Conpro Chemicals Private Ltd. Sahibabad, Ghaziabad, Uttar Pradesh

We offer Water Thinnable Epoxy Coating. Description: conpro ep-8 is a two component, epoxy based waterproofing compound. After mixing both the components , it can be thinned down with water. In cured condition, it is hard, tough, abrasion resistant material. It is resistant to wide range of chemicals including many acids, alkalies, minerals oils, solvents etc. It also has excellent resistance to water .one of the major advantage of conpro ep-8 over solvent based epoxy is that it can be applied on damp surface also. Being free from solvents , it does not pose any health hazard to the applicator. advantage:water thinnable.non-toxiccan be applied over damp surfaces. resistance to the growth of fungus and micro-organism. scope of use: conpro ep-8 is a coating system recommended for use over cement bound surfaces like concrete, screed and plaster specially water storage tanks , toilets , kitchens walls , breweries , food processing industries.

We are offering Water proofing, Bonding Agent, Description : Conpro SB-4 is a special styrene butadiene copolymer emulsion based additive for concrete and mortar to increase adhesion strength, water resistance, chemical resistance and abrasion resistance. Uses : Conpro SB-4 can be used as additive for:Bonding of old concrete to new concrete Water proofing coatingPlaster work on difficult surfaces Levelling & repair mortar Jointing & bonding of common masonary works Crack filling of roofs, terraces, walls etc. In lime & cement paints to improve bonding and water resistance Cement mortar for improved chemical resistance. Advantages : Conpro SB-4 has following advantages Increases the bond strength of cementitious mortar & concrete by more than 5 times.Decreases water permeability of cementitious mortar, concrete & coatings.Improves chemical resistance Increases flexural, tensile strength and elasticity.

We offer Wall Epoxy Coating. Description: conpro ep-1-1 is a solvent free, pigmented, two component system consisting of epoxy resin and specially formulated hardener. Ln cured condition, it is hard, tough, abrasion resistant material it is resistant to wide range of chemicals including many acids, alkalies, minerals oils, solvents etc. It also has excellent resistance to water and many chemicals used for food processing. scope of use: conpro ep-1-1 is a coating system recommended for use over vertical as well as horizontal ms surfaces like storage tanks, pipes, methane upload reactors etc. major applications of conpro ep-1-1 is in chemical industries, sugar industries, distilleries.

We offer Solvent Free Epoxy Primer and Epoxy Coating. Description: conpro ep-2 is a low viscosity, epoxy based, solvent free two component primer and coating system. In cured condition, conpro ep-2 is a hard, tough and abrasion resistant material. It is resistant to a wide range of chemicals including many acids, alkalies, mineral oils, solvents etc. It also has excellent resistance to water. Due to its low viscosity it is suitable for crack filling. Scope of use: conpro ep-2 is used: as primer coat on cement bound surfaces and metals. for providing anti - skid finishes and sealings. in levelling coats. in epoxy clear finish coats.

Description: Conpro EP-1 is a solvent free, pigmented, two component system consisting of liquid epoxy resins and specially formulated hardener. In cured condition, Conpro EP-1 is a hard, tough and abrasion resistant epoxy flooring. It is resistant to a wide range of chemicals including many acids (inorganic), alkalies; mineral oils, solvents etc. It also has excellent resistance to water. Scope of use: Conpro EP-1 is a coating system recommended for cement bound surfaces like concrete, screed and plaster. It can also be used over iron and steel. Major applications of Conpro EP-1 are as floor coatings in chemical, mechanical or pharmaceutical industries, computer rooms, chemical laboratories etc.

We offer Silicone Based Water Repellant Coating. Description conpro wr is silicone based, single component , colourless clear liquid coating that penetrates into open pores into mineral substrates and make it water repellant.it prevent water penetration , has good permeability to water vapour thus allow the masonary surface to breathe naturally. scope of use conpro wr is used to protect vertical exterior surfaces like concrete, natural stones, artificial stones, clay bricks, cementitious plaster, cement paint coated surfaces etc.against driving rain and frost with improvement in self cleaning properties.

We offer Self Level Epoxy Topping. Description: conpro ep sl 3 is a solvent free, pigmented three component system consisiting of liquid epoxy resin , specially formulated hardener and high quality fillers.in cured condition, it is hard, tough abrasion resistant material.it is resistant to wide range of chemicals including acids, alkalies, mineral oils, solvents etc. It also has excellent resistance to water. scope of use:it is a self levelling system recommended over cement bound surfaces like concrete, screed and industrial tremix floors.major applications are as floor toppings in automobile industries, home appliance industries, hospitals,pharmaceutical industries, dairy industries,agrochemical industries,chemical laboratories etc.

we offer Self Level Epoxy Topping. Description: conpro ep sl 2 is a solvent free, pigmented three component system consisiting of liquid epoxy resin , specially formulated hardener and high quality fillers.in cured condition, it is hard, tough abrasion resistant material.it is resistant to wide range of chemicals including acids, alkalies, mineral oils, solvents etc. It also has excellent resistance to water. scope of use:it is a self levelling system recommended over cement bound surfaces like concrete, screed and industrial tremix floors.major applications are as floor toppings in automobile industries, home appliance industries, hospitals,pharmaceutical industries, dairy industries,agrochemical industries,chemical laboratories etc.

We offer Self Level Epoxy Topping. Description: conpro ep sl 1 is a solvent free, pigmented three component system consisiting of liquid epoxy resin , specially formulated hardener and high quality fillers.in cured condition, it is hard, tough abrasion resistant material.it is resistant to wide range of chemicals including acids, alkalies, mineral oils, solvents etc. It also has excellent resistance to water. scope of use:it is a self levelling system recommended over cement bound surfaces like concrete, screed and industrial tremix floors.major applications are as floor toppings in automobile industries, home appliance industries, hospitals, pharmaceutical industries, dairy industries, agrochemical industries, chemical laboratories etc.

We are offering Floor Hardner , Description CONPRO FH-1 is a cementitious non-metalic abrasion resistant floor hardener ideally suited for all industrial floors subject to heavy traffic. AdvantagesHigh abrasion resistance.Very high compressive strength.Monolithic.Oil and grease resistant.Easy to apply.Rust free. Shrinkage and crack free.Method of Application For laying of CONPRO FH-1 over base concrete, the following procedure is recommended: Alllow bleeding water on the top of base concrete to evaporate.Ensure that base concrete is hard enough so that light foot traffic movement does not leave an impression of more than 3 mm depth.Spread CONPRO FH-1 uniformly in 3 stages.After spreading one-third of the total CONPRO FH-1 to be used, level the surface with a wooden float.Similarly, spread the rest of the CONPRO FH-1 in 2 stages and level the surface again.Allow the surface to cure as per conventional cement curing methodology.

We are offering Adhesive Dry Powder, Description CONPRO SP-1 is a highly effective and economical superplasticizer based on naphthalene sulphonate formaldehyde condensate used for producing high strength quality concrete which permits early removal of shuttering for speedy construction. CONPRO SP-1 complies to ASTM-C-494-86, Type F & IS 9103-1979. Advantages CONPRO SP-1 provides following advantages:Higher strength without effecting workability.Higher workability without increase in water content.Early removal of shuttering for speedy construction.High early and ultimate strength. Cement saving.Chloride free.Reduced bleeding and segregation.Low W/C results in increase in density and impermeability thus improving durability of concrete.PrecautionsAvoid prolonged skin contact.Avoid splashes in eyes or mouth. Terrazo tiles Wash with plenty of water, if skin or eye contact occurs. Contact physician if redness or irritation persists.

We offer Integral Waterproofing Admixture. Description: conpro iw-302 is normal setting, integral cement waterproofing compound that makes concrete resist water through hydrostatic pressure or capillary action. conpro iw -302 complies with is 2645-1975. uses: conpro iw-302 is used for waterproofing of concrete and mortar in : roofs, terraces, balconies water tanks, swimming pools, silos etc.basements, toilets areas exposed to water/moisture etc. Advantages: conpro iw- 302 has following advantages: reduces permeability of concrete to a large extent.arrests saltpetre/efflorescence action prevents bleeding and segregation.allows normal breathing of concrete/mortar.improves workability of concrete.reduces w/c ratio. prevents corrosion of steel reinforcement. chloride free.

We offer Highly Flexible Two Component Waterproof Coating System. Description: Conpro WP -2 is cement based two component modified acrylic copolymer emulsion, Conpro WP -2 provide waterproofing coating, capable of resisting ground and back water seepage at negative pressure. High flexibility enable it to bridge hairline cracks. Uses : Conpro WP-2 is used for External and internal water proofing of structures like basements, terraces, balconies, swimming pools, bathrooms, storage water tanks, etc.Bridging of cracksWaterproofing repair of all the above structures. Advantages: Conpro WP-2 provides the following benefits: Very easy to apply (By brush or roller) Excellent adhesion with cement bound surface (plaster, concrete etc.)Vapour permeable (Breathing active)Non toxicCan withstand pressure equivalent to 30m. WaterheadGood abrasion resistanceCarbonation resistanceUV resistant Highly flexible.

Description Conpro TA-1 is a polymer modified cement based dry power. This construction chemical is mixed with water to make workable mortar which is highly suitable for fixing of Tiles over cementitious surfaces. Advantages Conpro TA-1 provides following benefitsFlexible to accommodate normal floor movement and temperature variations.High bond strength. Highly workable, ensures speedy work.Application Conpro TA-1 is used for fixing of all types of floor and wall tiles viz Glazed tilesMosaic tiles Terrazo tiles Brick, marble and granite tiles It can be used for tiles/stones/granite cladding on walls and columns.

We are offering Rubber Coaltar Coating, Description : Conpro RC is a high build, ready to use, anti-corrosive and water proofing coating. It is based on Coaltar and Synthetic rubber. Conpro RC cures to a tough elastic film which is water proof and has good resistance to many corrosive chemicals. It has excellent bond with concrete, mild steel and most of other building materials. Scope of Use Conpro RC is used as protective coating for mild steel and pipelines.Conpro RC highly suitable for water proofing of basements, water tanks, swimming pools.Conpro RC is used for water proofing of roofs, terraces, chajjas, parapet walls, sunken slabs etc.

We offer High Build Polyurethane Coating. Description: conpro pu-1 is a polyurethane based , high build, ready to use, anti-corrosive and water proofing coating. Conpro pu-1 cures to a tough elastic film which is water proof and has good resistance to many corrosive chemicals. It has excellent bond with concrete, asbestos, mild steel and most of other building materials. Scope of use: conpro pu-1 is used as protective coating for mild steel and pipelines.conpro pu-1 highly suitable for water proofing of concrete roofs, asbestos roofs, basements, water tanks, swimming pools..conpro pu-1 is used for water proofing of terraces, chajjas, parapet walls, sunken slabs etc.applicationseal all the crevices with silicone sealant, or sealer made by mixing chalk-mitti with conpro pu-1.apply first coat of conpro pu-1 over prepared and primed substrate by brush, roller or airless spray and allow it to dry for 8 hours.apply second coat of conpro pu-1 perpendicular to first coat.thinner (xylene) upto 5% may be used for finish coat, if required.

We are offering Epoxy Coaltar Coating, Description : CONPRO CT-3 is a high build, two component, anticorrosive and water proofing coating. It is based on Coaltar, Epoxy resin and specially formulated hardner CONPRO CT-3 cures to a tough elastic film which is water proof and has good resistance to many corrosive chemicals. It has excellent bond with concrete, mild steel and most of other building materials. Scope of Use CONPRO CT-3 is used as protective coating for mild steel and RCC substrates subjected to water immersion, exposed to marine environment or sub soil condition.CONPRO CT-3 highly suitable for water proofing of roofs & basement.CONPRO CT-3 is ideal for protection of under water or sub-soil structures and pipeline, waste water and sewage treatment plants. Application Apply mixed CONPRO CT-3 over preapared substrate by brash, roller or airless spray. Second coat should be applied after minimum 12 hours.

We offer High Build Epoxy Based Chemical Resistant Coating. Description: conpro ep-21 is a solvent free, pigmented two component, epoxy based coating specially for steel and concrete. In cured condition, it is hard, tough, abrasion resistant material. B is resistant to wide range of chemicals including many acids, alkalies, minerals oils, solvents etc. It also has excellent resistance to water and many chemicals used in sugar, breweries, distilleries, fertilizer, and chemical industries. Scope of use:conpro ep-21 is a coating system recommended over iron and steel surfaces, and cement bound surfaces like concrete, screed and plaster.major applicationa of conpro ep-21 includes coating over containers, reactors in which chemicals of recommended concerrtratioti is stored. It may also be used tor coating structures.

We offer Food Grade Chemical Resistant Epoxy Coating. Description: conpro ep-7 is a solvent free, pigmented, two component, epoxy based coating specially formulated for substrates coming in contact with food and edible-products. In cured condition, it is hard, tough, abrasion resistant material. It is resistant to wide range of chemicals including many acids, alkalies, minerals oils, solvents etc. It also has excellent resistance to water and many chemicals used for food processing. scope of use: conpro ep-7 is a coating system recommended for use over cement bound surfaces like concrete, screed and plaster. It can also be applied over iron and steel. major applications of conpro ep- 7 are as floor coatings in hospitals, pharmaceutical industries, dairy industries, agrochemical industries, clean rooms etc. In fact where ever it is important to maintain highest standard of hygiene.

We are offering Insulating Material, Description CONPRO RI construction chemical is specially graded exfoliated Vermiculite used as thermal insulation material in building industries for roofs, walls and light weight filling at reasonable cost. Vermiculite is the mineralogical name given to hydrated laminar magnesium aluminium silicate CONPRO RI is under IS code 10555 Advantages CONPRO RI has following advantages: Very low density.High thermal insulation.Chemically neutral.Natural, non toxic, ecologically friendly and long life material.Easy and fast application.Resistant to heat and moisture.Method of ApplicationEnsure the surface is clean, free from separating agents like oil, dust, grease, dust and loose particles. Apply one coat of cement slurry to improve adhesion. Apply the mixed mortar on roof or wall without compression as per recommended thickness.Allow the applied material to set and dry for 3 - 4 days. Since it is cementitious material, water later on.On top of insulation apply any terracing material as per requirement.

We are engaged into manufacturing, exporting and supplying of finest epoxy chemicals which are immensely preferred in construction, flooring etc. for Self-levellings. We specialize in Epoxy Coatings, Epoxy Screeds, Epoxy Primers and Epoxy Grouts. The unmatched quality and impressive performance of our product made us one of the successful epoxy chemicals manufacturers and epoxy coating chemicals suppliers in the market. Our epoxy chemicals are very robust and can bear most of mechanical shocks calmly. Lastly, these chemicals are very affordable.