Ajinkya Electronic Systems, Mumbai Mahim, Mumbai, Maharashtra

  • Six Digit Ampere Hour Meter IM2506

    Six Digit Ampere Hour Meter IM2506

    Request for Price

    IM2506 model which comes with 6 digit display as compared to IM2501 Ampere Hour Meter which can show AH count upto 4 digits. This model can be used with any kind of load circuit as the shunt value can be programmed by the user as per the application. The instrument is provided with one relay output to alert the user when the sufficient charge has been delivered using alarm, tower lamp, etc. It can also be used to directly cut off the rectifier.

    ...more
    Get Best Price
  • Programmable Ammeter IM1953

    Programmable Ammeter IM1953

    Request for Price

    An ammeter is a measuring device used for measurement of electric current in any electrical circuit. The majority of ammeters are either connected in series configuration with the circuit carrying the current to be measured or have their shunt resistors connected in series in similar way. These ammeters are acknowledged for their smooth functioning, reliability and high efficiency. Moreover, these can be customised with various features like peak hold, retransmission output, MODBUS serial PC Interface. Other models available in catagory are: Ampere hour meters, Watt meters, Current Voltage loggers etc.

    ...more
    Get Best Price
  • HARRISONS MULTIMILL

    HARRISONS MULTIMILL

    Request for Price

    The Multimill is useful for various purposes like granulation, shredding, pulverization etc. The unit consists of vertically mounted 3 HP motor, which drives the shaft through. bearing housing. The rotor has 12 Nos. swinging type knife blades and 2 Nos. scrapper blades. All contact parts are made out of St. Steel – 304 quality. The machine is complete with motor, DOL starter with reversible switch and one no. stainless steel sieve.

    ...more
    Get Best Price
  • Dc Watt Meter IM1401

    Dc Watt Meter IM1401

    Request for Price

    These DC Watt Meter is a valuable tool for any modeler who flies electric powered models. It is cure to failures of motors, speed controllers, and batteries by providing the information to user needed to operate these items within a safe range. It will also allow safe experimentation with different batteries and propellers to maximize performance of that perticular model. We are manufacturers of efficient DC watt meter that are widely used to measure DC power across the load. This product is highly acknowledged and displays accurate reading. Available in various configurations it can further be customized as per the requirements given by the client. The output can be directly monitored to your existing PLC or SCADA systems

    ...more
    Get Best Price
  • Current Limit Ampere Hour Meter IM2512

    Current Limit Ampere Hour Meter IM2512

    Request for Price

    IM2512 is a 4 digit Ampere hour meter with a current limit relay. It has all the features of standard IM2501 C model, in addition a current set point. Typically, while in the charging process, when a battery is sufficiently charged, the current flow drops to a lower level. At this juncture, the battery must be disconnected from the source of power.

    ...more
    Get Best Price
  • Charge Discharge Ampere Hour Meter IM2507

    Charge Discharge Ampere Hour Meter IM2507

    Request for Price

    IM2507 is a charge discharge type Ampere Hour meter with two independent 4 digit displays for separate charge and discharge counting. One display counts the charge through the circuit, while other counts the discharge. Application areas are; battery life cycle testing, battery monitoring applications.

    ...more
    Get Best Price
  • Central Ampere Hour Controller IM2513

    Central Ampere Hour Controller IM2513

    Request for Price

    This model is suited for workstations where multiple jobs of electroplating are being carried out by using independent rectifiers in the same bath. Here IM2513 model acts as a master controller which is further connected to multiple IM2502C ampere hour meters and hence adds to the totaliser counts of such ampere hour meters. Further, depending upon the net count, it controls two doser relay outputs which eventually adds chemicals like additive and brightener to the bath.

    ...more
    Get Best Price
  • Battery Monittoring Ampere Hour Meter IM2505

    Battery Monittoring Ampere Hour Meter IM2505

    Request for Price

    IM2505 is a charge discharge type Ampere Hour Meter which is best suited for tracking monitoring battery AH in circuit. These are used in applications related to submarine and telecom or in sectors where battery back ups are used; since battery charge is to be monitored to switch on off charger. It helps load to avoid excessive charging as well as deep discharge. When battery is being charged, the AH count will increment. When batterystarts discharging, AH count will decrement. When AH reaches the lower set point, relay will operate. This can be used to either generate warning alarm or switch off discharge and or start charger. Relay will remain operated till battery is charged to its full level.

    ...more
    Get Best Price
  • Ampere Minute Second Meter IM2514

    Ampere Minute Second Meter IM2514

    Request for Price

    IM2514 is an advanced version of IM2501 ampere hour meter where user has thee modes to choose from ampere hour meter, ampere minute meter or as ampere second meter as per application necessity. It has one setpoint with a relay output to control external rectifier. All features of IM2501 are retained.

    ...more
    Get Best Price
  • Ampere Hour Profile Controller IM2508

    Ampere Hour Profile Controller IM2508

    Request for Price

    This ampere hour meter is designed to control rectifier during battery formation process. IM2508 ampere hour profile meter is a programmable step profile type device. In the process of the battery formation, the battery has to be charged at different ampere hour capacity in steps. To list some special features of IM2508 are short circuit monitoring, starting current control and bar forming timer.

    ...more
    Get Best Price
  • IM2510 Ampere Hour Meter

    IM2510 Ampere Hour Meter

    Request for Price

    IM2510 AH Meter with Timer is ampere Hour meter with the provision of Timer to Switch the relay ONOFF after pre-defined time (count) irrespective of battery charge levels. Typical application of this can be battery charging or discharging applications where battery might not charged or discharged to a specified level within a certain time period. The process has to be stopped after either predefined time is lapsed or charge level is reached.

    ...more
    Get Best Price
  • Three Doser Ampere Hour Meter

    Three Doser Ampere Hour Meter

    Request for Price

    IM2509 model ampere hour meter comes with three control relay outputs to facilitate addition of three chemicals. It is the modified virsion of the IM2503 model which offers two control relay outputs to control a addition of two chemicals. The other features of IM2502C model are retained in this model.

    ...more
    Get Best Price
  • Ampere Hour Meter Module TE2504

    Ampere Hour Meter Module TE2504

    Request for Price

    Ampere Hour Meter is specially designed for applications where the current requirements are relatively low. TE2504 is an integrated AH meter ready to use as a stand alone panel which is a step ahead of IM2501, IM2502 and IM2503 which are basically panel mount instruments which need to be fixed in the rectifier or an independent panel.

    ...more
    Get Best Price
  • Ampere Hour Logger IM2511

    Ampere Hour Logger IM2511

    Request for Price

    IM2511 is AH meter with Data Logging Facility. It can log DC Voltage, DC Current, AH count (charge) and or Watt Hour count (energy). Programmable voltage range and shunt value, adds to flexibility to work with any DC circuitry. Display of Voltage and current in single instrument allows user to do away with traditional meters and is cost effective. The reports are generated in text format by AH Meter which can be either printed on a serial printer or can be exported to PC and viewed in an editor or Microsoft Excel. Unit is useful for life cycle testing of batteries. It has end voltage setting as well as high and low charge level settings. User can also set independent time interval setting for charging and discharging.

    ...more
    Get Best Price
  • AH Meter With Doser Control IM2503

    AH Meter With Doser Control IM2503

    Request for Price

    IM2503C model is ideal for electroplating applications. Two doser relay outputs are provided which can automise the process of adding additive and brightener; basically chemicals to replenish the bath strength. Meter has two displays. One to show current flowing in the circuit and other two show the totaliser as well as present AH Count. Operation can be on Ampere hour or ampere minute calculations depending on application. Relay operation timings are programmable. User can either directly use these relays to operate solenoid valves or can be connected to Doser pump for more accurate addition of chemicals.

    ...more
    Get Best Price
  • 4 Digit Ampere Hour Meter

    4 Digit Ampere Hour Meter

    Request for Price

    Ajinkya’s 4 Digit Ampere Hour Meter with Totaliser provides a totaliser display along with ampere hour ampere minute count display. Most preffered for applications of Electroplating, where precise total charge decides the strength of the plating bath and addition of electrolyte, additive brightener in the bath to maintain the required strength of the electrolyte. In battery charging applications, totaliser will indicate the total charge drawn during charging process. It can also be used for discharging applications.

    ...more
    Get Best Price
  • Temperature Humidity Controller

    Temperature Humidity Controller

    Request for Price

    Get Best Price
  • Differential Temperature Controller

    Differential Temperature Controller

    Request for Price

    Get Best Price
  • Temperature Controller

    Temperature Controller

    Request for Price

    Get Best Price
  • Heat Cool PI Controller with Alarm

    Heat Cool PI Controller with Alarm

    Request for Price

    Get Best Price
  • 6 Digit RPM INDICATOR

    6 Digit RPM INDICATOR

    Request for Price

    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

Contact Information

Ajinkya Electronic Systems, Mumbai

  • Rajesh Doshi
  • No 131, Kakad Industrial Estate Off, L. J. Cross Road No. 3, Mahim, Mumbai, Maharashtra

Find Popular Ampere Hour Meters Dealers in Mumbai

top