Chindalia Industrial Products Limited MIDC, Mumbai, Maharashtra

  • Wind Tensioners

    Wind Tensioners

    Request for Price

    Tensioners have quality designed in with standard features that enhance durability and efficiency to get jobs done faster and safer. Quality Means Lower Life-Cycle Costs: Achieves 90% proof load requirement for ISO 898 Grade 10.9 bolts Fully enclose load cell eliminates debris in piston retraction mechanism Auto-engaging geared nut rotator Self-energizing, long life seals Enhanced Usability: Piston Stroke Indicator High pressure swivel coupling (optional on WSS & WSL) 1350 Bar maximum operating pressure Automatic piston retraction mechanism Designed with Safety in Mind: Overstroke prevention for safe operation WDD Series Robust gear drive Auto-engaging Geared Nut Rotator Small Diameter, high load 2-Stage hydraulic load cell Fast application using 1/2" drive   Cycle counter (optional) WSD Series  Robust Gear Drive Auto-engaging Geared Nut Rotator Low Height hydraulic load cell Fast application using 1/2" drive Cycle counter (optional)   WSS & WSL Series  Suitable for ISO Metric threaded, and All-Thread bars. Geared or Manual Nut Rotator Long & Short Stroke models Anti-slip grip surface High pressure swivel coupling (optional)  

    ...more
    Get Best Price
  • Universal Pump Cart

    Universal Pump Cart

    Request for Price

    Mobilize your hydraulic pumps with the PC200. The rugged tubular frame can easily handle pumps weighing up to 200 lbs. With 12" wheels, the cart rolls easily. Just load the pump onto the cart and wheel it right to the job. The universal mounting hole pattern lets you handle a wide variety of Power Team pumps. Used on these pumps:PA60, PA64 and PA554 air/hydraulic pumps; PE55 series, PE183-2 and PE184-2 electric/hydraulic pumps; PE21, PQ60 and PQ120 series “Quiet” pumps; PG55 series gas engine/hydraulic pumps; and pumps with optional 5 and 10-gallon reservoirs; Nos. RP50, RP51, RP101 and RP103.

    ...more
    Get Best Price
  • Universal Pullers

    Universal Pullers

    Request for Price

    Enforcer 100 Series Adjustable jaws mean they always pull on a flat surface. Retaining chain holds jaws in place during positioning. Grip-O-Matic® feature means jaws grip progressively tighter as more pulling force is applied. 100 ton hydraulic cylinder is single-acting, spring return type with a maximum working pressure of 10,000 psi. Lifting bracket allows puller to be lifted if the workpiece center is more than 36" off the floor. Adjusting screw allows operator to move vertical position of the puller. Spring loaded feature means Enforcer 100 will align itself on uneven pulls. Hydraulic pump is a 2-stage, high pressure unit controlled by remote hand switch with 25 foot cord. Tow bar provides puller with plenty of mobility. Pushing adapters have a diameter of 4 1/8" and 2 1/2".

    ...more
    Get Best Price
  • twhc high cycle torque wrench

    twhc high cycle torque wrench

    Request for Price

    Wind Energy Torque Wrench Designed for high cycle life: 2 to 3x more than existing technology Increased reliability: simple drive assembly means less downtime Corrosion resistant material used for use in harsh environments Compact nose radius allows the tool to fit in tighter, hard-to-reach spaces Low weight, high strength design Fast operation, long stroke and optimum flow Multi-direction high flow swivel manifold Fully enclosed drive mechanism for operator safety No-pinch square drive direction switching

    ...more
    Get Best Price
  • Trabon MD Divider Valve

    Trabon MD Divider Valve

    Request for Price

    Available with 2, 3, 4, or 6 outlets Easy to install on new or existing equipment Use our cycle indicator pin models to provide positive assurance of a successful lube event Fluoroelastomer seals for high temperature applications or synthetic lubricants

    Material : Steel

    ...more
    Get Best Price
  • Trabon DC Timer Controllers

    Trabon DC Timer Controllers

    Request for Price

    Solid-state technology, combined with multiple-level protection, ensures dependable performance. Components are coated to protect them against moisture and meld them more solidly into a single unit that resists vibration. Easy interval selection “tunes” the on-board lubrication system’s output to meet changing environmental conditions.  Memory capability assures lube protection The manual run button facilitates start-ups, filling or purging lines and lube points, as well as testing for integrity of the lube distribution lines.  Very simple to install, the DC Timer requires just four mounting screws and connection of five wires

    ...more
    Get Best Price
  • TORQUE WRENCH PUMP

    TORQUE WRENCH PUMP

    230,000 Per Piece

    8 Piece (MOQ)

    Weight : 22.46 Kg

    Voltage : 115 V

    Get Best Price
  • Top Side Tensioner

    Top Side Tensioner

    Request for Price

    SPRING RETURN BOLT TENSIONER Unique quick release bridge adaptation Piston overstroke prevention Piston stroke indication Compatible with MRT Tensioner range Piston/ cylinder misalignment compensation Bolt coverage from 1” to 3 ½” with just 4 tools Designed to fit BS1560 / ANSI B16.5 / API flanges Fully enclosed load cell design eliminates entry of debris into piston retraction mechanism The Spring Return design dramatically increases productivity and safety on the job site when compared to older technology manual return tensioners. Order a load cell and an adaptor kit to make a complete tensioner. Each are sold separately.  

    ...more
    Get Best Price
  • Tire Removing Tool

    Tire Removing Tool

    Request for Price

    TIRE REMOVING TOOL Made to fit into the pry bar pocket Hydraulic pressure does all the unseating. Lightweight and portable. P55 hydraulic hand pump and 9764 hose recommended to be used with BB1600.

    ...more
    Get Best Price
  • Tilter Load Rotors

    Tilter Load Rotors

    Request for Price

    Whenever you have big, heavy components to move or position, nothing helps you get the job done easier and faster than the 6,000 lb. “Tilter.”   For lifting or positioning components, Power Team’s heavy duty lifting slings are just right. The heavy-duty Load-Rotors®, when used with a crane or hoist, greatly reduce time and effort. A self-locking worm and gear set in the Load-Rotor® head permits rapid angle adjustment of the component being handled. * Note: Not to be used for overhead lifting.

    ...more
    Get Best Price
  • Thrif-T Luber Metering Device

    Thrif-T Luber Metering Device

    Request for Price

    Full range of metering amounts for lubricating almost any machine Available in three types and ten flow ranges to meet lube requirements Quality sintered bronze filters won’t shred or clog like felt filters

    ...more
    Get Best Price
  • Thread Chasers tool

    Thread Chasers tool

    Request for Price

    Restore damaged threads on shafts, housings, cages, etc., for re-assembly of matching parts. Eliminates need for thread-cutting equipment. Will not harm threads. V-pads and dies can be replaced. Cap. 1 1/4" to 5" O.D.    

    ...more
    Get Best Price
  • Tensioner Pump

    Tensioner Pump

    Request for Price

    1500 BAR Electric pump Light weight (45.5 LBS/ 20.6 KG without oil) and compact for portability and working in small spaces. Low Current draw allows for remote location use Heavy duty drive train provides durability for rapid and repetitive cycling applications. Quality Means Lower Life-Cycle Costs: Over 100,000 cycles Continuous Duty (even at 50deg. C/ 122 deg.F ambient) Proven design: proven reliability Enhanced Usability: Light weight and portable: 45.5lbs/20.6kg (without oil)  Removable Control Pendant (15ft/5m) cord length Removable 4" Calibration capable gauge Universal Motor for reduced voltage applications (up to -20% nominal voltage) Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Maximum Oil Capacity: (vented reservoir) 1.0 Gallons / 3.8 L (to fill line) 0.9 Gallons / 3.4 L (useable) Operating Environment:Temperature: -13°F to 122°F / -25°C to +50°C (If temperatures are at extremes of the operating range, it is recommended to use hydraulic oils that are rated for those temperatures. Refer to service manuals and cooling options) Sound Level:82 – 86 dB A Pressure:0 – 21,750 psi (0 – 1500 bar) Typical Flow:168 cu-in/min – 8 cu-in/min 2.7 L/min – 0.13 L/min Power:0.5 HP Universal Motor (115 volt – 50/60 Hz) 11 amps (230 volt – 50/60 Hz) 5.5 amps 

    ...more
    Get Best Price
  • Telescopic Boom Lifts

    Telescopic Boom Lifts

    1,500,000 - 9,000,000 Per PER UNIT

    Optional Configuration Optional: (All “option” configure will be charged per quotation) Description Specification Platform Size (L*W*H) 1.83*0.76*1.1M (6ft *2.5ft *3.6ft) Engine Perkins 1104D Tire Foam Operator protection Anti-crash device

    ...more
    Get Best Price
  • Telescopic Boom Lift

    Telescopic Boom Lift

    Request for Price

    Type : Boom Lifts

    Application : Disaster Use

    Color : Blue, Brown, Grey, Light White, Off-White, Red, White

    Condition : New, Used

    Automatic Grade : Manual, Semi Automatic

    Power : 0-3Hp, 3-6Hp, 6-9Hp, 9-12Hp

    Driven Type : Hydraulic, Mechanical

    Warranty : 1yrs, 2yrs

    Loading Capacity : 100-1000kg, 1000-2000kg, 2000-3000kg, 3000-4000kg, 4000-5000kg

    ...more
    Get Best Price
  • subsea tensioner

    subsea tensioner

    Request for Price

    QUICK REACTION SUBSEA TENSIONOur Subsea bolt tensioner incorporating the quick reaction nut feature reduces diver fatique, improving diver safety and productivity.  Visible piston stroke indication Piston/cylinder misalignment compensation Anti-slip cylinder surface for improved handling Low friction seals Anti-corrosion coating Bolt coverage from 3/4" to 3 1/2" Designed to fit BS1560/ANSI B16.5/ API flanges, as well as most compact flange designs

    ...more
    Get Best Price
  • Subplates Pump Accessories

    Subplates Pump Accessories

    Request for Price

    For remote mounting of control valves. Subplates convert pump mounted valves to remote mounted valves quickly and easily. When fitted between pump cover plate valve mounting flange and control valve, provides a separate 3/8" NPTF female port, open to “return” regardless of position of valve. Also provides a separate 3/8" NPTF female pressure port. This subplate can be useful when you desire to use one pump with a deckmounted control valve, plus a separate remote-mounted valve to control another function.

    ...more
    Get Best Price
  • stressing jack

    stressing jack

    Request for Price

    Stressing jack Ideally suited for work on slab-on-grade where dirt, heat and high volume use take their toll. Available in single or double-acting models. Standard single-acting units have a 10" stroke. Other stroke lengths are available on special order. Service repair is simple; components are long lasting and easily replaced. 3" detachable seater nose assembly easily replaced with optional 6" nose assembly. The jack of choice for highrise and elevated work, thanks to fast return time and light weight.

    ...more
    Get Best Price
  • Step Plate Adapter Sets

    Step Plate Adapter Sets

    Request for Price

    Power Team step plate adapters are necessary for pulling and installing bearings, gears, or other parts on hollow shafts or housings. Puller screw forces against step plate adapter, as shown at right. May be used with Power Team jaw-type pullers, Push-Pullers® and shop presses. CAUTION: All the items shown may not withstand the full tonnage of the pullers they may be used with.

    ...more
    Get Best Price
  • Standard Couplers

    Standard Couplers

    Request for Price

    CYLINDER AND HOSE COUPLERS   Designed for use up to 10,000 psi with hydraulic jacks, cylinders, etc. They are the threaded union type for interchanging cylinders in seconds. Each half is valved with a precision ball for a tight shutoff when disconnected. These couplers also permit the separation of cylinders or hose from pump when at 0 psi with minimal oil loss. NO-SPILL, PUSH-TO-CONNECT HYDRAULIC HOSE COUPLERS Designed to permit high oil flow, the no-spill, push-to-connect couplers with locking collar and flush face design are for high pressure applications. The flush-face concept makes it easy to clean both coupler ends before connecting. Our unique push-to-connect, “dry-break” design eliminates oil spillage. The locking collar makes accidental disconnects a thing of the past. For 10,000 psi operation. HYDRAULIC COUPLER DUST CAP Dust cap fits either male or female half couplers.  

    ...more
    Get Best Price
  • Standard Bottle Jack

    Standard Bottle Jack

    Request for Price

    INDUSTRIAL LIFTING AND PUSHING APPLICATIONS. Choose from this complete line of premium quality, standard bottle jacks. Ideal for use in any number of industrial lifting and pushing applications. The 9110B, 9015B, 9022B and 9033B feature a beveled base which allows the jack to “follow” the load, reducing the chance of dangerous side-loading. Many jacks feature screw extensions Some jacks can be used in the vertical, angled or horizontal positions. Serrated or contoured saddles help stabilize the load for a safer lift. All jacks meet ASME B30.1 standards and carry the Power Team Marathon Lifetime Warranty. 110-ton jack features dual pumps for time-saving two-speed operation.                                                                                                                                                                                                                                                                                                                                                                             

    ...more
    Get Best Price
  • Square Drive Torque Wrench

    Square Drive Torque Wrench

    Request for Price

    SQUARE DRIVE TORQUE WRENCHES The TWSD Series Square Drive Torque Wrenches are designed with the following:  Low Weight, High Strength Design Superior Torsional Strength Fast Operation Cycle Fine Tooth Pawl Floating Piston Design Internal Swivel Manifold Relief Rigid Steel Body Construction Compact Frame Size Push Button Reversal of Square Drive Corrosion Resistant Finish 360° Reaction Arm Push to Click Reaction Arms Multi-Axis High Flow Swivel Manifold Simple Design Consistent Torque Output Fully Enclosed Drive Mechanism Accurate Torque Output Marathon Lifetime Warranty

    ...more
    Get Best Price
  • Spreader Bolting tools

    Spreader Bolting tools

    Request for Price

    • Use to lift machines or as a clamp; spread concrete forms or rebar or preform straightening jobs. • Conforms to ASME B30.1 standard. • High strength alloy steel forged upper and lower jaws on HS2000. Jaws are spring return; retract automatically when pressure is released. No. HS2000- 1ton capacity spreader. Full 2,000 lbs. capacity at 10,000 psi with 4" spread. Can be "dead-ended" at 4" spread under full load. Needs only 9/16" clearance to engage jaws. No. HS3000- 1 1/2 ton capacity spreader. Full 3,000 lb. capacity at 10,000 psi with 11 1/2 spread. Greater than competitive units. Needs only 1 1/4" clearance to engage jaws. Can be "dead-ended" at 11 1/2" spread at full load.   Tested to conform to ASME B30.1 standard

    ...more
    Get Best Price

Services

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers
  • Year of Establishment 2003
  • No. of Employees Below 20
  • Annual Turnover Rs. 2.5 to 5 Crore Approx.

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
We have the pleasure in introducing ourselves as a very reputed and trusted Trade House for all types’ of Hydraulic & Pneumatic Equipments, Aerial Work Platforms and Lubrication Equipments. We are proud in boasting our most sophisticated range of High force business tools and system which is used in production, maintenance and construction applications like lifting, pushing, pulling, bending, spreading, cutting, lowering, pressing, punching, and lubricating etc. We use most advanced and state of art tools and system and delivering the best results to our client.
We, Chindalia Industrial Products Limited, have our headquarters at Navi Mumbai, and are one of the India's leading suppliers of High Quality Hydraulic Products to different core and heavy sectors of India which include Steel, Mining, Petroleum,
Power to name a few. We are ISO9001-2008 certified company. At Chindalia Industrial products ltd, we never compromise in our quality and hence it has been our constant Endeavour to provide our valued customers with the best products of the world.
We always try to expand out horizon by a constant process called evolution. We keep adding latest products and upgrade our existing range of products. Not only that but we also keep ourselves ready for the challenges by adopting the latest technical knowledge.
1) SPX - POWERTEAM (USA) –It is the oldest name in the field of Hydraulic Lifting,
Pulling &Bolting Tools.POWER TEAM, a brand name of SPX Hydraulic Technologies, U.S.A., is a globalcompany with sales and marketing offices spread worldwide.
The Hydraulic Jacks, Hydraulic Cylinders, Hydraulic Pullers, Torque Wrenches&Tensioning Tools engineered from them are considered to be the Most Reliable and Best in the business. We are the Authorized Distributor for “SPX POWER TEAM”,the Worldwide Leaders in Hydraulic Tools & Equipments.
2) MEC (USA) – a giant in the field of Aerial Work Platforms like Scissor Lifts, Sigma lifts, Boom Lifts&Telehandlers. These are available in different platform heightslike 60ft., 43ft., 32 ft., 26 ft., 22ft.,19 ft., 15 ft. All MEC Scissor Lifts complywith world's toughest safety standards like ANSI, CE and CSA.
3) GRACO (USA)– the oldest and biggest name in the field of Industrial LubricationEquipments and Systems. Graco has its wings spread across the globe to provide you with the best of products and service wherever you live. “Graco,USA” deals in complete range of Automatic Centralized Lubrication Equipments ranging from Electric Pumps, Pneumatic Pumps, Manual Pumps, Mechanical Pumps, Hydraulic Pumps with the following metering devices like Single Point Lubricators, Single Line Resistive Metering Devices, Single line parallel metering devices, Progressive Metering Devices. Our products comply with highest standards like CE, ETL, IP69K, UL 73, CSA, ATEX approvals, IIC approvals.
4) ALIAXIS - GLYNWED (ITALY) –the biggest name with all types of Thermo Plastics viz. CPVC, UPVC, PPH, PVDF & ABS PIPES, FITTINGS, VALVES & ACCESSORIES to cater the service in industries of different segments across the globe. They also the world leaders in Pipes & Fittings of all sizes & pressure rating with Socket Fusion/Butt Fusion systems for PP-H/PVDF Piping & Solvent Welding.2 Way, 3 Way Ball valves, Butterfly Valves, Diaphragm Valves, Check Valves, Ball Check Valves, Strainers, etc – Manual/Pneumatic & Electrical Operated.
We have both DIN as well as ASTM Standards.
5) LITEMAN (AUSTRALIA) –Available in 2000w, 3000w, Anti-Glare Balloon, Floodlit or as an interchangeable combo. Dynamite Lights are quick and simple to operate. The most preferred choice for people looking for a portable lighting solution with a small footprint.These units come standard with individual breakers and RCD protection, power point lead ready for plug and play, pneumatic wheels, with steering, foot park brake, forklift pockets, centre point lifting, quick drop stabilizer legs and 4 stage hand winch mast to 6.0 meters.
Read More »

Contact Information

Chindalia Industrial Products Limited

  • Mr. Rounak Chindalia
  • C-23, Punit Industrial Premises Co-op Society Limited Plot 11a-11d, Midc, Ttc Area, Thane Belapur Road, Turbhe, Navi Mumbai - 400 705., Maharashtra
top