angel bearing enterprises Ajmeri Gate, Delhi

  • Y-Bearings

    Y-Bearings

    Request for Price

    Y-bearings, which are usually refer to insert bearings, are based on sealed deep groove ball bearings in the 62 and 63 series, but have a convex outer ring and in most cases an extended inner ringwith a certain locking device enabling quick and easy mounting onto the shaft.Y-bearings are available singly or as units. Y-bearing units consist of a housing, bearing and seal that is preassembled and greased at the factory. These ready-to-mount units can accommodate moderate initial misalignment (Demo) but normally do not enable axial displacement of the shaft. Y-bearings and Y-bearing units offer a simple, cost-effective solution that can provide a number of benefits. For additional information about Y-bearing units, click on the link in the menu on the right of your screen.

    ...more
    Get Best Price
  • Toroidal Roller Bearing

    Toroidal Roller Bearing

    Request for Price

    CARB toroidal roller bearings combine the self-aligning capability of spherical roller bearings with the axial displacement ability of cylindrical roller bearings. CARB bearings can also have the compact cross section and high load carrying capacity normally associated with needle roller bearings. CARB bearings are intended exclusively as non-locating bearings. They can simplify the bearing arrangement design for shafts that are subjected to thermal expansioncontraction because axial displacement is accommodated within the bearing, virtually without friction. Bearing systems consisting of a spherical roller bearing in the locating position and a CARB bearing in the non-locating position provide a space and weight-saving bearing system with a low cost of ownership. CARB bearings can reduce noise and vibration levels, e.g. in paper machines and fans. CARB bearings are single row bearings with long, slightly barrel-shaped symmetrical rollers.

    ...more
    Get Best Price
  • Thrust Spherical Plain Bearings

    Thrust Spherical Plain Bearings

    Request for Price

    Thrust spherical plain bearings resemble angular contact spherical plain bearings in that they have sliding contact surfaces in the shaft and housing washers which are arranged at an angle to the bearing axis. However, they are primarily intended for axial loads although they can accommodate combined loads to a certain extent. The radial load component should, however, not exceed 50% of the simultaneously acting axial load. SKF thrust spherical plain bearings are produced as standard with the sliding contact surface combination steel/FRP and are maintenance-free. To enhance protection against corrosion as well as sealing it is, however, in many applications, advisable to fill the space surrounding the bearing during mounting with a rust inhibiting lithium base grease of consistency 2 or 3. Such an initial lubrication will also extend the service life of the bearing.

    ...more
    Get Best Price
  • support rollers

    support rollers

    Request for Price

      SKF support rollers have an internal design very similar to that of a needle or cylindrical roller bearing. They are characterized by a thick-walled outer ring that enables them to accommodate shock loads while reducing distortion and bending stresses. The outer ring running surface is crowned as standard. However, support rollers with a cylindrical (flat) running surface are available for certain applications. These pre-greased, ready-to-mount units are suitable for all types of cam drives, tracks and conveyor systems.

    ...more
    Get Best Price
  • Spherical Roller Bearings

    Spherical Roller Bearings

    Request for Price

    Spherical roller bearings have two rows of rollers, a common sphered outer ring raceway and two inner ring raceways inclined at an angle to the bearing axis. The centre point of the sphere in the outer ring raceway is at the bearing axis. Therefore, the bearings are self-aligning and insensitive to misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection. Spherical roller bearings are designed to accommodate heavy radial loads, as well as heavy axial loads in both directions.

    ...more
    Get Best Price
  • spherical plain thrust bearings

    spherical plain thrust bearings

    Request for Price

    Spherical Roller Bearings : Spherical roller bearings have two rows of rollers, a common sphered outer ring raceway and two inner ring raceways inclined at an angle to the bearing axis. The centre point of the sphere in the outer ring raceway is at the bearing axis. Therefore, the bearings are self-aligning and insensitive to misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection. Spherical roller bearings are designed to accommodate heavy radial loads, as well as heavy axial loads in both directions.

    ...more
    Get Best Price
  • Self-aligning Ball Bearings

    Self-aligning Ball Bearings

    Request for Price

      The self-aligning ball bearing was invented by SKF. It has two rows of balls and a common sphered raceway in the outer ring. The bearings are consequently self-aligning and insensitive to shaft deflections and angular misalignment of the shaft relative to the housing. Additionally, self-aligning ball bearings generate less friction than any other type of rolling bearing, which enables them to run cooler even at high speeds. Self-aligning ball bearings are available with either a cylindrical or tapered bore. Bearings with a tapered bore can be mounted directly on a shaft or on an adapter or withdrawal sleeve.

    ...more
    Get Best Price
  • Radial Needle Roller Bearings

    Radial Needle Roller Bearings

    Request for Price

    Needle roller bearings are roller bearings with cylindrical rollers that are small in diameter. In spite of their low cross section, needle roller bearings have a high load carrying capacity and are therefore extremely suitable for bearing arrangements where radial space is limited. SKF supplies needle roller bearings in different designs and a wide range of sizes, which are appropriate for different applications.

    ...more
    Get Best Price
  • Needle Roller Bearings

    Needle Roller Bearings

    Request for Price

    Needle roller bearings are roller bearings with cylindrical rollers that are small in diameter. In spite of their low cross section, needle roller bearings have a high load carrying capacity and are therefore extremely suitable for bearing arrangements where radial space is limited. SKF supplies needle roller bearings in different designs and a wide range of sizes, which are appropriate for different applications.

    ...more
    Get Best Price
  • Deep Groove Ball Bearings

    Deep Groove Ball Bearings

    Request for Price

    Deep groove ball bearings have deep, uninterrupted raceway grooves. These raceway grooves have a close osculation with the balls, enabling the bearings to accomodate radial and axial loads in both directions. These bearings are particularly versatile and are:simple in designnon separablesuitable for high and even very high speedsrobust in operation, requiring little maintenanceDeep groove ball bearings are the most widely used bearing type. Consequently, they are available from SKF in many designs, variants, series and sizes.

    ...more
    Get Best Price
  • carb toroidal roller bearings

    carb toroidal roller bearings

    Request for Price

      CARB toroidal roller bearings combine the self-aligning capability of spherical roller bearings with the axial displacement ability of cylindrical roller bearings. CARB bearings can also have the compact cross section and high load carrying capacity normally associated with needle roller bearings. CARB bearings are intended exclusively as non-locating bearings. They can simplify the bearing arrangement design for shafts that are subjected to thermal expansion/contraction because axial displacement is accommodated within the bearing, virtually without friction. Bearing systems consisting of a spherical roller bearing in the locating position and a CARB bearing in the non-locating position provide a space and weight-saving bearing system with a low cost of ownership. CARB bearings can reduce noise and vibration levels, e.g. in paper machines and fans. CARB bearings are single row bearings with long, slightly barrel-shaped symmetrical rollers.

    ...more
    Get Best Price
  • Cam Follower Pin

    Cam Follower Pin

    Request for Price

    SKF cam followers have an internal design very similar to that of a needle or cylindrical roller bearing. They are characterized by a thick-walled outer ring that enables them to accommodate shock loads while reducing distortion and bending stresses. The outer ring running surface is crowned as standard. However, cam followers with cylindrical (flat) running surfaces are available for certain applications. Instead of an inner ring, cam followers have a solid stud (pin) that is threaded so that the cam follower can be quickly and easily attached to appropriate machine components by means of a hexagonal nut.

    ...more
    Get Best Price
  • Axial Needle Roller Bearing

    Axial Needle Roller Bearing

    Request for Price

    Cylindrical Roller Bearings : Bearings with a cage can accommodate heavy radial loads, fast accelerations and high speeds. Full complement bearings incorporate a maximum number of rollers and are therefore suitable for very heavy radial loads at moderate speeds. Cylindrical roller bearings combine the high load carrying capacity of a full complement bearing with the high speed capability of a bearing with a cage. SKF cylindrical roller bearings have two integral flanges on either the inner or outer ring to guide the rollers. The bearings have “open” flanges, i.e. the inward face of the flange is inclined by a defined angle. The flange design, together with the roller end design and surface finish, promote the formation of a lubricant film to reduce friction and frictional heat.

    ...more
    Get Best Price
  • Angular Contact Thrust Ball Bearings

    Angular Contact Thrust Ball Bearings

    Request for Price

    angular contact thrust ball bearings shown here were originally designed to support the rotary tables of drilling rigs but are also suitable for other applications where high load carrying capacity, high axial stiffness and low friction torque are important. In contrast to conventional thrust ball bearings, angular contact thrust ball bearings can accommodate radial loads in addition to axial loads and are able to operate at high speeds.SKF angular contact thrust ball bearings are produced in a wide variety of designs and sizes.

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

Contact Information

Angel Bearing Enterprises

  • Pawan
  • 5273,1st Floor, G B Road, Delhi - 110006, Opposite Dena Bank, Ajmeri Gate
top