Biogas Plants Dealers in Delhi (59 products available)

• Power Source: Electric
• Voltage: 220 V
• Capacity: Approx 10 Litre
• Material: Glass
• Brand: Dutt Instrumentations

• Material: FRP
• Shape: Round
• Application: Biogas Storage Tank
• Weight: 50-100kg
• Color: Black
• Finishing: Polished

use for biogas lamp indoor light.

• Type: Domestic Biogas Plant
• Application: Industry Fuel
• Condition: New
• Automatic Grade: Automatic
• Driven Type: Gas
• Detected gas: Methane

SSGLA has developed technology to enrich biogas to Biomethane that can be used to replace natural gas and LPG in many applications due to its lower cost and non-polluting nature. Our technology also allows for the recovery of Carbon dioxide form the process. Thus recovered Carbon Dioxide can be purified to a high grade and may be used for another chemical processes or sold directly in the market, providing further value addition. Hydrogen Sulphide- a pollutant ,is minimized to untraceable amounts so as to protect human and plant life from its effects. The spent biomass makes excellent fertilizer and can be further enriched. Biogas collection and upgradation technology depends on the type of biomass, ambient temperature and processses employed. As an SSGLA tradition and firm belief, we always tailor-make our gas processed, taking in to account the size of stream, objective of biogas upgradation, cost benefit analysis and feasibility of upgradation process thus providing the right balance of automation and affordability. Our quality, however, we refuse to compromise with we guarantee a stress free running of all our gas processes and our Biomethane process is no different. Welcome to a new world of green energy!

• Waste Input: 500-1000 kg
• Plant Capacity: 25 - 5000 cubic meter
• Plant Design: Standard and Customized

The company offers high quality Membrane Bio Reactor that is basically used for wastewater treatment. This Membrane Bio Reactor has a high pollutants removal rate & renders steady operation. We are even a single supplier in India that provides high quality membrane bio-reactor at low cost. Membrane Bio Reactor (MBR) technique is a new method for wastewater treatment that integrates membrane separation and biotechnology, rejects activated sludge and macromolecular organic matter in aerobic tank or MBR tank with membrane separation plant, thus saving the use of secondary sedimentation tank. Consequently, the concentration of activated sludge rises greatly, the HRT and the SRT could be controlled separately, and difficult degraded matters are constantly degraded and reacting in reactor. Therefore, compared to traditional biological treatment methods, MBR technique greatly strengthens the function of the bioreactor with the using of membrane separation, it has advantages as follows: high biochemical efficiency, strong load impact resistance, stable effluent quality, smaller foot print, long period of sludge discharging, easily automatic control, etc. MBR is a high effective combination with membrane separation and biological treatment instead of secondary sedimentation tank of activated sludge process to separate.Features : High pollutants removal rate, strong capacity of sludge bulking resistant, steady treated effluent quality, suspend solid (ss) in effluent near to zero. Accomplish complete separation between hydraulic retention time (hrt) and sludge retention time (srt). Operation is simple and flexible. Stop loss of activate organism by membrane mechanical interception. Keep high concentration of activated sludge in bioreactor so that enhance volume load largely and reduce sludge load. Membrane reactor integrates traditional aeration tank and secondary sedimentation tank into one system and displaces all equipment after secondary sedimentation tank which in conventional process. Largely reduce foot print, and save investment of civil works. Due to the function of membrane interception, srt is prolonged, this process create good growing environment for microorganism (example: nitrobacteria) which grow slowly. It can enhance system nitrification ability. It will enhance efficiency of big molecular organism degradation. Lead them to degrade completely. Due to very long srt, membrane bioreactor can be role of sludge nitrification tank so that it’s remarkable to reduce sludge production, decrease disposal cost of sludge. Activated sludge in bioreactor will not be lost during treated water production. Concentration of sludge will be along with organism concentration change to change, and reach a dynamic balance. So, the treated water quality is steady and the system has strong impact load tolerant capability. The reactor special structure causes wastewater mix uniformly, so activated sludge has good dispersibility, largely increase sludge specific surface area. This is another reason of our system has good efficiency. This is also the characteristic which conventional biological methods cannot compare with it because conventional biological methods will easily cause larger bacteria & colloid bulk in the wastewater. Material polypropylene (PP) We have two types of MBR system to suit different client’s requirement. First, is a small capacity compact steel tank MBR system for private parties, such as hotel, villa, car wash workshop, house to treat shower & bath grey water, domestic wastewater, car wash wastewater, etc. The treated effluent can be used to garden, landscape, car wash, toilet flush, irrigation, other recycling utilization. This system can be designed to fit international container size, ship easily. We also accept to supply our full design to guide you build RCC STEEL FRP tank in your place. Below photo is system RCC MBR for hotel wastewater treatment. Another is big capacity MBR system for government tenders; RCC tank is in client’s scope as per our drawing. For equipment in system, clients also can follow specification we submit to purchase locally, we will supply complete technical support, if necessary we can send engineer to give training at your place. hydrophilic before using the membrane, it should be treated by the hydrophilic process, the method is as follows first keep it in 95% industrial alcohol for about 2 minutes (attention: avoid the water collecting tubes of both sides be immersed in the alcohol), then use clean water to immerse and flush it for 13 minutes. If the membrane is not used immediately after the process, it should be packed hermetically, to keep the membrane fiber wet. Fouling prevents and membrane cleaning micropore air diffuser is recommended. The bubbles and stream produced from aeration can shake membrane fiber and scour it. Meanwhile using intermittent operation process, self-suction pump works for 13 minutes and stops for 2 minutes, to prevent membrane clogging and guarantee the long stable running. Before running the membrane, we should make sure that microorganisms in the biochemical tank grow activated and low stickiness. During operating, keep flow constant, strictly prohibit product water flow is non-stable. The suction negative pressure could be read out through electrical-touched pressure gauge, the operating negative pressure of membrane is -0.01 ~ -0.03mpa; if condition permitted, draw off water using a siphon type, and keep water level difference between biochemical tank and treated water tank is 3.0~4.0m, thus membrane slice could not be polluted easily and the using period could be longer. When the operating negative pressure is over 0.05mpa, membrane slice should be cleaned. Take off the membrane slice from the frame, wash its surface with clean water, clean away the activated sludge stuck on the surface; and then immerse the membrane slice in 3-5% naoh for over 2 hours (overnight is better), clean away organic matters and colloids on the surface, again wash the membrane slice with clean water, then the flux will be recovered. If wastewater contains high content of calcium, magnesium ion and metal hydroxid, after naoh solution cleaning, should immerse membrane in 2-3% hcl solution for 1-2 hours (better shake membrane in order to make Hcl and pollutants mix and react fully). And then wash it with clean water. In order to prevent corrosion, demount all metallic connection fitting before acid cleaning. If effect of above two ways is not ideal, could immerse membrane in 0.5% naclo for 0.5-1 hour, eliminate all organism on the surface, then washed by clean water. But, do not immerse membrane for so long time to avoid damage from oxidation, and it will reduce strength. During cleaning process, handlers are required to be careful to avoid fiber damage. Meanwhile, keep surface of membrane wet, prevent freezing and dry which will affect flux even no effluent. Note : Keep membrane wet at any time, because if dry, it will cause irreversible damage. Whatever naoh solid or solution and naclo, HCL solution all have high corrosiveness. Handlers should put on prevention things, avoid touching them directly. Naclo solution has strong oxidation, it will affect membrane life, only use it if acid and alkaline methods are not ideal Others make sure hydrophilic membrane and equipment be kept in 5-40 during the process of transporting and storing to avoid damaging the membrane. Prevent the equipment from long-time sunshine to avoid plastic damage by ultraviolet ray. If the site temperature is below 0, we suggest conducting hydrophilization process on site, if not use it immediately, should keep the membrane wet by sealing up and keeping warm; prevent freezing during hydrophilization and cleaning process.

We are known as the efficient manufacturer who are also dealing in supplying quality range of three br long tr knob. The three br long tr knobs are manufactured using the ultimate materials and are processed as per the standards. The professional experts manufacture these products efficiently. These three br long tr knobs are available in different specifications, so the clients can choose the best and appropriate option of their choice.

• Country of Origin: India
• Plant Design: Modular
• Automation Grade: Automatic
• Product Name: PSA based Biogas purification system
• Production Capacity: Up to 250 Nm3 per hour (customisable)
• Input: Raw biogas manufactured from Biomass
• Material of Construction: Mild steel
• Feedstock: Biogas / Iandfill gas
• Biogas / Iandfill gas: 500 to 5000 Nm3/Hr.
• CH4 recovery rate: up to 98%
• Pressure: 4 – 7 bar (abs)
• Brand Name: UNISSI

We are known as one of the eminent Manufacturers of Biogas Balloons. These Biogas Balloons are used to fill biogas that is used for various industrial applications. We use the finest quality raw material and advance technology to fabricate these Biogas Balloons. Our clients can obtain these Biogas Balloons at competitive prices from us. Why Our Biogas Balloon? Precision-engineeredEco-FriendlyQuality testedCompetitive price

• Range: 5 KVA to 125 KVA.

We are primarily engaged in the manufacturing, exporting, and supplying of Biomass Gas Generator all across the globe. The Biomass Gas Generator runs on 100% Producer Gas or Biomass including wood and husk. Our Biomass Gas Generator is provided at the most competitive prices. The raw material used are rice husk, wheat husk, wood bricks, wood saw and other dried agricultural waste, The heat coming out from the exhaust is carbon less and is around 400-650 degree Celsius, which can be easily used for indirect heating purposes and can also add to the savings.

• Plant Design: Customized
• Automatic Grade: Automatic
• Voltage: 240-380 V
• Body Material: Stainless Steel
• Gas Requirements: Raw Biogas from any source
• Brand Name: GBES
• Material: Stainless Steel
• Air Volume: Biogas 200 to 2000m3/hr

Sturdy construction, Inner chamber made of 16gauge stainless steel, outer shell & steam jacket is also made from thick Stainless Steel. The boiler & outer shell is provided with air insulation. Lid is made of Stainless Steel & is tightened by screws& is provided with best quality joint less neoprene gasket to avoid any risk & trouble free operation, with port for temperature pH indication. Provided with stirrer along with heavy duty crompton motor. Fitted with water level indicator to indicate the water level inside the boiler. With pressure gauge, steam release cock, safety valves, spring loaded safety valves etc. Pressure in between 5 to 22P.s.i. Provided with drain valve to emptying the chamber. Provided with ISI mark heating elements, which are easily replaceable & heats the water to desired temperature & pressure. Pressure is indicated by pressure gauge, line air filter. Outer two jackets are provided with copper coil for water re-circulation with auto pressure cutoff device. With air compressor for aeration in fermentor. Capacity 100Liters 150Liters 200Liters

• Usage/Application: Gas Fitting
• Brand Name: Padmavati
• Material: Brass

SHAKERS, PLATFORMS, SO1 & SO2     This is an all purpose bioprocessing system designed to maximize yields in both fermentation and cell culture. Uses the newest advances in microprocessor control with successful stirred-tank technology, Bioferma blends multi-loop process control with the latest innovation in cell culture. Various accessories are available, including a selection of interchangeable bioreactor vessel. Control pH, DO, temperature, airflow, stirring speed using microprocessor based control system.

We offer Biogas Plant which is the perfect combination of digester and gas holder. The provided plant finds application in domestic, institutional and commercial places. Our offered plant is perfect to be installed for treating effectively organic leftovers from the kitchens and gardens. Also, it is highly recognized among clients due to its easy installation and eco-friendly nature. Owing to its recycled biogas, this Biogas Plant is demanded for cooking purpose.   FEATURES: Moulded in one-piece Ready to use, easy to install and maintain Supplied in knock down condition Easy to assemble at site with nuts and bolts Leak-proof Can be used above the ground or underground Easy cleaning Easy to relocate, if required Higher capacity plants are also offeredas per requirement Best for kitchen waste, cow dung, vegetable waste, hotel and restaurant waste. STANDARD ACCESSORIES: Inlet/outlet pipes Inlet/outlet connection Gas outlet valve Central guide pipe system Spring-spider mechanism Biogas burner Standard Colour: BlackFood crusher and booster pump optionally provided

We offer floating type biogas plant.

• Material: SS
• Automation Grade: Semi-Automatic
• Power Source: Electric
• Power Supply: 2 HP
• Voltage: 220 Volt

• Capacity: 250-500 L
• Color: Green
• Type: FRP
• Material: MS
• Storage Material: Water
• Brand Name: HHES
• Size: 500 Ltr
• Usage/Application: Office, Shops, Restaurant, Construction Site and Any Other Places
• Surface: Color Coated

• Material: FRP
• Shape: Rectangutar or square
• Country of Origin: Made in India
• Color: Green. blu or any color
• Brand: Modcon
• Automation Grade: Manual

• Application: Sewage Treatment
• Water Source: Borewell Water
• Applicable Industry: Chemical/Petroleum
• Water Source Type: Industrial Effluent

• Plant Design: Customized
• Gas Requirements: Biogas
• Brand Name: LiderORG
•  :  

The GGE-Guascor® electronically carbureted, Miller cycle, SFGM engine series ranges from 1055 to 1100 kWb. This engine series provides excellent installation solutions for co- and tri-generation configurations. These engines have been designed to operate with Miller cycle which provides maximum efficiency and higher MEP than standard Otto cycle engines. This engine series is commonly used in facilities where a fast response to load changes is required, due to the fact that standard families of turbocharges is being used in Miller cycle configuration.

biogas, Solar Heating System, Solar Power System, Solar Home Light

Biogas Balloon, Biogas Generator, 40 kva generator, 1 kwe generator

biogas

Bioreactor