AIP Valves Rajendra Place, Delhi

1.Strainer: It can estimate the participation of dirty things by the pressure observed gauges installed at both ends of the strainer to discharge timely. It can also be remotely monitored if you install a transmission of pressure difference.   2.End Cap: There is a drain hole in the lower part of the cap which could discharge the small particles directly. Small ball valve plug could  also be installed in the hole   3.Rubber:Rubber Washer are designed in the both ends of the filter to improve the sealing reliability.   5.Filter: Turn-up design  for the filter could strengthen the filter and make the sealing much better

  Materials used conform to the requirements of IS : 14846. The valves are manufactured with stainless steel/brass stem of non-rising type and bronze rings fitted in machined recesses in body and wedge. The ends are flanged and drilled to IS :1538/lS :14846. Valves of Sizes 200 mm and above have separate stuffing box. High grade gland packing is used. The valves are marked with ISI mark.   OUR QUALITY CONTROL PROCEDURESAS PER ISO 9001 ENSURECONSISTENT PRODUCT QUALITYFOR OPTIMUM CUSTOMER SATISFACTION MATERIALS All parts are manufactured out of best available graded materials after proper testing. Materials used for different parts are detailed her below

MATERIAL SPECIFICATIONS Body & Disk Cast iron I.S. 210 FG 200Cast Steel ASTM A-216 Grade WCBCast Stainless Steel CF8 & CF8M Seat & Body ‘O’ rings Nitrile, EPDM, Viton, Silicon, PTFE Other materials available on special request INSTALLATION The short face to face dimensions and the low weight guarantee a simple and space saving installation between the bolts of the connecting flanges.Flange sealing is obtained by O-rings. APPLICATION Water, Air, Oil, Gas, Steam or any other fluid. DESIGN FEATURE The design has distinct advantages over conventional swing check valves. Structurally sound Hydraulically engineered Stronger, lighter and smaller in size It weights 1/8th weight of conventional valve Lower pressure drop, hence lower energy loss.   Flexible installation: Can be installed in horizontal or in vertical line, without any special pipe support. Water hammer and slamming almost eliminated. The light weight and short face to face dimensions of valve make it easy to install between standard gasket and line flanges.

Product Introduction Light-type stainless steel multistage centrifugal pumps are non-self priming pumps absorbing the advanced technology froom home and abroad. Adopting standard motor and alloy mechanical seal, which make the replacement more convenient. The overflowing part is made from stainless steel, applicable for light corrosion medium. Relying on the high efficiency, energy saving performance, reliable quality, wide usable range, the products are recieved the great popularity after they have been launched. Feature   The Premium hydraulic model and advanced workmanship greatly improve the pumps performance and extend the service life. Adopting alloy and fluorin rubber for the mechanical seal, which ensures the pumps reliable operation and endures high temperature of transmission medium. As the overflowing part of pump is stamped and welded by stainless steel plate, which is suitable for slightly aggressive liquids. Compact design, small in size, light weight, low noise, excellent energy saving performance, easy to maintenance. Inlet and Outlet of the pump stand in the same line with the pump base, which can be used directly in the pipeline. Clients can allocate the motor based on their own needs. We provide the intelligence protector to avoid dry running, default phase and over loading of the pump to meet customer’s demand. Application   Water supply : Water filtering and water delivery in water plants, water delivery for sub-water plants, pressure boost in main pipelines and in high-rise buildings. Industrial pressure boost : Flow water system, cleansing system, high-pressure washing system, fire extinguishing system. Industrial liquid delivery : Cooling and air conditioning systems, boiler water supply, condensation system, machine tool, transmission of the acid and alkali mediums. Water treatment(Water purification): Ultra-filtration system, reverse osmosis system, distillation system, water treatment system for separator and swimming pool. Irrigation : Irrigating of crops, spray irrigation and drop irrigation. Working Condition   Liquid temperature : Normal type 0 °C – + 68°C, hot water type 0°C –  +120 °C Ambient temperature : -15 °C – + 40 °C The maximum working pressure : 3.0Mpa/30Bar When the density or viscosity of the transmission medium exceeds that of water, it is necessary to select to a driving motor of high-power. Motor’s Selection   Full-enclosed and ventilating two-pole standard motor Protection class : IP55 Insulation class : F Standard voltage/Frequency : Single phase / Three phase; 50Hz/60Hz.i>

Technical Data RPM: n=2850r/min(50Hz); n=3450r/min(60Hz) Model   Single-Phase Power   KW HP Inlet(inch) Outlet(inch) Max.Flow(m3/h) Max.Head(m) Max.Suction(m) Dim.(mm) G.W.(kg) 20Loading Qty (pcs) QB60 0.37 0.5 1 1 1.6 33 8 280*140*170 5.3 3600 QB70 0.55 0.75 1 1 2.4 48 8 335*190*210 9 2100 QB80 0.75 1 1 1 3 60 8 340*190*210 9.5 2100 SQm60 0.37 0.5 1 1 1.6 33 8 280*140*170 5.3 3800 SGJW37 0.37 0.5 1 1 2.5 32 8 390*190*230 9.5 1700 SGJW55 0.55 0.75 1 1 3 41 9 475*195*240 17 1200 SGJW75 0.75 1 1 1 5.4 46 9 475*195*240 18 1150 SGJW110 1.1 1.5 1 1 6 52 9 475*195*240 18.5 1100 JET80L 0.55 0.75 1 1 2.5 42 9 475*190*220 17.5 1200 JET100P 0.75 1 1 1 3.5 46 9 475*190*220 18 1150 JET100L 0.75 1 1 1 3.5 46 9 475*190*220 18.5 1100

SPECIAL EFFECTS Compact Design-Full port offers mass flow Simple structure,Light & Smooth ” Takes ver low Torque Easy maintenance,Replaceable Seal Design Self Sealing,Self Cleaning,The under cut Disc Segment and Seal Tends to wipe Away The material from the Sealing Area Gland pressing plate- Ensures complete utilization of gland seals. Sperical Disc Valve has been proved as Superior to other valve in many Aspects,particularly in Weight Space Pressure Rang Multiple Operations Maintenance Ease Torque & Economy FEATURES Double Eccentric Disc Design Construction Heavy Duty Wafer and Lugged Body Design Options Bi-Directional Shut-Off Performance Available in 4 Seat Design Options:-Soft seated,Fire safe & Metal to metal (2 versions) Two piece Shaft for Maximum Flow and Minimum heal loss Single piece Shaft for Greater Accuracy and less disc deflection under high pressure Accessible Packing adjustment without Operator Removal Fast and Simple Seat Replacement Quadruple Shaft bearings to ensure stability during high pressure, high cycle Applications FEATURES Double Off-Set Design to minimize seat wear and extended seal life. Available in Investment  Cast(up to 16″) & sand cast(up to 48″) Positive Sealing which is mechanically achieved and does not rely on line pressure assistance Compact Design, Minimizes Weight,Installation and maintenance Cast. Suitable for mono-directional use on end-of-line Service. Long life durability due to double off-set operation principal minimizing seat wear. Uninterrupted Gasket Surface. Valve most suitable to provide the ultimate dependable economical flow control Available seat design option:-Soft Seated , Fire Safe and Metal seat METAL TO METAL:-Combination of seat and disc materials suitableup to 600 C Seat Leakage Rate Class IV as per ASME/FCI 70-2

Product design and production is in accordance with GB1T28636. Flange connection complies with BS4504, DIN 1092 and GB/T 17241.6 Face-to-face dimension complies with EN 558-1. GB1T12221 Inspection and acceptance comply with GB/T 28636, GB/Ti 3927.

Application Water meter, water leak detection system and water treatment etc equipment HVAC and fire works. Automatic drain system Irrigation etc small control equipment

Features : Smart Design with High Flow Characteristics Pressure reducing valve can be installed in water supply, air conditioning and fire control systems to maintain the constant outlet pressure. The pressure reducing valve used a sub-valve(pilot valve) to control the main valve. When the outlet pressure reaches the setting range of pressure reducing pilot valve, the pilot valve will automatically sense the outlet pressure and adjusting the pressure of the back pressure chamber in the main valve, so the valve gate can be opened and consequently maintains the outlet pressure. The pressure gauge on the pilot valve shows the outlet pressure. When the outlet opens, the valve of the pressure gauge will decrease.

PART DESCRIPTION MATERIAL DETAILS 1 BODY CAST IRON SCREWED OR FLANGED/SCREWED ONLY UPTO 2″(INCH) SIZE 2 BONNET CAST IRON SQUARE/ROUND SHAPE 3 COMPRESSOR CAST IRON WITH FINGURES SUPPORTING THE DIAPHRAGM WHEN CLOSED 4 HAND WHEEL CAST IRON STEARING TYPE WHEEL FOR EASY OPERATION 5 SPINDLE MILD STEEL CAN BE MADE OF BRASS/STAINLESS STEEL ALSO 6 NUT & BUSH GUN METAL & BRASS FOR EASY & SMOOTH OPERATION 7   8 DIAPHRAGM   BOLTS OR STUDS RUBBER   MILD STEEL NATURAL RUBBER, NEOPRENE RUBBER, HYPALON & TEFLON.   REINFORCED TO STAND HEAVY PRESSURES

Product Introduction P series high quality circulation pump applies Interior scale prevention treatment, equipped with ceramic bearing, offers the characteristics of stable operation, leakage free and super quietness.Product range covers 6 series: XPS series adjustable speed high quality circulation pump, XP series unadjustable speed high quality circulation pump, ZP(S) series automatic pressurization high quality circulation pump, BPS series automatic exhaust high quality APS series Intelligent frequency converter circulation  pump with energy efficiency classified as grade A.The products are widely used in HVAC circulation, domestic pressurization, solar pressurization, Industrial support, cold-hot water circulation, wall-mounted boiler, etc.   Product Structure This product is composed of pump and single phase motor.The pump is mainly composed  of impeller and pump body. Motor is mainly composed of stator, rotor, screening can, and bearing etc.;Pump body material : Bronze, brass, cast iron or plastic.The stator and rotor are canned by the stainless can, and the pump and motor are static sealed, leak free.This product is applied Internal recycle, and the bearings is lubricated by the liquid pumped which cools the motor. Motor: Insulation class: F & H; Frequency: 110v – 240v; Herz: 50hz / 60hz.XP series motors are of fixed rotating speed while XPS series motors are of 3 speeds.

CAST IRON DOUBLE FLANGED SWINGING DISC TYPE NON-RETURN OR REFLUX VALVE   DESIGN FEATURES   Manufacturing Range From 50MM To 60MM Manufacturing Standard Is: 5312, PART-1, BS-5153 Flange Faced & Drilled As Per Is: 1538, BS:10 Table ‘D’ Or ‘E’/ANSI B 16.0 CL 125/150/DIN Valves With Stainless Steel Trims Can Be Offered Valves To ASA Or DIN standard Can Be Offered   OPTIONAL FEATURES AIR RELEASE PLUC BY-PASS VALVE DASHPOT LEVER AND WEIGHT          

SizeSuitable TemperatureMounting PadFace to FaceEnd ConnectionInspection & Test DN40-DN300-20 -120ISO 5211API609,BS5155(short), ISO 5752-20,JIS B 2002 46ASME CLASS 150, JIS B 2238/2239 10KAPI598/IS13095/BS

Technical Standard   Normal pressure: 2.0MPa Working medium: water,gas Working temperature: -20°C

AlP-series static balancing valve is static hydro-working valve, having good flow characteristics, enabling proper flow allotment,and making quantitative flow, therefore effectively dealing with the indoor temperature about unevenly heating and cooling problem existing in heat supply (air-conditioning) system. As the static balancing valve having equipped with indicator, open locking device, and small pressure valve for flow measuring, it is only installed proper specifications of static balancing valves in each branch and users’ pipeline entries. Upon locking after once-for-all adjustment with special instrument, the total amount of water in the system could be controlled within a proper range so as to overcome the improper phenomenon of “large flow but smalldifference in temperature” The static balancing valve becomes an ideal product used in heating system with highest medium temperature up to 100 C.The balancing valve’ s working ways include hydraulic automatic control and manual control but without extra conditions. The working temperature is normal one, with EN 1.6MPa or 2.5MPa, and the circumstance shall be clean and good.Application: lt is widely used in pipelines of central air conditioning system, water supply and drainage, fire protection, petroleum, and chemical and engineering,as well as industry and mining enterprises, etc., especially used in pump house of the central air-conditioning system Technology Feature Y type straight structure, low flow resistance, enlarging flow capacity. Equipped with Internal lift stem without leaving operation room in advance. Digital display hand wheel makes operation easy, swift and reliable. Multiple sealing structure applied to stem Anti-cavitation shield added, affectively protect valve from cavitation impact, and reducing noise and vibration. Hygienic and corrosion resistant, stem, limit rod, gland nut,and regulating screw are made of stainless steel or copper. The whole valve complies with sanitary standard, applying to potable water piping, hygienic, safe and reliable. Locking setprovides after adjusted balancing valve with reliable and safe lock. Compiled Standards Product design and production is in accordance with GB1T28636. Flange connection complies with BS4504, DIN 1092 and GB/T 17241.6 Face-to-face dimension complies with EN 558-1. GB1T12221 Inspection and acceptance comply with GB/T 28636, GB/Ti 3927.

Technical Standard Normal pressure: 1.6 MPa Working medium: water Working temperature :-0 C

We are one of the preeminent manufacturers and suppliers of flexi pavers and shot blasted pavers. These pavers are developed keeping into consideration the current market trends.    Finish Options Shotblasted Shotblasted and Coated   Applications   Exteriors and Open spaces like Foot-paths, Side-Ways, Garage, Parking, Open areas, Promenades, Swimming Pool Decks, Foyers, Building Compounds, Drive-Ways, Porticoes, Car ramps, Corridors & Verandas, etc.- where good finish, antiskid properties or textured look is desired.   Benefits Exciting combinations with coloured aggregates possible. Antique finish and effect Anti-Skid Surface Ready to use surface Enables very even Coating