Wind Speed and Direction Sensor
4,000 - 20,000 Per Number
1 Piece (MOQ)
Our Wind Speed Direction Sensor is a combination sensor is of light alloy construction to reduce overall weight. The Wind Speed Direction Sensor offered by us, is more sensitive at low wind speeds. The clients can avail Wind Speed Direction Sensor at market leading prices. Wind Direction : Wind direction is derived as a voltage on the wiper of a 20K pot,
hall sensor
Get Price Quote
Prismatic’s clamp type current sensors operate on the well-known Hall Effect principle. These current sensors are an excellent solution for sensing of Direct Currents as well as Alternating Currents of up to 3KHz, with excellent linearity and stability. The hinged clamp enables the easy installation of the device without the need for shut downs and disconnection of heavy primary cables.
Best Deals from Position Sensor
Non Contact Linear Position Sensor
32,000 - 36,000 Per
1 Piece (MOQ)
Heart Beat Sensor
1,999 Per Piece
hall effect current sensor
350 Per Piece
100 Piece(s) (MOQ)
Rotary Torque Sensor
100,000 Per Set
“Rotary Torque sensors” are specially designed for measurement of applied Torque with high accuracy. It consists of specially designed steel structure, which operates in a predictable & repeatable manner when torque is applied. This torque is translated into electrical signal as change in resistance of strain gauges, the change in resistance indicates the degree of deformation which in turn directly proportional to applied Torque. Bonded strain gauge Torque sensors are incorporated with four arm Wheatstone bridge network, which acts as an adding and subtracting electrical network.
Inductive ultra-mini sensors
Get Price Quote
10 Piece(s) (MOQ)
Ultra-mini inductive proximity sensors 1. Cylindrical diameter is from phi3, phi4 and m5. Max and min lengths available; 2. Rectangle size is 5*5mm; 3. Switching distance (sn) is from 0.6mm to 1.5mm; φ3 sn: 0.6mm, 0.8mm, 1mm; φ4 sn: 0.8mm, 1mm, 1.5mm; m4 sn: 0.6mm, 0.8mm, 1mm; m5 sn: 0.8mm, 1mm, 1.5mm; q5 sn: 0.8mm, 1mm, 1.5mm; 4. Operating voltage: 10-30vdc; 5. Short-circuit and reverse polarity protection; 6. Cable and pigtail type optional. 7. Standard: iec60947-5-2; 8. Protection degree: ip67 (iec60529)
Tri Axial Vibration sensor
Get Price Quote
5 Piece (MOQ)
VB-300SCB, industrial grade, screw lock type, staineless steel, triaxial vibration guage output signals are already rs 485. the signals include: 3 axis speed acceleration rms 3 axis speed acceleration fft 3 axis displacement peak to peak open signal protocols can be connected directly to third party plc/dcs 316l grade steel body ip67 protection
position sensor
Get Price Quote
Widely acclaimed for providing high quality products, we are known as the well-known Supplier in the market. We are a flexible company. We support our clients wholeheartedly and provide them with the option to make payment online or offline. We are comfortable with diverse payment methods. Our sophisticated position sensors are available in various sensor areas ranging up to 500mm.
Wind Speed Sensor
Get Price Quote
Acceleration Sensors
Get Price Quote
Whether they are leveling cranes, monitoring front-loader tilt, or controlling elevators – the fields of application for inclination and acceleration sensors from Pepperl+Fuchs are many. They ensure precise measurements, also in harsh outdoor conditions. An innovative, two-piece mounting concept makes the F99 series extremely robust: a rugged metal mounting bracket provides the sensor module with impact protection, and the concept allows the quick and easy exchange of the sensor module, if needed. Since the bracket can stay in place, there is no need for new adjustment or calibration. Depending on the individual requirements, you can choose different models from our inclination and acceleration sensor portfolio.
position sensors
Get Price Quote
Rotary Electronics offers Linear / Angular position sensors with Hall effect technology. These sensors have accurate position sensing with low hysteresis and very good linearity. The application include Throttle position sensing, Accelerator pedal module, Steering wheel position sensing, EGR valve position sensing, etc... These sensors have compact design for small foot print and are fully programmable. The features are as listed below. Angle measurement range : Programmable to any customer specific angle range, start and end angle Output: Analog / 12 bit ratio metric output Output with / without diagnostics Over voltage protection : 20 V Reverse voltage protection : ‐10 V Meets engine and chassis level vibration level Can be programmed for multiple linearity IP69K Water and dust ingress protection
Inductive type AC Proximity Sensor
Get Price Quote
We offer inductive type AC proximity sensor in 36mm dia.
IR Break Beam Sensor
429 Per Piece
1 Piece (MOQ)
accelerometers
Get Price Quote
ENTEST Technologies Private Limited exclusively represents M/s. The ASC (Advanced Sensors Calibration) GmbH has its headquarters in the Bavarian town of Pfaffenhofen and is one of the world's leading manufacturers of accelerometers, angular rate sensors and IMUs (inertial measurement units). The high quality of our products, customised solutions and fast delivery times are convincing arguments for many leading global companies from various branches of industry. ASC sensors are used, for example, in crash tests in road vehicle development, to monitor safety and wear and tear in rail vehicles, to monitor the stability of wind turbines or to measure the swaying of container ships. Accelerometers ASC products are characterised by their robustness and shockproof qualities and their high heat resistance. There are two product groups of accelerometers: Capacitative accelerometers work with a reinforced output signal, so even very small measuring ranges are possible. Capacitative accelerometers, uniaxial Capacitative accelerometers, triaxial In addition, piezoresistive sensors are produced which do not have a reinforced signal, instead they have a bridge output signal and are mainly used in crash tests. Accelerometers for crash tests, uniaxialAccelerometers for crash tests, triaxial
Proximity Sensor
1,000 Per Piece
1 Piece (MOQ)
Wind Direction Sensor
Get Price Quote
1. Voltage output Ex: 0 to 5V or 0 to 10VDC2. Curent Output: 4 to 20mA DC3. Modbus Output
Accelerometer
Get Price Quote
Mercury Tilt Switch Sensor Module
175 Per Piece
Piezoelectric Accelerometer
Get Price Quote
Wind Speed Sensor
Get Price Quote
EQ – FST201 Wind Speed Sensor is based on Hall Effect. The cup turns round once be blown. The wind speed variable transfer into relative signal output. The base is made of high strength alloy and finish by surface treatment and is featured with water proof, corrosion resisting. It can be used in harsh environment. Features : • Excellent Resistance against impact, overload, shock and erosion• Small and Exquisite, Easy to take, Simple to install• Alloy Material finish, Reasonable Structure design and nice outlook quality• Stainless steel wind cup, Anti – Wind load can reach 70m/s Applications : • Working Aloft Testing and Control• Engineering Machine Testing and Control• Weather Station and Environment Protection Testing and Control• Port and wharf Environment Testing and Control
Linear measurement sensors
Get Price Quote
Linear measurement distance sensor are used to determine the position,length and speed of an object without direct contact. These sensor uses a technology called laser-Doppler technology to determine this. You don’t have to use any special markers on the measured object. The sensor will generate a striped pattern of the measured object by two laser beams and a digital signal processor (DSP) uses to calculate the position,length and speed. Linear measurement sensor is widely used in the applications of tire industry, steel industry, printing and paper industry. For more call BIBUS INDIA sales engineer who will giude you to a best solution for your requirement.
LVDT Displacement Sensor
Get Price Quote
Inductive Type Proximity Sensor
Get Price Quote
Inductive proximity sensors are used to detect metal objects without physically touching them. It basically comprises of an oscillator whose windings constitute the sensing face. An alternating magnetic field is generated in front of these windings. When a metallic object comes in the range of magnetic field, the field strength will change. The change in the magnetic field strength is used to calculate the distance of the object. These are used as metal detectors, monitoring the position of machine parts, traffic signals and various other industrial applications. We manufacture inductive proximity sensors in different models and verities. Inductive type proximity sensors are used to detect the presence of metallic objects. The common use of these sensors is in traffic light system, metal detecting in industrial applications, conveyor belts, hosts etc. The disadvantage of these sensors is that it can't detect non-metals. It offers greater efficiency and higher sensing range. We offer these proximity switches in numerous specifications and types. Features:• Cylindrical or rectangular (surface) mount• Sensing ranges from 0.6mm to 100mm• Cabled or terminal connections quick disconnect or pigtai• AC, AC and DC, NAMUR Type Applications of proximity sensors:• Position recognition• Material tracking• Part recognition Types Of Electrical Outputs:• 2 Wire DC Type• 3 Wire DC Type• 4 Wire DC Type• 2 WIre AC Type
Piezoelectric Accelerometer
Get Price Quote
Beam Sensor
700 Per Pair
vibration monitoring system
Get Price Quote
VM-8000 is a continuous online monitoring system suitable for condition monitoring and machinery protection applications. The system measures 10-channel Non-Contact /Casing vibration. The system has dedicated 5 digit 7 segment displays for displaying vibration values. Also measured parameters will be communicated to remote terminal via MODBUS RTU on RS485. The system provides industry standard 4~20mA DC signal output for interfacing with Distributed Control System (DCS). The system has 8 programmable relays for alarm and trip. Read relay contacts provide for Alarm and trip. Each channel has tricolor LED indication for indicating OK, DANGER and ALERT status. Features: • Industry Standard 6U/24T Rack Size.• Digital Display Options. • Ten Channel Measurements.• Four Relay Output (Alarm Contact Output).• Built in power supplies necessary for sensors operation.• LEDs per channel for indicating OK/ALERT/DANGER status.• RS485 serial port with MODBUS RTU protocol..• 32 units can be connected in RS485 multi drop network.• All Settings stored in Non-Volatile memory to prevent any data loss.• Industry standard DC Power Supply +24 VDC.• Set Points for Alert Alarm Limits.• Set Points for Danger Alarm Limits.• Set Points for Alarm Time Delay.• Latching for Alert Alarm.• Latching for Danger Alarm.• Digital Communication.• Multi-function Key switch.• Highly reliable. • Easy to retrofit. • Highly economical.
Hall Effect Sensor
Get Price Quote
ADS 2217 is a Hall Effect Based, Non-Contact, Clamp type DC Current Sensor with an output of RS485. The Vent dia is 20mm. Standard unit can measure 0-100A. The Output is 0-2VDC & RS 485. Features Non-Contact current measurement Clamp Type DC CT Hall-effect based sensor 1% FSD Accuracy Built-in RS 485 Port
Wind Sensor
Get Price Quote
Inductive Sensor
Get Price Quote
We provide inductive proximity sensors in different price range as well as in the models. All the products provided by us are exclusively made and have all the attributes that should be present in every good quality product. Eventually, our company is a prestigious name in the photoelectric sensors manufacturers and suppliers.