petroleum and fuels. • Analysis of volatile liquid samples. • Testing of batteries. Industries Beverages | Food Testing | Petroleum | Chemical products |Pharmaceuticals |Alcoholic beverages |Battery acids

Portable Brix Meter: The Brix meter is a device widely used in factories to measure the amount of sucrose in distilled water. This is a critical value in the beverages sector, since the quantity of sucrose directly impacts the sweetness of the product. KEM’s portable Brix meter: BX-1 Kyoto Electronics Manufacturing (KEM) Co., Ltd.manufacture a variety of portable instruments such as refractometers, density meters, and Brix meters. The Brix meter, BX1, is an automatic, digital system with an LCD display. This instrument is equipped with temperature compensation. BX-1 feature highlights • Measuring range of 0 – 85 % Brix and resolution of 0.1 % Brix. • Brix of samples ranging between 10 °C and 75 °C can be measured. • Auto-inactivity detection, which increases the life time of batteries. • IP65 casing to protect the instrument from splashes and dust.

Weight : Approx. 100g (Excluding batteries)

Calibrating a portable Brix meter Calibrating any instrument is a must, especially if it is used for quality control. Calibrating your instrument helps you notice any error that would have crept into your instrument as a result of wear and tear over the years. Calibration is the process of comparing a known measurement, called the standard, with the measurement obtained using your instrument at hand. In the case of calibrating a portable Brix meter, the standard in most cases is distilled water. On dropping a few drops of distilled water onto the prism, the LCD display in the instrument must show a reading of 0 Brix. Feature highlights Measuring range of 0 – 85 % Brix and resolution of 0.1 % Brix. Brix of samples ranging between 10 °C and 75 °C can be measured. Auto-inactivity detection, which increases the life time of batteries. IP65 casing to protect the instrument from splashes and dust.

Certification : ISI Certified

Condition : New

Feature : Accuracy, Easy To Fit, Measure Fast Reading, Perfect Strength, Robust Construction, Rust Proof

Certification : ISO 9001:2008

Voltage : 220V

Automatic Grade : Semi Automatic

Driven Type : Electric

Warranty : 6 Months

The mobile fill station is an accessory for the Polarimeters from Rudolph Research Analytical, USA. It is an in-house invention that aids in filling the polarimeter cells without much effort, which otherwise is a cumbersome and error-prone task. Features: This accessory is an innovation from Rudolph Research Analytical(RRA) which helps chemists fill sample tubes without any bubbles. When the sample tubes are held at the correct angle and filled from the bottom inlet port in a cell, the cell is easily filled with no possibility of leaving any air bubbles.  This is a portable and external accessory. Rudolph recommends not to fill polarimeter cells fully. This is to avoid damage due to spillage of strong acids or bases. By design, the filling station will hold the cell at a suitable angle. You would have to simply place the polarimeter cell in the filling station and again fill the cell from the lower inlet. As the cell becomes fully loaded,the sample would begin to appear at the upper inlet. At that moment, you should cap off the upper inlet and lower inlet. The cell is now fully loaded and air bubble free. The filling station includes a light that will go from dark to bright white, when the filling process is over.

Driven Type : Electric

Application : Industrial, Laboratory

Type : Polarimeter

Weight : 40-50 Kg

Country of Origin : USA

Voltage : 220V

Condition : New

Driven Type : Electric

Warranty : 6 Months

Blue Clean room Wiper  ISO Class 5-6 (100-1000) Clean room Wipe Distinctive blue color is perfect for coding wipers Soft, non-abrasive wiping surface Size available: 13″ x 13″ WIPE MATERIAL: Poly / Cellulose Blend CLEANROOM CLASS: ISO 5 (Class 100), ISO 6 (Class 1000)Description: Nonwoven Polyester / Cellulose Blend | ISO 5 Class 100 – ISO 6 Class 1000 | Blue Clean room Wipe NOVA-Strong Blue clean room wipes are made from a synergistic blend of virgin polyester and cellulose that is hydro entangled into a uniform, absorbent, and super-tough fabric. The distinctive blue color is perfect for coding wipers.. These wipes are manufactured and double-bagged in a controlled environment. Wipes made with this fabric are converted in a class 100 clean room (ISO 5). Features and Benefits  Blue wipe color allows coding by application Polyester-cellulose blended substrate offers tough, absorbent and abrasion resistant characteristics Production process guarantees extremely low particle generation and chemical extractable Compatible with virtually any solvent or solution for cleaning and wiping Double bagged packaging for added cleanliness

Size : 34 X 35 (cm)

Brand Name : NOA Strong Blue

Application : For Removing Dust And Particle Deposition In Clean Rooms And Other Similar Places

Color : blue

Ozu Corporation are the manufacturers of disposable lab wipes in Japan. They produce variety of wipes that vary based on the lint content, size, and durability. These wipes are meticulously designed keeping in mind the needs of modern-day factories and laboratories. These wipes are almost lint-free and would do an efficient job of cleaning your equipment without harming them. Their non-abrasive nature makes sure that you don't leave scratches or marks on the surface of the machine. Pure Lead ST280 The wipes in Pure Leaf ST280: Are disposable. Can be used for cleaning lab instruments and electronic items. Have low lint. Are solvent and chemical resistant.

Material : Non-woven microfiber

Application : Cleaning of laboratory instruments and factory machinery without causing damage.

Feature : Lint free, non-woven, and resistant to chemicals

Color : White

Size : 210 * 110 (mm)

Material : Paper

Application : Cleaning of lab instruments and factory machinery

Application : Agriculture

Accuracy : High & Consistent

Moisture meters are used to determine the moisture and temperature of grains, fodder, or straw by applying the conductivity principle. The model Wile 26 is a simple, yet ingenious system with a digital screen. It also gives you the option of calibration with a known sample. The results of those known samples have to be analyzed with approved methods such as the oven moisture method, so that there is some kind of traceability for the whole analysis. The models Wile 55 and 65 are for grains and they also come with a carrying case to make it easily portable. These models are used to determine the time of harvest and delivery and also to decide when to dry or ventilate the grains.  

Type : Grain Moisture Meter

Application : Moisture Measurement

Body Material : Stainless Steel

Feature : Accuracy, Durable, Low Power Comsumption, Stable Performance

Brand Name : Chopin Technologies

Warranty : 1 Year

Temperature : 10-55 degree C

Accuracy : +/-0.2%

Warranty : 1 Year

Weight : 40kg

Feature : Accuracy, Multi Jet

Voltage : 220V, 380V

Application : Industrial

Automatic Grade : Automatic

Display : Digital

Series 2 Force gauges are designed for basic tension and compression force testing applications upto 500 lbF (2,500 N).  The accuracy is 0.5% fs and the sampling rate is 500 Hz.  The measurement units are lbF, kgF & N.

Size : 4inch

Type : Digital Force Gauge

Material : Stainless Steel

Certification : ISI Certified

Application : Laboratory, Industrial

Color : Grey

Condition : New

Display Type : Digital

Automatic Grade : Automatic

Feature : Accuracy, Easy To Fit, Measure Fast Reading, Perfect Strength, Robust Construction, Rust Proof

Measuring Range : 500 N

Brand Name : Mark-10

Application : Measuring The Tensile Or Compression Force During A Push Or Pull Test

Power : Electric

Range : Upto 50 Kg

Unit : KN, LbF, KgF, N

Measuring Range : 0-500 N / 0-50 Kgs

Color : White and Grey

Material : Paper

Application : Lens Cleaning,camera Cleaning,3-d Glass Cleaning

Size : 6inch

Type : Digital Torque Gauges

Material : Stainless Steel

Shape : Rectangular

Certification : ISI Certified

Application : Force Measurement

Color : Grey

Condition : New

Display Type : Digital

Feature : Accuracy, Easy To Fit, Measure Fast Reading, Perfect Strength, Robust Construction, Rust Proof

Feature : Fine finish , Durable , Optimum quality