Assorts Machine Tool Co. Tronica City, Ghaziabad, Uttar Pradesh

  • Wooden Ring Mandrel Wood Ring Stick

    Wooden Ring Mandrel Wood Ring Stick

    Request for Price

    Wooden Ring Mandrel in 2 different handle shapes made of hardwood. Stick Size 3- 15 mm Overall Length 320 mm including handle.

    Jewelry Type : Jwellery

    ...more
    Get Best Price
  • Clamping Holding Hand Tools

    Clamping Holding Hand Tools

    Request for Price

    made of hardwood, its a must set for every jweler whrther for making or repair job. These clamps can be used for various jobs of inside and outside holding of rings or other delicate jwelery parts. item a- ring clamp holder hand tool specifications holds ring without marring ring clamp measures 6" long leather jaws at both ends. Solid construction- metal hinged. jaw width -1" approx item b- outside ring clamp holder- large & small rings-jwelery working specifications holds ring on the outside in either of the 2 semi circular grooves. This feature gives a full access to the inside surfaces of large or small ring for polishing and any other engraving or texturing processes. overall length: 7-3/4" inches with 2 grooves for ring holding item c - single end ring clamp holder 6"- leather lined jaws jwelery making tool specifications clamp length 6"  leather lined jaws  jaw width: 1" &  jaw capacity : 1/4" thick approx

    Jewelry Type : Jwellery

    ...more
    Get Best Price
  • Wooden Cupola Punch Die Set

    Wooden Cupola Punch Die Set

    Request for Price

    High Quality Wooden Cuploa Punch & Die Set of 6 pieces. Head Diameter of the Mushroom Shape Punches are 40, 45, 50, & 60 mm Double sides Die heads on the wood base-2 on each side, means a total of 4 different sizes. Cup Depression Die on 1 side are of 1-3/8" & 1-3/4" &  Cup Depression Die on 2nd Side are of 2" & 2-1/2"  Base Size : 4-1/4" (Length) x 9-5/8" (W) x 1-1/8" (Height)

    ...more
    Get Best Price
  • wooden cupola punch bowl

    wooden cupola punch bowl

    Request for Price

    High quality wooden cuploa punch & die set of 6 pieces. Head diameter of the mushroom shape punches are 40, 45, 50, & 60 mm double sides die heads on the wood base-2 on each side, means a total of 4 different sizes. Cup depression die on 1 side are of 1-38" & 1-34" & cup depression die on 2nd side are of 2" & 2-12" base size : 4-14" (length) x 9-58" (w) x 1-18" (height)

    ...more
    Get Best Price
  • Wooden Base Stand Threading Lathe Tools

    Wooden Base Stand Threading Lathe Tools

    Request for Price

    Made of Quality Tool Steel-Straight Shank  Epoxy Black Finish  Die Holder Sizes are 13/16" (1/2" Straight Shank), 1" (1/2" Straight Shank) & 1-1/2" (3/4" Straight Shank). Supplied on a Wooden base Stand as shown in attached Picture.

    ...more
    Get Best Price
  • Wire Gauges

    Wire Gauges

    Request for Price

    Manufactured from stainless steel. Available in S.W.G & A.S.G. Standard  Very useful for measuring thickness of the wires.

    ...more
    Get Best Price
  • Wing Type Compass/ Divider

    Wing Type Compass/ Divider

    Request for Price

    Manufactured from high quality carbon steel with a polished finish. Points are hardened for increasing wear resistance. Quick release & lock. Used for scribing circle or arc in a layout work. prod. Code size (in inches) size (in mm) amewd-100 4" 100 amewd-150 6" 150 amewd-200 8" 200 amewd-250 10" 250 amewd-300 12" 300 amewd-400 16" 400 amewd-450 18" 450 amewd-600 24" 600

    Type : Wing Type Compass/ Divider

    Brand Name : assorts

    Material : cast iron

    Color : grinded

    ...more
    Get Best Price
  • Wing Compass Pencil Holder

    Wing Compass Pencil Holder

    Request for Price

    Manufactured from high quality carbon steel with a polished finish & features a strong pivot point that will penetrate the wood surface. The pencil holder at the tip of the leg ensures stability and accuracy, as well as making nearly any length of pencil usable.

    ...more
    Get Best Price
  • Wiggler Edge Center finder Set

    Wiggler Edge Center finder Set

    Request for Price

    Set includes a wiggler chuck to hold ball contact, disc contact & needle point attachments and an offset indicator holder. Very useful item for locating application points on milling & other machines. Comes in a beatiful wooden case styrofoam packaging.

    ...more
    Get Best Price
  • Wide Base Try Squares

    Wide Base Try Squares

    Request for Price

    Manufactured from Stainless steel Square. High Precision & ground.

    ...more
    Get Best Price
  • Wheel Revolving Knurling Tool

    Wheel Revolving Knurling Tool

    Request for Price

    Gives 3 different types diamond knurling pitches by just revolving the head & locking it at any one required position with a screw lock. Shank Size: 6- 1/2" x 1/2" x 7/8" Shank. Fitted with 3 sets of 5/8" x 3/16" x 1/4" Spiral (Right & Left) Coarse, Medium, & fine Knurl Wheels.

    ...more
    Get Best Price
  • Welders Magnetic Link Clamp

    Welders Magnetic Link Clamp

    Request for Price

    Widely used for Holding & Welding purpose. Can be set at any angle by Size 4" x 2- 5/8" adjustment & locking of the wing nut. Each Block measures 2" x 1" x 1". Overall length & width is 4 -5/8" x 2"

    ...more
    Get Best Price
  • Webbed Slotted Angle Plate

    Webbed Slotted Angle Plate

    Request for Price

    Manufactured from close grain caste iron small precision ground angle plate 2 machined slots in each side. Very useful when face plates work is required or on small milling machines. prod. Code size (inches) size (mm) avwap-111.a 2 x 3 x 2 50 x 75 x 50 avwap-111.b 3 x 3.5 x 2.5 75 x 88 x 63

    Type : Webbed Slotted Angle Plate

    Material : Cast Iron

    Color : Grinded & Black

    Finishing : Grinded Finnishing

    Brand Name : Webbed Slotted Angle Plate

    ...more
    Get Best Price
  • Watch Case Opener- Jaxa Style

    Watch Case Opener- Jaxa Style

    Request for Price

    This new case wrench, commercially called jaxa style case opener designed to open cases of bigger watch to accommodate sizes up to 55mm diameter. includes 4 sets of pins (round, flat, square & curved) to open all types of threaded cases., which are generally found in waterproof watches. These set of pins are selected to match the precise notch pattern on the caseback the tool’s large handle rotates to adjust the bottom pin, and the thumbwheel in the middle adjusts the two pins above.

    Size : up to 55mm diameter. Includes 4 sets of pins (round, flat, square & curved)

    Color : granded

    ...more
    Get Best Price
  • Watch Case Opener

    Watch Case Opener

    Request for Price

    This new case wrench, commercially called Jaxa Style Case Opener designed to open cases of bigger watch to accommodate sizes up to 55mm diameter.  Includes 4 sets of pins (round, flat, square & curved) to open all Types of threaded cases., which are generally found in waterproof watches. These set of pins are selected to match the precise notch pattern on the caseback The Tool’s large handle rotates to adjust the bottom pin, and the thumbwheel in the middle adjusts the two pins above.

    ...more
    Get Best Price
  • WAD Punch Set

    WAD Punch Set

    Request for Price

    Made of High Grade Alloy Steel Self Centering Holder, Interchangeable Punches, which are heat treated to harden & then ground for sharpness and durability which gives you a fine cutting edge Ideal to punch holes in Rubber, Felt, Leather, Plastic etc. The Punches covers a size range from 5- 32 mm which includes 5,6,8, 10,12.5, 16,20, 25& 32 mm

    ...more
    Get Best Price
  • lathe vertical slide

    lathe vertical slide

    Request for Price

    This is an accessory item compatible for myford ml7 lathes and other smaller mini lathes. Table size is 125 mm x 100 mm. It has a reading bush at the handle for calculating accurate travel of the bed and hence a precise job. The thread comes both in metric as well as imperial standard as per customer's market requirements.

    Type : Vertical Slide for Lathe- Fixed

    Brand Name : ASSORTS

    ...more
    Get Best Price
  • Vee Angle Plate Tee Slotted

    Vee Angle Plate Tee Slotted

    Request for Price

    Manufactured from high quality seasoned casting. Precision ground to serve as a Vee Block & Angle plate together. Multiple Clamping points & 2- Tee Slots for clamping

    ...more
    Get Best Price
  • tee slotted plate

    tee slotted plate

    Request for Price

    Manufactured from high quality seasoned casting. Precision ground to serve as a vee block & angle plate together. Multiple clamping points & 2- tee slots for clamping. Product code size (inches) size (mm) avvap-t335 3" x 3" x 5" 75 x 75 x 125 mm avvap-t446 4" x 4" x 6" 100 x 100 x 150 mm avvap-t557 5" x 5" x 7" 125 x 125 x 175 mm avvap-t668 6" x 6" x 8" 150 x 150 x 200 mm

    Brand Name : Vee Angle Plate-Tee Slotted

    Finishing : grandinig finishing

    Material : cast iron

    Color : grinded

    ...more
    Get Best Price
  • Vee Angle Plate Slotted

    Vee Angle Plate Slotted

    Request for Price

    Manufactured from high quality seasoned casting. Precision ground to serve as a Vee Block & Angle plate together. Multiple Clamping points.

    ...more
    Get Best Price
  • Vee Angle Plate- Slotted

    Vee Angle Plate- Slotted

    Request for Price

    Manufactured from high quality seasoned casting. Precision ground to serve as a vee block & angle plate together. Multiple clamping points. product code size (in inches) size (in mm) avvap-s335 3" x 3" x 5" 75 x 75 x 125 mm avvap-s446 4" x 4" x 6" 100 x 100 x 150 mm avvap-s557 5" x 5" x 7" 125 x 125 x 175 mm avvap-s668 6" x 6" x 8" 150 x 150 x 200 mm

    Brand Name : Vee Angle Plate- Slotted

    Finishing : grandinig fhinishig

    Type : Vee Angle Plate- Slotted

    Material : cast iron

    Color : grinded

    ...more
    Get Best Price
  • Knurling Tool

    Knurling Tool

    Request for Price

    1 Piece(s) (MOQ)

    Description: Sturdy V clamp type knurling tool. Can be clamped in Standard Holder of the Quick change tool post on the lathe. Tool Capacity ranges 5 -20mm Holder size : 38" x 38" x 2 -14" Paired with diamond kurls - left hand and right hand. Knurl size - 34" x 38" x 14" bore.

    Type : v clamp type knurling tools

    Brand Name : ASSORTS

    Material : Alloy Steel

    Application : Knurling

    ...more
    Get Best Price
  • Universal Peg Clamp Holder Tool

    Universal Peg Clamp Holder Tool

    Request for Price

    The 2" (50 mm) machined aluminium face has 60 holes with 8 loose pegs or pins. Jaw opens: 34" (inches) the pegs allowed its positioning in the holes to hold any flat, small or irregular shape parts for engraving, carving, filing, stone setting and jwellery making etc. Removable handle allows tool to be screwed directly to bench.

    ...more
    Get Best Price
  • Universal Machine Vise

    Universal Machine Vise

    Request for Price

    Manufactured from close grained high tensile seasoned cast iron. Screw spindle made of tool steel for longer life. Fully hardened & ground tool steel jaws. The swivel base is graduated 360 degrees in 1 degree increement. The 3rd angular slide with a moving axis allows any setting in 3d plane. Allows the work piece to set at any angle. Ideal for tool & cutter grinders. Prod. Code jaw width (inches) jaw width (mm) jaw opening (inches) jaw opening (mm) jaw depth (inches) jaw depth (mm) avumv-050 2" 50 2" 50 1" 25 avumv-075 3" 75 3" 75 1-14" 33 avumv-100 4" 100 4" 100 1-12" 38

    Brand Name : assorts

    Condition : new

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Exporters
  • Secondary Business Type Manufacturer / Wholesale Suppliers

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
Under the guidance of Sh. Suresh Chandra Gupta, the company was started in 1975 with a small set up to start manufacturing the American type Turning and Parting Tool Holders to supply to the people exporting it in their name from India. Today after around four decades years of manufacturing experience & with his 2nd generation in business, WE are one of the leading manufacturers- Exporter from India of large variety of Machine Tools Accessories for Hobby Machinists, Model Makers, Wood Workers, Carpenters & Industrial applications supplying to the various renowned retailers of Europe, USA, Asia & Other parts of the Globe.
With the Help of our well developed production & tool room facilities, and by the ardent efforts of our experienced team who possess sound knowledge & experience of the industry, have enabled us in becoming one of the most reliable name in the market today. The company's capabilities of manufacturing CUSTOM DESIGNED Items as per the customer's specification has made ASSORTS Machine Tools Company, a trusted source for a wide & comprehensive range of Precision Tools of International Quality Standards at Competitive prices.
Our main Product line range includes Lathe's Quick Change Tool Posts, Lathe Parting & Turning Tool Holders, Rotary Tables & Its accessories Like Clamp Kits, Dividing plates, Tailstocks, ER Collets Adaptors & Small Chucks with Back Plates, Knurling Tools, Lathe Alignment Test Bars, Vee Blocks, Revolving Centers, Vertical Milling Slides, Boring Heads, Fly Cutters, Arbors, Sleeves, Precision Vises For Milling, Drilling & Grinding, Bench Vises, HSS Lathe Form Tools & Carbide Brazed Tools Set, Lathe Chucks, Angle Plates, Surface
Read More »

Contact Information

Assorts Machine Tool Co.

  • Mr. Praveen Mishra
  • C 21, Sector B-2, Tronica City , Ghaziabad., Uttar Pradesh
top