Refrigerant Leak Detector Dealers (30 products available)

• Sensitivity 4g/a (0.15oz/a)• 2 sensitivity levels (High and Low)• 5 LEDs showing leakage with audible alarm• Low battery indication• Sensor defect indication & easy replacement of sensor

Errecom Coolshot – Performance Enhances Delivers colder vent air (approx. 2-3 °C) faster Delivers 54% higher lubricity to compressor oil Reduce vibration and noise Extends the life of the system by 20-50% Reduces annual maintenance costs by approximately 20% Available in 30Ml, 42Ml. High Quality Product from Europe.

Brand Name : Vighnaharta

Model Number : TS12CLR Ref

TS12(REF)R is ideal gas detector for detecting refrigerant gas leakages from Refrigeration systems in commercial and Industrial premises, Food Storage & Processing facilities, Supermarkets, Parking Garages, Wastewater Treatment Facilities, Hospitals and Universities. Variant models are available for different refrigerants like R410a, R408a etc. It has long life Semiconductor sensor. This model also provides Bargraph indication for level of concentration of gas. Four levels, 125, 250, 375 & 500 of PPM are provided. Alarm is indicated by sounding of beep at every level. After the concentration level crosses 500pm continuous alarm will sound and relay (PFC) output will change the status. It is available in Dustproof & Water Splash Proof � IP67 Enclosure. Models Available for following gases : HFC : R134a, R404a, R407c, R410a HCFC : R22, R401a, R406a, R408a, R409a. Gas Detector Models also available for other gases e.g. NH3, H2, H2S, Explosive Gases for different applications e.g. household, commercial and industrial.

Power Source : Battery

Display Type : Digital

Material : Plastic

Color : Yellow

Country of Origin : Made in India

Features : Microprocessor Control with advanced digital signal processing , semiconductor gas sensor, 7 LED Tri-colored Visual Leak Levellndicator, Auto power off: 10 minutes

Detector Type : Portable Multi Gas

Name of Gases Detected : Regferogerant

Brand : Hsetin

Model Name/Number : HT-523

Usage/Application : Industrial

Features : Three LED flashlight,Laser pointer

Product Code: EKE 2415 In old times refrigerant gas leakage was detected with the help of soap foam but with the help of refrigerant gas leak detector we can do the same job in more professional and reliable way.   Refrigerant Gas Leak Detector

Type : Refrigerant Leak Detector

Condition : New

Power Source : Battery

Warranty : 1Year

Gas Type : Refrigerant

Name : Tru Pointe® IR

Size : Unit: 7.5 x 3.75 x 1.75 in. (19.05 x 9.52 x 4.45 cm) Probe: 15.5 in. (39.37 cm)

Advanced Infrared Technology with 10 years sensor life Detects all CFC, HFC, HCFC and HFO-1234yf refrigerants 3 levels of sensitivity - 4/7/14 g/yr. Easy-to-use, 15.5" flexible rubberized probe plus rigid extension probe Rechargeable lithium ion battery    

Detects all refrigerants which are mainly used in Refrigeration applications like Ammonia (NH3) or Carbon Di-oxide (Co2) Detects all refrigerant gases which are mainly used in HVAC applications like Hydrocarbons, Halocarbons – HFCs (R134a, R404A, R40,R410A, R507), HCFCs (R22), CFCs (R12) Complete Electronic Panel for monitoring up to 99 Refrigerant Leak Sensors with BMS Compatible Optional Housings for sensors with IP56, Ip66, Exd etc. for all kinds of Environment conditions.

Detect and pinpoint even small leaks of refrigerant gases using the Model RLD1 Refrigerant Leak Detector. The RLD1 is effective in detecting existing refrigerants including HFC, HCFC, CFC, SF6, R134a, and R123. Unit features thumbwheel operation to increase sensitivity and audio and visual indication. An increasing tick rate sounds as a leak is pinpointed and the red indication light flashes more rapidly. The flexible gooseneck probe is ideal for hard to reach areas. Use the model RLD1 for use in domestic and commercial refrigeration systems, automotive, air conditioning, and quality control testing environments.

Features : Visual leak level detector,Detects leak as small as 3gr,Detects all refrigerants,

Weight : 15.6 oz (442 g) including battery

The Tru Pointe IR is a handheld refrigerant leak detector that utilizes a long-life infrared sensor in a low-cost package to effectively pinpoint leaks of CFC, HFC, HCFC and HFO refrigerants. Ready for use in 30 seconds and with 8 hours of battery life in a single charge, the Tru Pointe IR is truly a go-to The Tru Pointe IR has a long, flexible neck and the kit includes probe extensions (including a “needle” probe) for detecting leaks in hard-to-reach areas. Selectable sensitivity settings and an LED scale shows relative leak sizes while the auto-zeroing feature enables leak detection in backgrounds where target gas is present. Includes 1 year warranty that also covers the IR sensor.

Material : Gas Detection

Display Type : Digital, Analog

Power Source : 24 VDC

Brand : MSR Germany

Measurement Range : 20-2000 ppm

Usage/Application : Refrigeration Gas Leak Detection

Model Name/Number : MC2-D-S2080-02-A-0

Weight : 200 grm

This next-generation Refrigerant Leak Detector D TEK Select uses an innovative infrared absorption sensing cell that is extremely sensitive to all refrigerants. D-TE K Select maintains that sensitivity over time for consistent, accurate and reliable performance. The sensing cell lasts for approximately 800 hours. The Latest D TEK Select is also improvised with a charging status indicator, sensor failure indication, and NiMH (nickel metal hydride) batteries. All in an easy-to-use unit with the quality and durability How it Works At the heart of the D-TE K Select Refrigerant Leak Detector is an infrared absorption filtometer. It consists of a sampling cell with an infrared source (or emitter) at one end, an infrared energy detector at the other end, and an optical filter in between them. Like the visible light we see, infrared energy is part of the electromagnetic energy spectrum. Most materials absorb specific and known wavelengths of infrared energy. The particular wavelengths of energy absorbed by a material are known as its absorption spectra. All refrigerants have similar absorption spectra in the range of 7.5–14 micrometers. The infrared source (emitter) creates a high-intensity stream of energy incorporating all wavelengths in the infrared spectrum. The stream passes through the optical filter, which blocks all wavelengths except those that refrigerants absorb. The filtered infrared energy strikes the detector and causes it to heat up. When refrigerant is drawn through the sampling cell by the internal pump, some of the infrared energy is absorbed by the refrigerant. This causes a decrease in the amount of infrared energy reaching the detector and a corresponding drop in the detector’s temperature, which triggers the D-TE K Select to alarm. This whole process takes a fraction of a second. FEATURES AT A GLANCE 0.10 ozyear (3 ga)sensitivity Sensitive to all refrigerants, including R-22, R-134a, R-404a, R-410a, R-507 (AZ-50) and all CFCs, HCFCs and HFCs.800-hour infrared cell life for low cost of ownership.Infrared cell does not weaken over time, so response remains consistent and accurate.Infrared cell cannot be overloaded or “poisoned” by exposure to large amounts of refrigerants.High-efficiency air sampling pump provides quick response and quick clearing (“zeroing”).On-board diagnostics indicate charging status and warn of low battery or infrared cell failure.N iMH power stick is environmentally friendly, won’t corrode, and provides greater charging capacity.Enhanced filter design for superior filtration and resistance to contaminants.Ability to run off AC power adapter.

Brand : Fluke

Model Name/Number : RLD2

Operating temperature : 0 DegreeC to 50 DegreeC

Wavelength : 395 nm

Warranty : 2 years on the instrument , 1 year on the sensor

Battery Life : 6 h

Operating Temperature : -20 to +50 C

Length of gooseneck : 370 mm

Oper humidity : 20 to 80 %RH

Storage temperature : -25 to +70 C

Power supply : 1 battery block

Dimensions : 190 x 57 x 42 mm

Weight : 348 g

Minimum Order Quantity : 1 Unit

MSA Chillgard VRF Refrigerant Leak Detector is the first industry detector for Variable Refrigerant Flow Systems (VRF) with integrated BACnet capability. Therefore, it can be directly connected with any Building Management Systems (BMS). MSA applies its proven Photoacoustic infrared sensing technology that provides a stable zero baseline, minimizes cross-sensitivities and offers low cost of ownership through minimum maintenance required.   Low-level detection at 25 ppm minimum detection Versatility—capable of operating within wide temperature and humidity ranges Low maintenance—no moving parts and stable PAIR sensor technology Easy installation—simply secure back plate to wall 20-year proven photoacoustic infrared sensing technology Digital communications BACnet® Modbus

Brand Name : V-Tech

Display Type : Digital

Battery operated. Battery life : 30 hours under normal conditions

Max Sensitivity : To halogenated refrigerants,3 gr/yr

Power supply : 3V DV (2 quality batteries)

Probe length : 35.5 cm

Reaction time : Instant

Resetting time : 2 seconds

Size : 22.9 cm x 6.5 cm x 6.5 cm

Warm-up : About 6 seconds

Working temperature : 0-52 degree

General description a hand held detector able to detect all halogen refrigerants (cfc, hcfc and hfc) enabling you to find leaks in your refrigeration system. One of the most sensitive refrigerant leak detectors in the industry features six-segment visual leak size indicator audible alarm high and low sensitivity level cordless 5 ppm sensitivity (less than 0.2502 per year) supplied in carrying case and spare sensing tip batteries 2 pcs c-cell alkaline benefits delivered in sturdy carry case includes batteries and spare sensing tip technical data alt. Name unirix-1a respons time instantaneous reset time 1 second probe length 35.5 cm - 14" weight 560 g for optimum performance, wss recommends to replace the sensing tip (kit with product number 548700 contains three tips) and batteries on regular basis. Sensing tip life is approximately 20 hours battery life is approximately 30 hours

Display Type : Digital

Model Name/Number : testo 316-3 - Refrigerant leak detector

Brand Name : Testo

Color : Black

Battery Life : 16h permanent operation

Dimensions : 270 x 60 x 61 mm

Operating Temperature : -18 to +50 DegreeC

Minimum Order Quantity : 1 Piece

Model : KM 315

Alarm mode : Sound, light

Accessories : Instruction Manual, Battery & Carrying Case

Weight : approx. 240g

Length of Probe : 23cm / 9M

Dimensions : 171 x 43 x 38 mm

Power Supply : 1.5V AAA battery

Operating Temperature & Humidity : 0 DegreeC

Display Type : Digital

Model : RD300

Measurement Range : 0.99oz/yr to 0.25oz/yr

Power Source : Electric

Minimum Order Quantity : 1 Piece

Fast, accurate, & versatile. Long life expectancy.Toggle between three levels of sensitivity down to 0.1ozyear.Only 30 seconds between start up and detecting.Finds leaks even with refrigerant in the air surrounding the leak.Peak reading indicator with manual reset to clear.

Operating Temperature : 30

Sensor : Heated Diode

Refrigerants : R-22, R-134a, R-404a, R-410a, and all CFCs, HCFCs and HFCs

Auto Power Off : 10 Minutes of Idle

Flexible Probe Length : 18" (450 mm)

Storage Temperature : 14 Deg F

Dimensions : 184 (L) x 70 (W) x 40 (H) mm

refrigerants leak detectors, Air Conditioning Spare Parts, Dehumidifier

Refrigerant Leak Detectors, Copper Tube Bender, Solest Refrigeration Oil

Refrigerant Leak Detectors, compressed air management products

Refrigerant Leak Detectors, Pipe Grooving Machine, drain cleaning machine

refrigerant leak detector, Flue Gas Analyzer, Vertical Tube Furnace

Fluke RLD 2 UV Refrigerant Leak Detector, Fluke 50 Series II Thermometer