Epoxy Paints Dealers in Bhavnagar (5 products available)

• Type: Drinking Water, Epoxy
• Certification: FSSAI Certified
• Application: Drinking Purpose, Drinking Water Tank
• Cap Type: Flip Cap
• Conditio: Fresh
• Grade: Food Grade
• Resistivity: Resistance against bacterial growth & Excellent corrosion resistance
• Cleaning: Easy
• Durability: Long Life

This epoxy paints is a 100 % solvent-free, two –component, High-Build, Polyamine adducted cured epoxy paint specially developed for long term protection on concrete and steel potable water tanks. The product is designed for use at both new building and maintenance of existing potable water tanks. The product contains no solvents, benzyl alcohol or nonyl phenol that can influence taste or smell. This means that quality water is mainntained that way. This Products is approved by the Water Research Centre (WRAS), Great Britain, according to BS 6920 for potable water up to 23°C/73°F. It is also covered by the Norwegian Health Authorities (Folkehelseinstituttet), Norway, for use in tanks for potable water offshore according to system 3A in NORSOK M-501, revision 5.    Product features and benefits Certified and approved for portable water use 100% Solvent-free and Benzyl alcohol free Application friendly Long overcoating window Light colour for easy inspection     Certificates/Approvals : This products is in accordance with ARAMCO's specification APCS 2A, 2B and 2C. Approved for aviation fuel storage tanks by Exxon Mobil Aviation International Ltd. England. Approved by Water Research Centre, Great Britain, for potable water up to 23°C/73°F. Approved by Folkehelseinstituttet, Norway, for potable water - cold water. Certified by NSF, USA for use in potable water tanks with volumes of 1000 gallon or greater, valves at 2 inches (5 cm) or greater, pipes at 16 inches (40 cm) or greater. NSF certification applies to US manufactured product only. Conforms to Norsok M-501, system no. 3.

We offer Acid Resistant Epoxy Paints that are concentrated sulfuric acid resistant. The Novolac Epoxy Coating For Concentrated Acids is based on advanced coating formula. Typically, the Acid Resistance Epoxy Paints Coating is a two - component, rigid, novolac epoxy coating with excellent resistance to concentrated sulfuric acid, other strong acids and bases, and many chemicals found in industrial environments. When seeded or blended with aggregate, it can be used on properly prepared concrete and steel substrates to provide a chemical resistant surface with excellent slip/skid resistance and wear characteristics. This product is ideally suited for use in containment areas requiring resistance to strong mineral acids, Acid Resistance Epoxy Paints will bond to prepare dry and damp concrete substrates and cures to a tough, blush free, tile like surface. When used outdoors, the coating is freeze/thaw resistant and will not embrittle, however it will acquire a chalky surface when exposed to sunlight. The standard color is concrete gray (tan gray).Features Convenient 2:1, by vol. mix ratio Fast cure for short downtime Cures to a tough, blush-free, tile-like surface Bonds to dry and damp substrates without primer Does not embrittle when exposed to direct sunlight Resistant to most strong mineral acids and bases Environmentally safe - 0 VOC solvents Limitations :  Do  not  apply  on  wet  substrates.  Minimum installation and cure temperature is 50°F. Apply after daily substrate temperature has peaked. Substrates on or below grade must have a functioning vapor barrier to minimize the potential for blistering or delaminating of the applied coating. Broadcast aggregate must be resistant to the chemicals used in the exposure area and must be completely encapsulated by a topcoat. Exposure to 98% sulfuric acid will cause formation of a reddish surface film that can be removed by washing with water. Do not add solvents or otherwise thin this material.Packaging & Colors : Package sizes of Part A + Part B are 3 and 15 gallons. Standard color is tan-gray; black, white and brick red custom colors available.Shelf  Life :  Three  years  minimum  in  unopened,  original containers when stored between 60 and 90° F in a dry place away from sunlight. Remixing of components may be required upon long-term storage.Surface Preparation : Concrete surfaces may be dry or damp (not wet) though dry substrates are preferred and must be sound and free of all bond-inhibiting substances. Prepare surfaces in accordance with ASTM D 4259 or ACI 503R and ChemCo Systems' specific recommendations. Cleaned concrete surfaces should have a minimum strength of 250 psi in direct tension. Steel surfaces should be cleaned to "white metal" according to SSPC SP 5.Mixing : Acid Resistance Epoxy Paints is a two-component system. The resin to hardener (Part A : Part B) mix ratio is 2 :1, by volume. Read all material safety data (MSDS) information before handling the product. Wear safety glasses and clean neoprene rubber gloves when handling the materials. Premix the individual components before use. Transfer appropriate quantities of Part A and Part B into a mixing container. Use quantities that can be applied before the pot life of the mixed material expires. Blend thoroughly using a Jiffy mixer blade attached to a low speed (350 - 750 rpm) electric or pneumatic drill. Proper mixing will take 2 - 3 minutes. In cold weather, pre-conditioning the components to 70-85°F will allow easier mixing and application.Installing : The recommended applied thickness for floor and wall coatings is two coats minimum at 6 - 8 mils per coat. Apply in multiple thin coats rather than one thick coat using a stiff bristle brush, short nap roller, squeegee or two-component spray equipment. For optimum chemical resistance, 3 coats are recommended. Subsequent coats may be applied as soon as the previous coat is “touch” dry (6 - 7 hr @ 70°F). Avoid excessive cure times between coats. The recommended applied thickness for floor surfacings is single or multiple coats at 20 - 30 mils per coat. Pour mixed material onto the substrate and spread to the desired coverage with e V-notch trowel or squeegee. Aggregate, if used, must be broadcast onto the coating within 15 minutes of application. The recommended aggregate size is #20 x 40 or #30 x 50 mesh. Typical aggregate broadcast rates are .75 - 1.50 lb/sq ft.Clean up : Excess mixed product is best removed from the work area end tools before it hardens. Use of rags and solvents such as acetone or heavy-duty detergents facilitate cleaning. Cured product may be removed from tools by soaking in an epoxy stripper.

• Type: Epoxy Paints, Wall And Floor Paintings
• Brand Name: Jotun
• Application: Brush
• Color: Blue, White, Yellow
• State: Liquid
• Finish: High Gloss
• Packaging Size: 1-5 L, 5-10 L
• Gloss Level: Matt
• Volume Solids: 80%
• Practical coverage: Allow appropriate loss factors
• Method of Application: Airless Spray, Air Spray, Brush, Roller

Acid Resistant Epoxy Paints, Food Grade Epoxy Paint, Industrial Greases

metal container, Paint, Dyes, thinners, industrial storage system