circulation heaters
Get Price Quote
100 Piece (MOQ)
Prominent & Leading Manufacturer from New Delhi, we offer circulation heaters. Circulation Heaters, Specifications : Voltage: 380V, Power(W): 10kW, Material: Stainless Steel
Multi Stage Circulation Heating System
5,000 Per Piece
10 Piece (MOQ)
Best Deals from Circulation Heaters
Circulation Heater
2,000 Per Set
1 Set(s) (MOQ)
Circulation heater is a combined unit of an Electric heater bundle inserted inside a Pressure vessel or shell, in which fluid will be flowing continuously. It is a compact heating system with fast heating of the process fluids.The Circulation heaters are designed in such a way that cold process fluid enters the pressure vessel through inlet nozzle at a low temperature, passes though the active zone of the heater bundle and leaves the vessel through outlet nozzle at desired high temperature. The system is designed in such a way that heating element skin temperature and the pressure drop across the nozzles are maintained within permissible limits. The Circulation heater system can be designed in single stage vessel or multi-stage vessels based on the process requirements. The System can be installed vertically or horizontally based on the requirement and space availability.Advantages Environment-friendly design. No hazardous gas / smoke/ emission from the system. Compact design for quick heating of continuous flow. Can be used for short duration operation as well as continuous operation. Precision Temperature control Can be accommodated in small foot prints. Custom designed to meet specifications. Highly energy efficient and provide maximum dielectric strength. Compatible with standard industry piping and safety standards. Reliable design Easy to operate and maintenance-friendly Energy Saving Heating Element: Mineral filled insulated Heating Elements or Tubular heating Elements with Ni-Cr (80-20) as heating Coil and suitable outer sheaths Control System: Thyristor control Panel + Local control Stations for effective temperature control & safe operation. ( Safe area or Hazardous area) Protection and Control: Element Skin Temperature controls, Process temperature control, Earth leakage protection, Overload current protection ConstructionTypical Circulation heaters are made of below-listed parts.Terminal Enclosures — The Design of terminal enclosure changes based on the area of installation (Safe or hazardous). The Terminal enclosure is designed to protect the terminals of the individual elements from external impact, such as dust, moisture etc and to facilitate the connection of Incoming power supply to the heater bundle. Marathon flameproof heaters are certified to install in hazardous area zone 1 &2,Gas group IIC,IP 66Heater Bundle : Consist of No. of U Pin heating elements adequately supported by set of Baffles & Tie rods, designed to deliver the specified temperature at outlet by maintaining the element temperature & pressure drop within the safe limits. Heating elements can be fixed to heater flange by means of standoff sleeve pipes with brazing or by direct welding or by means of threaded couplings. Heat duty of a bundle can be divided in to many sub groups (banks) based on process conditions. This will help in better control as flexibility in the operation.Pressure Vessel: Pressure Vessel or heater housing is a fabricated shell in accordance with ASME or equivalent international standards. The Vessel has a inlet and outlet nozzle for the process fluid to flow. The Vessels are also provided with a drain & vent nozzle for the maintenance & safe operation purpose. The Vessel can be designed for either horizontal or vertical installation with single stage or multistage configuration. It is recommended to have the vessel insulated so as to avoid excess heat loss and also to protect from any thermal shock.Temperature Sensors: The Heater bundle will have Element skin temperature sensor for monitoring and regulating the Element skin temperature within the limits. The Unit may also need additional sensors such as Tube sheet Temperature Sensor, Terminal Box Sensor, vessel Body temperature sensor and process fluid Temperature sensors based on case to case. The Sensors used for the system will be certified in accordance with the area of installation.The Temperature sensors are Typically RTD or Thermocouple. A simple heater bundle can also be controlled using Thermostat protection for skin & process temperature. If the Operation pressure is High, It is recommended to have a PSV (Pressure safety Valve) installed within the Heater Vessel as an additional safety measure.Control Panel: Heater controls Panel are designed to monitor & control the operations of the heater bundle also to ensure the safety of the equipment and operations.The control logic can be either ON/OFF (contactor) or regulated (Thyristor) or combination of both in a single panel. The control panels can be installed in both safe area & hazardous area by following respective design guidelines & certification requirements.The Control Panels are provided with various indication systems such as Power ON, Heater ON OFF, Trip, High Temperature etc for comfortable handling of the process. The Temperatures of Elements, Process fluid & other areas (with sensors) are displayed on the Panel for better monitoring & awareness. Control Panel will also have safety interlocks such as high element temperature, Earth fault, process over-temperature etc along with Emergency stop access for the safe operation and control.Application Areas Oil & gas Refinery & petrochemicals Gas processing plants Air separation unit Power plants Oil heating skid Fuel gas /natural gas skids Vaporizers
Flanged Circulation Heater
Get Price Quote
We are a commendable manufacturer and supplier offering wide array of Flanged Heater. Designed and manufactured with precision to suit the varied client requirements, our products are hugely popular in the domestic as well as international marketplace. It is due to the hard work and dedication of our team that we are able to provide world class Flanged Circulation Heaters, Flanged Immersion Heaters, etc. to the customers. The immersion heaters find application in oil heating, water chemical tanks, electroplating industry, chemical plants, oil filtration plants, etc. We fabricate the entire range of heaters in sync with the industrial norms and latest engineering standards. Excellent features of our Flanged Circulation Heaters and Flanged Immersion Heaters: Compact and portable Robust in design Low power consumption Available in bent and straight length High heating capacity Easy to use and maintain Stable performance 100% safe and reliable
Circulation Heater
Get Price Quote
1 Piece(s) (MOQ)
Circulation heater is basically an immersion heater covered by an anti-corrosion metallic vessel chamber. It accompanied by National Pipe Thread (NPT) screw plug or ANSI flange heater assemblies mated with a pressure vessel. The vessel is mainly used to provide insulation to prevent heat loss in the circulation system. An inlet flange transports the fluid into the circulation system, which is then circulated and heated until the desired temperature is reached. These Gas Heaters has been designed to be connected to any location / situation / atmosphere conditions. The powerful Watt heating element heats the gas as it flows through the body of the heater. The temperature of the heater is thermostatically controlled to around desire range. Kanishka Inc. is specialized in the production of circulating heaters and in a wide spectrum of electrical heating solution suitable to meet most of the applications in different industrial sectors. All our products are manufactured under the most stringent quality tests according to the main National and International Standards. Silence features Standard follows IS 4159, IS 302, Available in a broad variety of sheaths, Supplied with electrically isolated sheath, Provide superior internal electrical insulation, Easy to install, Configurable to virtually any shape, Compact in size, Precise and easy control of heat output, Durable, Easy to maintain etc,.
Circulation Heater
2,500 Per EACH
1 NOS. (MOQ)
We offers circulation heaters standard features: pipe body chamber 1. All welded constuction 2. 100 % pressure testing 3. Sizes upto 24 inch diameter 4. Vertical & horizontal models available 5. Either mounting brackets or saddles are available 6. Drained plugs wherever applicable are available 7. Large selection of inlet & outlet sizes available heating elements 1. S.s. 304, s.s. 316, incoly 800 sheathed material available 2. Heavy wall thickness (0.8 mm), large diameter (11mm) spacers 1. Rugged design high temperature alloy material 2. “even flow” configuration standard.
circulation heaters
10,000 Per Piece
circulation heaters
8,500 Per Piece
Oil Circulation Heater
25,000 Per Piece
5 Piece (MOQ)
Circulation Heater
15,000 Per Piece
1 Piece (MOQ)
circulation heaters
15,000 - 150,000 Per Piece
circulation heaters
Get Price Quote
Circulation heaters combine with a tank, insulation, terminal enclosure, mounting brackets, inlet, and outlet connections to form a complete assembly. Circulation heaters, therefore, provide a ready-made means to install electric heating with a minimal amount of time and labor.Circulation heaters are designed to force circulated liquids (air and gases may also be appropriate depending upon the application) over a heating element. Circulation heaters are ideal for either in-line or side-arm operations. By using heating elements, these circulation heaters deliver fast response and even heat distribution.Circulation heaters maintain the high performance capabilities for which all heaters are known. Circulation heaters are rated up to one megawatt , generating watt densities up to 120 W/in2 and sheath temperatures of up to 1600°F (depending upon sheath material).The tanks are insulated with one inch of thermal insulation rated to 750°F to reduce heat loss. A heavy gauge steel jacket protects the entire assembly. A wide range of sheath materials, wattages, vessel sizes and materials, pressure ratings, terminal enclosures and controls are available to the circulation heaters to meet virtually all your circulation heater assembly needs. Applications • Industrial water rinse tanks• Hydraulic oil, crude, asphalt• Lubricating oils at API specified watt densities• Heat Transfer Oil• Paraffin• Caustic cleaners• Nitrogen, hydrogen and other air/gas systems• Superheating steam• Water: • Deionized• Demineralized• Clean• Potable• Process
circulation heaters
Get Price Quote
We are the main supplier of this product.
circulation heaters
Get Price Quote
Achariya’s Photovoltech's solar water heaters comprises of an evacuated tube solar collector and storage water tanks that are connected together; water tank on the top and evacuated tube collector on the bottom. The relies on the natural circulation of water between the collector and the water tank. As water in the vacuum tubes is heated, it rises naturally into the tank, while cool water in the tank flows down to the bottom of the vacuum tubes, causing circulation in the system. Solar water heaters can move water or a heat-transfer fluid through the system without pumps. Our water heaters are simple and safe solution for household, industrial and other commercial use. We manufacture and supply solar water heater, ETC solar water heater, flat plate solar water heaters, and domestic and industrial solar water heaters.
circulation heaters
Get Price Quote
Circulation heaters are the most common types of electric heaters used in the process industries. Tubular elements are welded into a flange to form the heater. One of the most important criteria for designing an immersion heater or a circulation heater is to choose the proper watt density of the heating elements. The liquid, gas, or solid that you are heating must have the correct watt density to ensure that the heater is safe, properly sized, and have a long life. We have experience in a wide variety of applications from water, oils, and steam to chemicals and hydrocarbon gases. We carefully engineer sheath and vessel materials to the application using appropriate watt densities to maximize life, yet minimize footprint. HEATCO has been supplying and have the capability to supply Circulation Heaters with 110 to 440 VAC as well as wattages from 500 watts to 230 KW. If required, HEATCO will configure circulation heaters with voltages and wattages outside these parameters.For more information on special voltage and wattage configurations, contact your HEATCO representative.These are complemented by HEATCO’s experience in custom engineered solutions. Baffles mounted on the heating element bundle enhance and/or modify liquid or gas flow for better heat transfer. For critical sheath temperature and low flow conditions, baffles may be required.Contact your HEATCO representative for details. Features & Benefits At A Glance - Suitable for vertical or horizontal vessel orientation. - Custom designed assemblies available. - Available in a range of standard vessel sizes, from 3" to 14"; vessel sizes to 36" or larger are available on custom order. - Available in a range of standard wattages, from 0.6 kW to 168 kW, depending on heater size selected. - Available in a range of standard voltages, from 120V to 600V. - Flanged inlet and outlet. - Cross flow baffles improve heat transfer when heating viscous fluids and high temperature gases. - Built-in thermocouple mounted in the outlet pipe. - Pressure relief and bleed and drain valves available. - Suitable for mounting on a factory supplied frame custom designed, fully pre-wired control panels available. - Mechanical or electronic high limit controls and temperature controls available. - Multiple units can be supplied as multistage assemblies with either horizontal /vertical orientation.
circulation heaters
Get Price Quote
Self - contained heating units designed for optimum operating efficiency and erformance. Providing trouble free service and application flexibility! All of the heat generated by the elements is immediately transferred to the medium being processed with minimal.
circulation heaters
Get Price Quote
Circulation Heaters also known as Inline Heaters are used where transitional heating is required while maintaining the flow rate . Circulation heaters are better than using external source such as heat exchangers as the losses are minimal because of direct heating. With selection of KW ratings, sizes, terminal enclosures, sheath material, these circulation heaters can be designed for wide range of heating mediums, tube or tank sizes, and temperatures APPLICATIONS Desulphurization Heat up petrochemical mediums used in industrial processes. For Chemical processing applications, ideal for processing fluids and hazardous liquids. Circulation heaters to superheat steam. Lubrication and fuel oil applications Heat up liquid mediums during transport Pasteurizing Industries & Pipeline Heating
Electric Circulation Heater
Get Price Quote
We are one of the most trusted business organizations, presently engaged in offering a technically advanced range of Electric Circulation Heater. These heaters are consist of a tubular flanged immersion heaters that are mounted in an ASME designed heating chamber to heat air, water, nitrogen and chemicals. To attain the maximum satisfaction of the clients, we design Electric Circulation Heater by using bet quality materials and modern technology. We can also offer these heaters to the clients at a nominal price. Features: INC / SS elements for safe heating Easy to use Low power consumption The chamber is equipped with flanged inlet and outlet connections, mounting studs, high temperature insulation and an aluminum jacket.
Circulation Heater
Get Price Quote
We bring forth precision-engineered Circulation Heater in variegated specifications. Developed with utmost precision, our Circulation Heater is widely applauded for high quality, efficiency, reliability and durability. This Heater is easy to install and maintain. It is specifically designed for heating heat transfer fluids, medium and lightweight oils and water in tanks and pressure vessels. Circulation Heater is ideal for applications requiring low to medium wattage requirements. Owing to our high production capacity, we are capable of catering to the bulk orders of Circulation Heater. Safe and timely delivery of the same is assured with our ultramodern transit facilities.
circulation heaters
Get Price Quote
In-Line heaters instantly heat fluids that are passed through the device. Upon exiting the heater, the fluids are consumed for their intended use and are not re-circulated. Inline heaters are usually electric and feature a high-output heat source. They do not provide enough heat to maintain temperature in a closed system, but impart enough heat to a fluid for immediate use. Specifications for inline heaters include heater type, application, fuel or energy source, sleeve or sheath material, insulation options, and element or emitter type. Maximum temperature, maximum air flow, heating capacity, power requirements, and induction heater outputs are also important parameters to consider.Inline Heaters are among the wide range of heaters which are manufactured by us. These consist of a heating coil embedded in ceramic material and energized by electrical energy.
