Optical Smoke Detector Dealers in Ahmedabad (3 products available)

Country of Origin : Made in India

Product Type : Smoke Detector

Usage/Application : All Applicaations Usages

Alarm Sensor Type : Optical

Color : WHITE

Automation Grade : Automatic

I Deal In : New Only

Wireless : No

Tempreture Detectors   Multisenor Detecotrs :     The Context Plus XP95 multisensor detector contains an optical smoke sensor and a thermistor temperature   sensor whose outputs are combined to give the final analogue value.   The multisensor construction is similar to that of the optical detector but uses a different lid and optical mouldings to accommodate the thermistor temperature sensor. The sectional view (below) shows the arrangement of the optical chamber and thermistor.   The signals from the optical smoke sensing element and the temperature sensor are independent, and represent the smoke level and the air temperature respectively in the vicinity of the detector. The detector’s microcontroller processes the two signals. The temperature signal processing extracts only rate of rise information for combination with the optical signal. The detector will not respond to a slow temperature increase – even if the temperature reaches a high level. A large sudden change in temperature can, however, cause an alarm without the presence of smoke, if sustained for 20 seconds.   The processing algorithms in the multisensor incorporate drift compensation. The control panel must not have a drift compensation algorithm enabled.   The sensitivity of the detector is considered the optimum for most general applications since it offers good response to both smouldering and flaming fires.Note: In situ testing of the multisensor should be carried out as for smoke detectors.   Optical Smoke Detectors:   The Context Plus XP95 optical detector uses the same outer case as the ionisation smoke detector and is distinguished by the indicator LED which is clear in standby and red in alarm. Within the case is a printed circuit board which, on one side, has the light proof labyrinth chamber with integral gauze surrounding the optical measuring system and, on the other, the address capture, signal processing and communications electronics.   An infrared light emitting diode within its collimator is arranged at an obtuse angle to the photo-diode. The photo-diode has an integral daylight-blocking filter.   The IR LED emits a burst of collimated light every second. In clear air the photodiode receives no light directly from the IR LED because of the angular arrangement and the dual mask. When smoke enters the chamber it scatters photons from the emitter IR LED onto the photo-diode in an amount related to the smoke characteristics and density.

Fire Alarm Control Panel, three phase ups, Fire Suppression System