Arban Industries Roorkee, Uttarakhand

  • Thermodynamics Lab

    Thermodynamics Lab

    Request for Price

    The devices we make available for setting up a Thermodynamics Lab include Single Stage Reciprocating Air Compressor, Centrifugal Air Blower Test Rig, Roots Blower Test Rig, etc. We manufacture the equipment at our in-house manufacturing unit under the guidance of experienced engineers. Buyers can obtain the equipment at affordable rates from us.   Details : Single Stage Reciprocating Air Compressor Centrifugal Air Blower Test Rig. Roots Blower Test Rig. Centrifugal Compressor Test Rig Separating & Throttling Calorimeter Two Stage Reciprocating Air Compressor Steam Turbine Test Rig. Axial Flow Fan Test Rig. Rotary Compressor Test Rig Bolier Model : Model of Lancashire Boiler Model of Cornish Boiler Model of Babcock and Wilcox Boiler Model of Locomotive Boiler Model of Cochran Boiler Vertical Water Tube Boiler Model of Lamont Boiler Model of Benson Boiler Model of Valox Boiler Model of Marcet Boiler   Steam Engine Models : Model of Steam Engine, Model of Compound Steam Engine, Model of Uniflow Steam Engine, Model of Drop Valve Steam Engine Model of Mayer Expansion Valve Steam Engine Model of Corliss Valve Steam Engine   Mountings & Accessories Of Steam Boilers : Safety Valve Lever, Spring Loaded Safety Valve, Deed Weight Safety Valve Combined High Steam Valve, Water Gauge Model, Steam Injector, Blow Off Cock Pressure Gauge, Reducing Valve, Fusible Plugs , Anti-Priming Pipe, Expansion Steam Trap,Float Steam Trap,Green Economizer,Sudgen Super Heater

    ...more
    Get Best Price
  • Thermal Engineering Lab / I.C. Engine Lab

    Thermal Engineering Lab / I.C. Engine Lab

    Request for Price

    Our company is engaged in designing and developing excellent quality equipment for Thermal Engineering Lab / I.C. Engine Lab. The devices offered by us include Petrol Engine Test Rig and Diesel Engine Test Rig. Owing to our brilliant logistics network, we are capable of delivering bulk orders of the equipment.   Petrol Engine Test Rig : Single Cylinder Two Stroke Petrol Engine Test Rig with Rope Brake Dynamometer Single Cylinder Four Stroke Petrol Engine Test Rig with Rope Brake Dynamometer Three Cylinder Four Stroke Petrol Engine Test Rig with Rope Brake Dynamometer Four Cylinder Four Stroke Petrol Engine Test Rig with Rope Brake Dynamometer Diesel Engine Test Rig : Single Cylinder Four Stroke Diesel Engine Test Rig with Rope Brake Dynamometer Twin Cylinder Four Stroke Diesel Engine Test Rig with Rope Brake Dynamometer Four Cylinder Four Stroke Diesel Engine Test Rig with Rope Brake Dynamometer

    ...more
    Get Best Price
  • Theory of Machine Lab

    Theory of Machine Lab

    Request for Price

    The company is capable of designing and developing a wide array of equipment for Theory of Machine Lab. Our assortment of devices includes Motorized Gyroscope Apparatus, Static & Dynamic Balancing Apparatus, Cam Analysis Apparatus, Slip & Creep In A Flat Belt Apparatus, Journal Bearing Apparatus, etc. Buyers can obtain the equipment at competitive rates from us.   Details : Motorized Gyroscope Apparatus Static & Dynamic Balancing Apparatus Cam Analysis Apparatus Slip & Creep In A Flat Belt Apparatus Journal Bearing Apparatus Epicyclic Gear Train And Holding Torque Apparatus Drilling Tool Dynamometer Apparatus Grinding Tool Dynamometer Apparatus Universal Governor Apparatus Whirling of Shaft Apparatus Coriollis Component of Acceleration Apparatus Vibration Table’s Apparatus Michel Tilting Pad Bearing Apparatus Lathe Tool Dynamometer Apparatus Milling Tool Dynamometer Apparatus  Gear Models : Single Stage Spur Gears,Two Stage Spur Gears , Single Stage Helical Gears, Gears,Internal Gear Pinion Drive,Rack and Quadrant Gears, Epicycle Gear, Reversing Gear, Worm Gear,Train of Gear Wheels Simple,Train of Gear Wheels Compound, Differential Gear Mechanism Models : Slide Crank Mechanism (A) Reciprocating Engine Mechanism (B) Oscillating Cylinder Mechanism (C) with worth Quick Return Mechanism Four Bar Link Mechanism, Scotch Yoke Mechanism, Ellipe Tracer Model, Watt's Mechanism Peculiar Linkage Drive Model, Pantograph Mechanism, Kinematic Pairs,Crank Shaft to Slider Mechanism, Crank & Slotted Link Mechanism,Slotted Link Bar Mechanism,Inversion of Four Bar Mechanism,Crank Drive to Oscillating Link Mechanism, Inversion of Single Slide Crank Mechanism,Inversion of Double Slide Crank Mechanism CAM & Follower Models : Plate Cam, Tangent Cam, Cylindrical Cam, Translating Cam, End Cam Reciprocating Follower, Roller Oscillating Follower,Translating Follower,Knife Edge Follower Belt Pulley Models : Flat Belt Pulley, Rope Pulley, V' Belt Pulley Bearing Models :  Ball Bearings, Roller Bearings,Taper Bearings,Thrust Bearings Joints Models : Cotter Joint,Gib & Cotter Joint,Tie Rod Joint,Sleeve & Cotter Joint,Socket & Spigot Joint Riveted Joints (A) Riveted Joints Triple (B) Riveted Joints Quadruple (C) Riveted Joints Coupling Models : Sellers Coupling,Universal Coupling,Hook's Coupling,Double Hook's Coupling,Flexible Coupling Box of Muff Coupling,Flanged Coupling,Split Muff Coupling,Oldham's Coupling Clutch Models :  Claw Clutch,Conical Friction Clutch,Plate Clutch,Centrifugal Clutch,Multiplate Clutch Gyroscope Models : Watt's Governors,Loaded Governors,Porter Governors,Hartnell Governors

    ...more
    Get Best Price
  • Structural Analysis Lab

    Structural Analysis Lab

    Request for Price

    Owing to our excellent infrastructural facilities, we have been successfully designing and developing quality approved array of equipment for Structural Analysis Lab.  We make available different devices required in a Structural Analysis Lab such as Apparatus For Verifications OF Clerk's Maxwell Reciprocal Theorem, Three Hinged Arch Apparatus, .Shear Centre Apparatus, etc.   Apparatus For Verifications OF Clerk's Maxwell Reciprocal Theorem : Elastic Properties of Deflected Beam Apparatus Shear Centre Apparatus. Three Hinged Arch Apparatus Behavior of Column and Struts Apparatus Both Ends Pinned Both Ends Fixed One End Pinned And Other Fixed One End Fixed And Other End Free Unsymmetrical Bending Apparatus Pin Joint Truss Apparatus Deflection of Curved Member Apparatus Two Hinged Arch Apparatus Bending Moment of Shear Force Apparatus Portal Frame Apparatus Redundant Joint Apparatus Elastic Coupled Beam Apparatus Beam Model (Simple Supported Beam) Suspension Bridge Apparatus

    ...more
    Get Best Price
  • Stefan Boltzmann Apparatus

    Stefan Boltzmann Apparatus

    Request for Price

    Backed by our team of dexterous professionals, we have emerged as a successful Manufacturer and Supplier of Stefan Boltzmann Apparatus. The Stefan Boltzmann Apparatus offered by us is manufactured using quality-tested components and the latest technology. Courtesy our brilliant logistics network, we are capable of delivering bulk orders of the Apparatus within the promised timeframe. One can obtain the Apparatus at nominal rates from us.

    ...more
    Get Best Price
  • Reynold Apparatus

    Reynold Apparatus

    Request for Price

    We are a nonpareil Manufacturer and Supplier of Reynold Apparatus. The Reynold Apparatus offered by us is used to visualize different flow conditions i.e. laminar flow, transition flow, turbulent flow, etc. Our Apparatus is also used to find out the Reynolds number. The complete range of the Apparatus is reasonably priced by us.   Details : The apparatus is used to visualize different flow conditions i.e. Laminar flow, transition flow, turbulent flow, To find out the reynolds number the apparatus consists of : A centrifugal pump of 25mm x 25mm with 14 hp motor (isi make) M.S sump tank 80 ltr. To collect the water. M.S measuring tank 40 ltr fitted with piezometer tube to measure the discharge. Damper is used to collect the water in m.s. Measuring tank for certain time. G.I pipe of internal dia 25.4mm (1") and g.m. Isi mark control value and regulating valves are used to circulate water. Bye-Pass line is also used to regulate the discharge. This apparatus consists of a perspex tube of internal dia 25mm dia x 100cm long. A needle and color dye injector tank is used to visualize the flow. The tanks are well epoxy painted insided to prevent rust hence increase the life of tank.   Experimental capability : To visualize different flow conditions. To obtain the critical velocity

    ...more
    Get Best Price
  • Refrigeration Test Rig

    Refrigeration Test Rig

    Request for Price

    Owing to our rich industry experience, we have emerged as a successful Manufacturers and Suppliers of Refrigeration Test Rigs.  The Refrigeration Test Rigs offered by us are manufactured in compliance with set industrial norms. In order to cater the bulk and urgent requirements of the buyers, we maintain a large stock of the Test Rigs in our state-of-the-art warehouse. The complete range of the Test Rigs is reasonably priced by us.

    ...more
    Get Best Price
  • Refrigeration & Air Conditioning Lab

    Refrigeration & Air Conditioning Lab

    Request for Price

    We are involved in making available quality approved range of equipment for Refrigeration & Air Conditioning Lab. The equipment we make available is known for its high accuracy, immaculate quality and long functional life. We hold the expertise of delivering bulk orders of the equipment within the promised timeframe.    Details Refrigeration Test Rig  Air Conditioning Test Rig (Duck Type)  Water Cooler Test Rig (Capacity 20 Lit/Hr)  Vapor Absorption Test Rig Cold Storage Test Rig  Air Conditioning Test Rig (Window Type)  Mechanical Heat Pump Test Rig  Ice Plant Test Rig Capacity 30 Kg/ Day  Water Chilling Plant Test Rig  Water Cooling Tower Test Rig  Different Types of Expansion Devices Different Types of Evaporators Electrolux Refrigeration unit/ Domestic Refrigeration RAC Lab Models : Cut Section Model of Refrigerator Cut Section Model Hermetically Sealed  Compressor Cut Section Model Condenser Fan Motor  Cut Section Model of Solenoid Control Valve Cut Section Model of Air Conditioner  Cut Section Model Open Type Reciprocating Compressor Cut Section Model of Automatic Expansion Valve  Cut Section Model of Automatic Expansion Valve  Cut Section Model of Automatic Expansion Valve Cut Section Model of Solenoid Control Valve. Cut Section Model of Solenoid Control Valve Cut Section Model of Thermostatic Expansion Valve.  Model of Plate Type Condenser Model of Shell And Tube Condenser Model of Capillary Tube Expansion. Cut Section Model of Automatic Expansion Valve. Cut Section Model of Air Conditioner. Model of Evaporative Condenser. Model of Plate Type Condenser

    ...more
    Get Best Price
  • Reciprocating Pump Test Rig

    Reciprocating Pump Test Rig

    Request for Price

    Get in touch with us for excellent quality Reciprocating Pump Test Rigs! We are an eminent Manufacturer and Supplier of Reciprocating Pump Test Rigs. The Reciprocating Pump Test Rig offered by us undergoes strict quality-tests before the final dispatch. Buyers are free to place bulk orders of the Test Rigs with us and we ensure their timely execution.   Details : Pump : Double acting reciprocating pump of size 25 x 20mm with air vessel to discharge about 20lpm at 20 meters total head. (make: suguna). Moto : 1hp, 1400rpm, single phase, 200220v, ac supply. Speed Variation : Stepped pulley reduction belt drive to run the pump at 3 different speeds. Electrical panel : Switch and energy meter for the measurement of power input. Sump tank : M.S. Powder coatingm.s. Frp linings.s unit of suitable size to store sufficient water for independent circulation through the unit. Measuring tank : M.S. Powder coatingm.s.frp linings.s unit suitable size capacity provided with standard fittings for measuring discharge of water. Others : Piping system consisting of pipes, pressure relief valve, gate valve and fitting with pressure gauge.

    ...more
    Get Best Price
  • Pitot Tube Apparatus

    Pitot Tube Apparatus

    Request for Price

    We offer pitot tube apparatus. His apparatus is used to measure the velocity of fluid in the pipe. This apparatus is also used to measure the coefficient of pitot tube. The apparatus consists of:  a centrifugal pump of 25mm x 25mm with 12 hp motor (isi make)  m.s. Sump tank 80 ltr. To collect the water.  m.s. Measuring tank 40 ltr fitted with piezometer tube to measure the discharge. Damper is used to collect the water in m.s. Measuring tank for certain time.  g.i. Pipe of internal dia 25.4mm (1") and gunmetal isi mark control valve and regulating valve are used to circulate water.  bye-pass line is also used to regulate the discharge. This apparatus consists of steel pitot tube (bend through 90°) fitted (1") pipe. Pressure tapings are provided on pitot tube and pipe. The pressure tapping are connected to the inclined u tube mercury manometer to measure pressure difference. The tanks are well epoxy painted insided to prevent rust hebce increase the life of tank.

    ...more
    Get Best Price
  • Pipe Friction Apparatus

    Pipe Friction Apparatus

    Request for Price

    We offer pipe friction apparatus. This apparatus is used to measure darcy's friction coefficient (f) forgiven pipes. The apparatus consists of:  a centrifugal pump of 25mm x 25mm with 12 hp motor (isi make)  m.s. Sump tank 80 ltr. To collect the warer.  m.s. Measuring tank 40 ltr fitted with piezometer tube o measure the discharge. Damper is used to collect the water in m.s mesuring tank for certain time.  g.i. Pipe of internal dia 25.4mm (1") and gunmetal isi mark control valve and regulating valves are used to circulate water.  bye-pass line is also used to regulate the discharge. this apparatus consists of a three g.i. Pipe 12", 34". The pressure tapings are provided 100cm a part on each pipe. Each tapings are connected to the mercury u tube manometer to measure head difference. Hand shuts valves are provided on each pipe to open supply in the pipe. the tanks are well epoxy painted insided to prevent rust hence increase the life of tank. experimental capabilities:  to determine the loss coefficient for different type of fittings.  comparison of pressure across two different types.

    ...more
    Get Best Price
  • Pelton Wheel Turbine Test Rig

    Pelton Wheel Turbine Test Rig

    Request for Price

    We are bracketed among the distinguished Manufacturers and Suppliers of Pelton Wheel Turbine Test Rigs. Our unit shows the construction and working of Pelton Wheel Turbine. It consists of Pelton wheel rotate by the jet of water supplied from centrifugal pump. Rope break dynamometer is used to measure the output of turbine. Pressure Gauge and Orificemeter are used to measure the input of turbine   Specifications : This Pelton Turbine Test Rig 65mm size to develop 2 HP at 1000 RPM with a flow of about 450 Ipm at 30 meters supply head-Supply pump set suitable for supplying water to the above turbine Monobiock Centrifuge) l\imp  -  (5 HP, 3 Phases, 440V) Pump Size  -  Suction size 50mm & Delivery size 40mm Pump Discharg  -  420 LPM Delivery Head  -  27 meter RPM  -  3000 RPM Sump Tank : MS Tank to store sufficient water for independent circulation through the unit experimentation and arrange within the floor space of main unit. Capacity 650 Ltr. Runner coupled to pelton wheel. Rope Bake Dynamometer is used to measure the output Runner diameter 220mm. Spring Balance 6 kg (Salter Make). Discharge Butter Fly valve used to control the flow-rate of water. Pressure Gauge of 4.2 kg/crn2 is used to measure the pressure head. Rigid MS frame work compactly fitted with all the above items as a self-sufficient package unit suitable for operation without any foundation Switch and starter suitable for above motor pump set mounted on the control panel board Experimental Capabilities : To determine the efficiency of Turbine To draw the characteristics curve of Turbine

    ...more
    Get Best Price
  • Pelton Wheel Turbine Test

    Pelton Wheel Turbine Test

    Request for Price

    We are offering pelton wheel turbine test.

    Get Best Price
  • Notch Apparatus

    Notch Apparatus

    Request for Price

    We are offering notch apparatus.

    Get Best Price
  • Metaceentric Height Apparatus

    Metaceentric Height Apparatus

    Request for Price

    We offer metaceentric height apparatus. This apparatus is used to determine he metacentric height of a ship model under load and unload condition, (flat bottomed vessel). This apparatus consists of :  a flat bottomed semi-circular shio model of size 380 x 250 x 170mm.  a tank of size 60x60x30cm fitted with piezometer tube to measure the level of water. Transparent sheet is provided on the front of tank.  a pointer to measure the angle of heel upto +-15°.  a cross bar arrangement with the provision of angling movable weights at known distance fron the vertical axis through c.g.  additional five hanging weights (50 gm. Each) are provided. The tanks are well epoxy painted insided to prevent rust hence increase the life of tank. Experimental capabilities: determination of metacentric height for a flat bottomed vessel under loaded and unloaded conditions.

    ...more
    Get Best Price
  • Kaplan Turbine Test Rig

    Kaplan Turbine Test Rig

    Request for Price

    We offer Kaplan Turbine Test Rig. This is a reaction turbine and this test rig shows the construction and working of Francis turbine. Rope brake dynamometer is used to measure the output of turbine. Pressure gauge and orifice meter are used to measure the input of turbine. Specifications: This Francis Turbine Test Rig 150mm size to develop 2 HP at 1250 RPM with a flow o( about 1400 Ipm at 15 meters supply head Supply pump set lOO x lOOmm size, 1500 Ipm at 15 meter head suitable for supplying water to the above turbine. Monoblock Centrifugal Pump : (5 HP, 3 Phases, 440V) Pump Size : Suction size 100mm & Delivery size 100mm Pump Discharge : 2500 LPM Delivery Head : 7 meter RPM : 3000RPM Sump Tank : Fiber glass lined MS Tank to store sufficient water for independent circulation through the unit experimentation and arrange within the floor space of main unit. Capacity 950 ltr. Rope Bake Dynamometer is used to measure the output. Spring balance and dead weights are used to measure the load Runner suitable Diameter & orifice meter is used to measure the flow rate of water. Discharge control valve, by-pass valve of 4' (ISI mark) used to control the flow rate of water. Spring Balance arrangement. Pressure Gauge of 10 kgcm2 is used to measure the pressure head. Rigid MS frame work compactly fitted with all the above items as a self-sufficient Package unit suitable for operation without any foundation. Switch and starter suitable for above motor pump set mounted on the control panel board. Experimental Capabilities: To determine the efficiency of Turbine To draw the characteristics curve of Turbine.

    Brand Name : Arban Industries

    ...more
    Get Best Price
  • Impact Jet Apparatus

    Impact Jet Apparatus

    Request for Price

    Our company is an established Manufacturer and Supplier of Impact Jet Apparatus. The Impact Jet Apparatus offered by us is used to verify the momentum equation experimentally. This is also used for comparison of change in force exerted due to shape of the vane for different targets (flat or curved) The apparatus consists of : A Centrifugal pump of 25mm x 215mm with 1/2 HP Motor (ISI Make) M.S. Sump Tank 80 Ltr. to collect the water. M.S. Measuring Tank 40 Ltr fitted with piezometer tube to measure the discharge. Damper is used to collect the water in M.S. MEASURING TANK for certain time. G.I. pipe of internal dia 25.4mm (1") and Gunmetal ISI mark Control Valve and regulating valve are us This apparatus is used to verify the momentum Equation experimentally. This is also used for comparison of change in force exerted due to shape of the vane for different targets (Flat or curved). Bye-pass line is also used to regulate the discharge. This apparatus consists of a Perspex cylinder of 6" (152mm) dia with two interchangeable targets (curved and plane). A nozzle of 10mm is fitted to produce jet. A scale is provided on the top to measure the displacement of plate. Five additional weights of 100 gm. Each are also provided. The tanks are well epoxy painted insided to prevent rust hebce increase the life of tank. Experimental capabilities : To determine the momentum equation experimentally. Comparison of change in force exerted due to shape of the vane for different targets (flat or curved).ed to circulate water.

    ...more
    Get Best Price
  • Hydraulics Machine Lab

    Hydraulics Machine Lab

    Request for Price

    Known for their accuracy and reliability, our Hydraulics Machine Lab equipment is designed to meet the requirements of various educational and research institutions. We offer a wide array of devices and equipment required for setting up an excellent Hydraulics Machine Lab.  Bulk orders of the devices are processed by us as per the specific requirements of the buyers.   Hydraulics Machine Lab : Pelton Wheel Turbine Test Rig (Capacity : 1 Kw) Francis Turbine Test Rig (Capacity : 1 Kw) Kaplan Turbine Test Rig (Capacity : 1 Kw) Steam Turbine Test Rig Centrifugal Pump Test Rig (Three Speed Cone Pulley) Gear Pump Test Rig Submersible Pump Test Rig Hydraulic Ram (Closed Circuit) Hydraulic Tilting Flume / Open Channel - 4 Meter Hydraulic Tilting Flume / Open Channel - 6 Meter Hydraulic Tilting Flume / Open Channel - 10 Meter Experiment Pneumatic Apparatus Hydraulic Tilting Flume / Open Channel - 10 Meter Experiment Hydraulic Apparatus Pelton Wheel Turbine Test Rig (Capacity : 3.7 Kw) Francis Turbine Test Rig (Capacity : 3.7 Kw) Kaplan Turbine Test Rig (Capacity : 3.7 Kw) Centrifugal Pump Test Rig (Constant Speed) Reciprocating Single Stage Pump Test Rig Jet Pump Test Rig Cavitations Test Rig Hydraulic Tilting Flume / Open Channel - 8 Fits Hydraulic Tilting Flume / Open Channel - 5 Meter Hydraulic Tilting Flume / Open Channel - 8 Meter Wind Tunnel Experiment Pneumatic Apparatus Wind Tunnel Hydraulic Ram Model  Turbine & Pumps Models : Centrifugal Pump. Gear Pump Deep Well Turbine Pump Francis Turbine Model Kaplan Turbine Model Steam Turbine Model Reciprocating Pump. Jet Pump. Submersible Pump Pelton Turbine Model De-level Turbine Model Hydraulic Ram Model

    ...more
    Get Best Price
  • Hydraulic Ram Test Rig

    Hydraulic Ram Test Rig

    Request for Price

    We offer hydraulic ram test rig. Hydraulic ram: hydraulic ram of size 50 x 15m to work against a delivery head up to 20m from a supply head of 2.5metres to discharge about 250lph at 10m head. Supply tank: m.s powder coatingm.s frp linings.s unit tank of suitable size with over flow arrangement for supply of water at constant head of 2.5 meters. Supply & delivery pipings: supply pipe of size 50mm & 6 meter length connecting supply tank & hydraulic ram and delivery pipe of ½ ” size to deliver useful water from hydraulic ram to measuring tank. Measuring tank: m.s powder coatingm.s. Frp lining s.s unit of suitable size provided with standard fittings for measuring of useful water. Notch tank: m.s. Unit with frp linings.s unit with a brass notch plate and hook gauge for measurement of waste water. Sump tank: m.s. Unit with frp linings.s unit of suitable size for independent circulation of water through the unit. Supply pump set: 0.5hp, single phase to supply water from the sump to the supply tank.

    ...more
    Get Best Price
  • Heat & Mass Transfer Lab

    Heat & Mass Transfer Lab

    Request for Price

    We are engaged in offering quality-tested devices and equipment for Heat & Mass Transfer Lab. The equipment offered by us undergoes strict quality-tests based on different parameters before the final dispatch. Owing to our well-established infrastructure facilities, we are capable of meeting the varied requirements of the buyers and educational institutions.   Heat transfer lab : Thermal Conductivity of Metal Rod Apparatus Thermal Conductivity of Liquid Apparatus Stefan Boltzmann Apparatus Pin Fin In Natural/Forced Convection Apparatus Forced Convection From Horizontal Cylinder Apparatus Parallel Flow/Counter Flow Heat Exchanger Apparatus Counter Flow Heat Exchanger Apparatus Composite Wall Apparatus Lagged Pipe Apparatus Critical Heat Flux Apparatus Shell and Tube Heat Exchanger Apparatus Study of Drop-Wise And Film-Wise Apparatus Unsteady State of Heat Transfer Apparatus Finned Tube Heat Exchanger Apparatus Forced Drought Cooling Tower Apparatus Thermal Conductivity of Insulation Powder Apparatus Thermal Conduction of Liquid by Guarded Hot Plate Method Apparatus Natural Convection From Vertical Cylinder Apparatus Emissivity Measurement Apparatus Specific Heat of Air Apparatus Parallel Flow Heat Exchanger Apparatus Unsteady State of Heat Transfer Apparatus Heat Pipe Demonstrator Apparatus Composite Cylinder Apparatus Heat Conduction Apparatus Pool Boiling Apparatus Two Phase Heat Transfer Apparatus Finned Tube Heat Exchanger Apparatus Plate Type Heat Exchanger Apparatus U Tube Finned Heat Exchanger Apparatus Vortex tube Apparatus

    ...more
    Get Best Price
  • GLOW PLUGS

    GLOW PLUGS

    Request for Price

    Set Set(s) (MOQ)

    Glow plugs and the injection nozzle are installed in the pre combustion chamber of the cylinder head. The glow plug (heater plug) is turned on when you turn on the ignition switch. On some equipment a light on the dashboard signals that the glow plug is cycling which signals you to wait between 3 to 5 seconds before cranking the engine. The heat, created by electrical resistance in the glow plug, heats the fuel and air mixture, thus it is also known as a "Heater Plug". The heat generated by the glow plug and the heat generated by compression allow the fuel to ignite. All glow plugs have the same purpose. The difference is quality! There are single coil and dual coil plugs. Single coil plugs will burn out if constant power is applied, while dual coil plugs will regulate their temperature and not burn out. dual coil regulates the plug's temperature to avoid catastrophic failures

    ...more
    Get Best Price
  • Gear Oil Pump Test Rig

    Gear Oil Pump Test Rig

    Request for Price

    We offer gear oil pump test rig. Pump: a gear oil pump of size 25mm to discharge about 30lpm 2 against a maximum working pressure of 2kgcm moto : 1hp, 1400rpm, single phase, 200220v, ac supply. Electrical panel: switch and energy meter for the measurement of power input sump tank: m.s. Powder coatingm.s. Frp linings.s unit of suitable size store sufficient water for independent circulation through the unit. Measuring tank: m.s. Powder coatingm.s.frp linings.s unit suitable size provided with standard fittings for measuring discharge of water. Others: piping system consisting of pipes, pressure relief valve, gate valve and fitting with pressure gauge. Service required: oilhigh speed diesel of about 60lts.

    ...more
    Get Best Price
  • Francis Turbine Test Rig

    Francis Turbine Test Rig

    Request for Price

    The company is a prominent Manufacturer and Supplier of Francis Turbine Test Rigs. This is a reaction turbine and this Test Rig shows the construction and working of Francis turbine. Rope brake dynamometer is used to measure the output of turbine. Pressure gauge and orifice meter are used to measure the input of turbine.   Specifications : This Francis Turbine Test Rig I00mm size to develop 2 HP at 1250 RPM with a flow of about 1400 Ipm at 15 meters supply head. Supply pump set lOOxlOOmm size, 1500 Ipm at 15 meter head suitable for supplying water to the above turbine. Monoblock Centrifugal Pump  -  (5 HP, 3 Phases, 440V) Pump Size  -  Suction size 80mm & Delivery size 80mm Pump Discharge  -  1500 LPM Delivery Head ; 15 meter RPM  -  3000 RPM   Sump Tank : MS Tank to store sufficient water for independent circulation through the unit experimentation and arrange Within the floor space of main unit. Capacity 650 Itr. Rope Bake Dynamometer is used to measure the output. Spring balance and dead weights are used to measure the load. Runner Diameter 220mm. Discharge Butter Fly valve used to control the flow rate of water. Spring Balance 6 Kg (Salter Make) Pressure Gauge of 4.2 kg/cm2 is used to measure the pressure head. Rigid MS frame work compactly fitted with all the above items as a self-sufficient package unit suitable for operation without any foundation. Switch and starter suitable for above motor pump set mounted on the control panel board. Experimental Capabilities : To determine the efficiency of Turbine To draw the characteristics curve of Turbine

    ...more
    Get Best Price
  • Fluid Mechanics Lab

    Fluid Mechanics Lab

    Request for Price

    We are second to none in designing and developing a wide variety of Fluid Mechanics Lab equipment.  We provide equipment for Fluid Mechanics Lab, which are manufactured in compliance with set industrial norms. Our team comprises of well-qualified and experienced engineers, who provide efficient and prompt after-sales-service to our buyers.   Products : Flow Measurement by Venturimeters Apparatus Flow Measurement by Orifice Meter Apparatus Flow Measurement by Nozzle Meter Apparatus Flow Measurement by Rotameter Apparatus Flow Measurement by Bend Apparatus Flow Measurement by Pressure Gauge Apparatus Minor Losses in Pipes and Pipe Fitting Apparatus Pipe Friction Apparatus Stokes Law Apparatus Pitot Tube Apparatus Hydraulic Test Bench Determination of Cd, Cc & Cv Orifice & Mouthpiece Apparatus    Triangular and Rectangular Notch Apparatus Flow Through Packed Bed Metacentric Height Apparatus Darcy’s Law Apparatus Free Vortex Apparatus Forced Vortex Apparatus Stroke’s Law Apparatus for Determining Viscosity Electrical Analogy Apparatus Heleshaw Apparatus Impact of Jet Apparatus Hydraulic Test Bench Experiments : Bernoulli’s Theorem V-Notch Pipe Friction Reynolds     Venturimeter, Orifices Meter Losses In Pipe Fitting Impact of Jet   Fluid Mechanics Models : Hook Gauges (a) 15 Cm (b) 30 cm (c) 50 cm Venturimeters (a) 25 mm (b) 38 mm(c) 50 mm Orifice Meter (a) 25 mm (b) 38 mm(c) 50 mm Differential Manometer 50 Cm Scale Demonstration Manometer 50 Cm Scale Pilot Tube Manometers 50 cm U Tube Double Column Manometer 50 Cm Inclined Tube Manometer 50 Cm Scale Piezometer Tube 50 Cm Scale

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Manufacturers
  • Secondary Business Type Wholesale Suppliers
  • Year of Establishment 1991
  • No. of Employees 20 - 50
  • Annual Turnover Below Rs. 0.5 Crore Approx.
  • Ownership Type Corporation/Limited Liability Company

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
Arban Industries is Manufacturers of GLOW PLUGS, Pelton Wheel Turbine Test, Notch Apparatus, Barnulic Theorem App, Francis Turbine Test Rig, Kaplan Turbine Test Rig, Pelton Wheel Turbine Test Rig, Centrifugal Pump Test Rig, Reciprocating Pump Test Rig, Axial Flow Pump Test Rig from Roorkee, Uttarakhand.
Read More »

Contact Information

Arban Industries

  • Mr. Jamshed Ali
  • No. 349 / 8 - B, West Amber Talab, Roorkee, Uttarakhand

Find Popular Pipe Friction Apparatus Dealers

top