BIBUS INDIA PRIVATE LIMITED Doddaballapur, Bangalore, Karnataka

If you a manufacturer of stacker cranes for stores or conveyor systems manufacturer then this product is for you. These distance sensors are enabled with ISD infrared wireless data transmission which can communicate from the vehicle to the control unit wirelessly. These optical data transmission consists of an optically aligned pair comprising sender and receiver because its wireless and it can communicate two way over long distances.

Type : Gravity Conveyor

Supply Ability : 1 Meter/Meters per Month

After-Sales Service Provided : No overseas service provided

Dimension(L*W*H) : Fully Customizable

Model Number : Gravity roller conveyors

Piab's Industrial vaccum pumps ensures excellent performance at both low and high feed pressures – ideal for situations where compressed air lines deliver air at low or fluctuating pressures. These vaccum pumps are based on the patented technology called COAX® technology, which can operate within the range of 0.17 to 0.60 MPa. These vacuum pumps were developed to provide extra vacuum flow in combination with deep maximum vacuum levels while keeping energy consumption at a minimum. Piab pumps have no moving parts that vibrate or wear out – important features that contribute heavily to outstanding operational reliability and a pleasant, noise-free working environment. piINLINE® MICRO are small light-weight inline ejectors which use the patented COAX® technology inside with flexible mounting options. They can be mounted directly on the hose close to suction cup (or point of suction).

The vacuum conveyor is reliable and requires a minimum of maintenance. It is, however, necessary to regularly change some of the parts to maintain maximum productivity. To filter dust and other small particles from the vacuum flow. Reduces the risk of operation breakdown or stoppage in the pump. There is a selection ATEX approved filters and a selection of stainless steel filters for sterilization when cleaning.

To complete the conveying system and create the optimal solution for the application some accessories are useful. Vacuum pumps/generators To optimize, upgrade or complete a conveyor, Piab offers also the vacuum pumps/generators as a standalone. Feeding It is important to optimize the feeding point (where the product is conveyed from) for the conveying system to assure maximum capacity and safe transport. Piping To complete the conveying system Piab offers stainless steel pipe bends, food grade hoses, different types of pipe fittings, pipeline emptying units, pinch valves and many other solutions. Controls Piab control units are fully pneumatic operated with an extremely reliable function. The full pneumatic design also removes any source of ignition from the system and at the same time simplifies the validation process. Other Vacuum filters, mounting girdles etc.

Vacuum Cartridges COAX® is an advanced solution for creating vacuum with compressed air. Based on Piab’s multistage technology, COAX® cartridges are smaller, more efficient and more reliable than conventional ejectors, which allows for the design of a flexible, modular and efficient vacuum system. A vacuum system based on COAX® technology can provide you with three times more vacuum flow than conventional systems, allowing you to increase speed with high reliability, while reducing energy consumption. COAX® MICRO The two-stage COAX® cartridge MICRO is probably the world's smallest multistage vacuum ejector. Its low weight makes it suitable to integrate close to the suction point in high speed pick-and-place applications of small objects. The Bi03-2 is suitable for very low or fluctuating feed pressures, Xi2.5-2 is best for handling sealed objects and the Si02-2 is good for handling porous materials or if surface leakage is present. COAX® MINI The two-stage COAX® cartridge MINI has small mounting dimensions and the three-stage COAX® cartridge MINI has high initial vacuum flow. The Pi cartridges offer high system reliability in case of fluctuating or low feed pressure and are suitable for handling sealed objects. The Si cartridges have large vacuum flow in relation to energy consumption and are good for handling porous materials or if leakage is present. The Xi cartridges is the right choice for handling sealed parts and when deeper vacuum level is needed.  COAX® MIDI The two-stage COAX® cartridge MIDI has small mounting dimensions and the three-stage COAX® cartridge MIDI has high initial vacuum flow. The MIDI cartridges are efficient generators of blow-air and are also suitable for fast evacuation of large volumes. The Pi cartridge is recommended for non-leaking applications, or if the feed pressure fluctuates due to pressure drops, in order to secure high reliability of the vacuum system. It is also used in specific blowing applications. The Si cartridges are recommended for leaking applications and have large vacuum flow in relation to energy consumption. The Xi cartridges are recommended for sealed applications and when deep vacuum is needed. This is the right choice when vacuum levels higher than 75 –kPa are needed. piCHIP The lightweight piCHIP unit is a small vacuum pump which is optimized for integration. It is flexible enough to surface mount quickly on a variety of materials. With its almost silent operation, the piCHIP is ideal for clean room operations. Medical and electronic industries are best suited to use this product in their vacuum applications. Because COAX® cartridges are up to twice as fast as other cartridges and provide three times more flow than a conventional ejector with the same air consumption, the piCHIP is able to provide a high performance even at low or fluctuating feed pressures (0.1-0.6 MPa)

Ultrasonic sensors are used to measure the distance and object by sending sound pulses. The time it takes for a sensor to send and receive the signal determine the distance. The major benefit of ultrasonic sensors is that they can detect the distance of the clear objects and clear liquids.

Bought a new led tv? Try our motorized tv lift and surprise your family and friends. Talk to BIBUS INDIA sales to know more on our precision-engineered line of TV Lifts, built to last and quiet. We have two type of motorized tv lift one with 650 mm stroke length other 1000 mm stroke length. TV lift system consists of lifting column, mounting panel, control box, wired remote and a remote control for convenient way to realign a screen for optimal use. Control box has the option to set your desire height and depth for the TV lift. You can find the details on how to set the height and depth from the troubleshoot section on the right side. Features - Lifting column for TV and systems with remote - Stroke 650 mm / 1000 mm - Rotating 120 ° left or right - Operating temperature range 0°C to 40°C - Universal mounting plate for different TV types - Operate with wireless remote - used for curved and flat led TV

New easy-to-use SCG Series (ø32 to ø100) air cylinders - Remove toxic substances and protect the environment by preventing contamination. Less installation space is required because the cylinder is up to 40 mm shorter than the conventional cylinder. Products match a variety of equipment with a uniform white exterior.

The thrust cylinders are linear actuators, designed for a high force to size ratio. This makes the cylinder ideal to use for clamping, riveting, punching and similar applications where a high force is required. The range includes 14 different versions, providing forces from 1600 to 25 000 N (at 6 bar), single‑ as well as double acting and in piston or diaphragm design. The single‑acting version has a built in powerful spring for the return stroke, but for applications where a high force is required in both directions there is the double‑acting version. The cylinder body is an all zinc plated sheet of steel and the piston rod, which is guided in two maintenance free bearings, is provided with flats and a male thread. To facilitate the installation, the guiding sleeve is provided with a thread which can be used either for direct mounting in a threaded hole or for installation in a free running hole using a lock nut.

TPU Suction cup are used to for a mark-free material that leaves no trace on the object being handled. Suitable for flat surfaces. The cleats stop deformation by preventing suction of the object into the cup. The suction cup has good stability and very little movement. Also suitable when the lifting force is parallel to the surface as the cleats increase friction. The same applications as for short bellows. Also suitable for smooth objects requiring a very clean surface. Only light weight objects should be handled when the lifting force is parallel to the surface

Suction cups for oily surface DURAFLEX suction cups uses a strong wear resistant and elastic polyurethane material which makes the suction cup strong and stable and, at the same time, soft and flexible. Ideally suited for applications with oily surfaces or where micro-leakage can occur. Duraflex suction cups has a wide range fo accessories; Single Durometer Pliable suction cup with high wear resistance Silicone-free and mark-free Dual Durometer Pliable suction cup with high stability and durability Firm bellows and a soft lip make the suction cup stable, durable and flexible with excellent sealing properties Silicone-free and mark-free Friction  Pliable suction cup with high stability and durability Exceptional grip/shear force on oily surfaces High wear resistance; wear will not degrade the grip performance Silicone-free and mark-free Bag Pliable suction cup with high stability and durability BL-3P; Stable yet flexible bellows with a sealable and soft lip

Thousands of suction cups ready to improve your machine. A unique configurable suction cup concept with individually optimized parts for gripping, lifting and height compensation. A large selection of fittings makes pig RIP® cups ready to fit new machines and easy to retrofit existing cups. Available are both threaded and push on fittings. In applications with a centralized vacuum pump, flow restrictors reduce vacuum flow and maintain vacuum when handling non-leaking objects. One support per size works as a gateway for all bellows and lips (flat cups). Firm and Stable 1-, 3- and 6- folded bellows allows for faster machine speeds. Thin-wall design makes them faster to compress using less force and energy. The strength of the material increases lifting capacity between 30-50% compared to similar conventional cups. A low micron filter disc inside the bellows traps dust and particles increasing system reliability. A mesh filter is available in the fitting. Get an excellent grip on almost anything with the right lip for your application. Choose standard lips from 60° shore to extremely flexible, soft lips in 30° shore. Tailor-made Bag lips for handling bags and pouches. Even foam lips for objects which are difficult to grip with traditional cups.

Appearance : Modern

Material : Metal

Brand Name : Jiecang

Size : 1194-1800mm Extended range of frame

Type : Office Furniture

Color : Grey, Black & White

Normal closing gripper by spring High repeatability & long life by jaw united cross roller Twisted it is strong hardness plunger For precise positioning of individual gripping jaw

Certification : CE ( European Conformity), UL60601-1/EN60601-1

Leading to compact and space saving. 6, 10 mm bore ultra compact size. Optimum for sucking and transfer process of precise parts! Overall length of axial cylinder is reduced. This is optimum for suction or transfer process of electric parts and precise parts. Features High precision non-rotating mechanism Non-rotating guide rod equipped. This series is suited for the sucking and transfer of electric parts and precise parts, etc.   Space saving design Work piece sucking section and vacuum passage are provided at guide rod. This enables short overall length of cylinder and results in dramatic space saving. Direct 2 surfaces mount Square shaped body enables direct mount on 2 surfaces.   A variety of sucking pad available Installation onto the rod end can be performed by just one piece of wrench. A variety of socket type suck-ing pad are available including 2 to 10 mm outer diameter and 24 different types (options).   Miniature switch installation possible F type switch can be integrated into the main body groove.

Application : Height adjustable tables for Home & Office,

Feature : Single column & Double column

Specific Use : Office Desks

Appearance : Modern

Material : Metal

Brand Name : Jiecang

SICK’s single-beam photoelectric safety switches consist either of testable senders and receivers, or of testable senders and receivers combined with an evaluation unit. These devices have an impressive scanning range and are offered in a variety of shapes and sizes. They also offer maximum safety performance as they comply with type 2 or type 4 in accordance with EN 61496 and PL c or PL e in accordance with EN ISO 13849. With products from SICK, you can solve a wide range of applications - whether it is for robots, processing machines, machining centers, palletizing systems, high-bay warehouses or transfer lines. SICK offers customer-friendly, high-quality solutions. Benefits: Reduced inventory costs: Photoelectric safety switches can also be used for other automation applications. You only need to keep one type of through beam photoelectric switch in stock and can thus reduce your costs. Safe in extreme environments: All single-beam photoelectric safety switches from SICK have an IP 67 enclosure rating and are well-equipped to withstand extreme conditions, such as heat (up to +60 °C), cold (to –40 °C) or humidity. SICK also provides solutions for changing ambient conditions and for use outdoors. Flexible technology that adapts as required: SICK photoelectric safety switches offer you more flexibility than ever before, such as a wide range of shapes, sizes and types and a choice of housing materials. Whether you need rectangular or cylindrical photoelectric switches, at SICK you will always find the right solution for your application. Impressive performance, optimum price: You will also benefit from an optimum price-performance ratio. SICK products are ideally matched to one another.

These silicone suction cup material is approved by FDA (FDA 21 CFR 177.2600.) and meets EU's regulation EU 1935/2004. Most of these cups are transparent with no addition of pigments.  There are different types and shaped FDA approved suction cups. Cups used for objects with curved, irregular or flat surfaces. Suction cups with soft and pliable and which can operate at a wide temperature range. Suction cups for handling long and narrow packages when maximum lifting force is desired. Suction cups optimized for bags with fragile contents and food.

Conductive silicone suction cups are suitable for objects with sensitivity and static electricity. These type of suction cups are suitable for flat objects such as cardboard, sheet metal, glass and porous materials. The cleats stop deformation by preventing suction of the object into the cup. The suction cup has good stability and very little movement. Also suitable when the lifting force is parallel to the surface as the cleats increase friction. For handling objects with flat or slightly curved surfaces.

Brand Name : Jiecang