Membrane Filter Press Dealers (28 products available)

• Application: Separating Solids
• Weight: 100-1000kg
• Voltage: 220V
• Automatic Grade: Automatic
• Driven Type: Electric
• Warranty: 2years

The membrane strainer is a solid liquid separation equipment using the principle of pressure feeding. It is being used successfully in almost every industrial filtration processes. It includes a series of filter / strainer plates and frames or recessed plates which are arranged alternately. A filter / strainer medium is provided in between the plates. A feeding pump is utilized to force the liquid through the medium leaving the solid trapped inside.   Because of its simplicity and flexibility, the chamber Membrane Strainer has been widely applied in clarification and dewatering applications.

The initial operation of a membrane filter press is identical to that of its recessed chamber counterpart.   However once the filtration cycle is complete and final filtration pressure is achieved the feed into the filter press is stopped.   At this point the plates within the Filter Press can be inflated using either air or hydraulic pressure to exert a mechanical force on the filter cake retained in the chamber.   The effect of the squeeze is to physically compress the filter cake and force out additional moisture held within the cake giving a drier end result.   Membrane filter plates are used to   Reduce filter cake moisture content Reduce filtration cycle time Improve cake washing   This style of filter plate can be installed as   A full plate pack Alternately in conjunction with recessed companion plates as a more economical option.   Because of its simplicity and flexibility, the chamber Filter Press has been widely applied in clarification and dewatering applications. Membrane Filter Press technology is gaining increased acceptance because it reduces subsequent processing or disposal costs for filter cake. In many applications the membrane Filter Press significantly reduces residual moisture content, making this technology attractive for new plants and for upgrading existing facilities. In both cases the careful selection of plate and membrane materials is essential to the successful performance of the process.   Membrane Filter Press Plates have a chamber below the drainage surface that can be inflated. The common method used is water pressure, which is generated by pumping into the squeeze cavity to inflate the face of the plate against the filter cake. Membrane Plates are used to reduce the cake moisture content & shorten the filtration cycle time.   Mix Pack Membrane are the most common configuration (one recessed plate then one membrane plate alternate in the press plate pack). Membrane Plates usually operate at a feed pressure of up to 7 bar and squeeze pressure up to 15 bar. Special plates can be designed for higher feed & squeeze pressure.   Replaceable membranes can easily changeable. EPDM thermoplastic and other compounds are used for specific conditions. Plate filling problems are minimized and use of a rubber Membrane enables “empty-chamber” operation without damaging the plate, resulting a considerable reduction in incidents of plate failure. Even if the chamber is not completely filled, the filter cake is squeezed by the inflating filter lever and therefore perfectly dewatered.   During the initial phase of the filtration cycle, so-called “fill and filtration” the process is similar to the chamber Filter Press. After reaching a predefined pressure, usually around 3 - 7 bar, depending on the sludge characteristics, sludge feeding is stopped & the rubber membranes inflated, using either water or air as squeeze medium. The cake is hereby compressed and dewatered further. Then the squeeze medium is relieved & the cake discharged.

We manufacture MEMBRANE FILTER PRESSES. The membrane squeeze plate is offered to suit up to 16 bar squeezing pressure. Due to additional liquid extraction from the Cake during the squeeze cycle, moisture in the Filter Cake reduces. Filtration cycle time are reduced compared to the conventional recess chamber plate and also Plate and frame filter press, resulting in Benefits of membrane plates vs chamber plates.

• Type: Membrane
• Certification: CE Certified
• Weight: 100-1000kg
• Voltage: 380V
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1 Year

Application : Starch, Sugar & Steel Mill Wastes Fertilizers, Foodstuff & Food Color Industries Textiles and process House Wastes Effluent and Treatment Plants Ceramic & Clay Industries Pharmaceutical, Paper & Plasticizers Industries Vegetable Oils & Varnishes Tiles & Television Tube Manufacturing Industries Leather Processors & Lead Reclamation Municipal Sewage Sludge and Minerals Industries Tanning Industries Dyes, Pigments & Dairy Industries

Nirmal poly plast industries manufactures a wide range of fully automatic membrane filter ranging from 150 mm sq. To 1500 mm sq. Type of plates like chamber plates. Plate & frame are available in one eyed, two eyed, three eyed, four eyed and five eyed design. The plates are being molded by a special technique called icm process. Both the high pressure filter plates come with standing a pressure upto 25 bar, and low pressure filter plate upto 7 bar. We have the capacity to produce 15000 nos. Of filter plates per year and 250 nos. Of filter press of different size /year.

  Special Features: • Shorter cycle time• Reduced filtration time• Increased capacity• Plate size ranging from 800 x 800 to 2000 X 2000mm• Pressure: upto 24 bar• Complete Automatic cycle option• Increased dry solids• Easily replaceable• Lower waste disposal cost• Membrane: PP / EP40• Hydraulics: upto 650 tons MATERIALS OF CONSTRUCTION: Structure. Mild SteelOperating Pressure: upto 24 bar Max. Operating Temp. : 90"CMOC of filter element: PP APPLICATION: Best for Dry fractination of Palmolein, ETP-Plants, Granites, Marble & Ceramic Industries, Gypsum, Bentoite, Crystalline Salts, Pigments, Sludges generated from Galvanizing Plants containing Chromium, Zinc. Aluminium, Copper, Nickel or Cadmium, and many more.

• Well adaptability: Low operating cost
• Any color: Well design
• Filtering area: 10 m2- 80 m2
• Filtering pressure: 6 bars -12 bars
• Cake thickness: 30-35mm
• Fully automatic: Automatic membrane filter press

The working room of the membrane filter press consists of chambers, limited by two adjacent plates with recesses in the central part. Unlike the chamber plates, the drainage draining the filtrate is located on movable membranes serving for pressing and “wringing” of the filtrated cake. Water or air under pressure is used to compress the membranes. Once the filter press is filled with the suspension, this medium is fed to the room under the membranes and its subsequent lifting compresses the cake and pushes out the residual liquid. The liquid passes through the cloth and is discharged out of the filter press. The thickness of the filtration chamber is usually 30 – 50 mm before compressing, by compressing the membrane it is reduced most often by 20 – 40%.The suspension is fed via a central or corner inlet passing through the whole set of plates. The filtrate is drained by drainage on the membrane surface (under clothes) and then by channels drilled inside the plates out of the filter press. Filtrating (filling) pressure before the start of the membrane compression is usually 8 bars, it rises up to 15 bars during compressing (structurally, we manufacture filter presses to a maximum pressure of 30 bars).The filter presses are equipped with a security system, which will not enable opening of the filter presses if the system of membrane compression was not previously decompressed. This prevents from damaging to the membranes by accidental opening of the filter press. The filtration plates including membranes are standard made of polypropylene, another material can be chosen.

Application :        Starch, Sugar & Steel Mill Wastes        Fertilizers, Foodstuff & Food Color Industries        Textiles and process House Wastes        Effluent and Treatment Plants        Ceramic & Clay Industries        Pharmaceutical, Paper & Plasticizers Industries        Vegetable Oils & Varnishes        Tiles & Television Tube Manufacturing Industries        Leather Processors & Lead Reclamation        Municipal Sewage Sludge and Minerals Industries        Tanning Industries          Dyes, Pigments & Dairy Industries

Despite being more expensive, these filters are becoming used more frequently. On the outside, these filter presses look like conventional filters but one of the inner surfaces of each chamber is coated with a polypropylene membrane or a rubber membrane .

Clients can avail from us Membrane Filter Press that is made using the latest techniques. Our Membrane Filter Press is acclaimed to diminish the disposal costs or successive processing for Filter Cake. Furthermore, Membrane Filter Presses, offered by us, are high in demand as they efficiently decrease the remaining moisture content. Membrane Filter Press can be purchased at reasonable price from us. We are a well-reckoned Membrane Filter Press Manufacturer, Exporter and Supplier in Gujarat, India. Details Membrane Filter Press is fitted with flexible Membrane PlatePlastic or rubber diaphragm is used to cover the exterior faces of the Membrane Filter Press.Membrane Filter Press operates at a feed pressure of up to 7 bars and squeeze pressure up to 15 bars. Special Membrane Filter Press can be designed for higher feed and squeeze pressure. Advantage of Membrane Filter Press Membrane Filter Press is better as the ordinary filter presses filter only 75 - 80 % of the batch in the first 50 % of the cycle time.If the Plate stock is opened before the full cycle is complete, the result is a wet, sloppy cake.A Membrane Filter Press can be stopped at the most efficient point in its cycle.By applying pressure to the Membrane built in to the Filter Plate, the Cake squeezed to achieve final solid content in considerably reduced cycle time. Design considerations of Membrane Filter Press Filteration pressureFilteration timeSqueezing pressureSqueezing timeThickness of Cake before the squeezing processThickness of Cake after the squeezing processDensity and Cake dryness

Membrane Filter Presses are used for extra Moisture reduction in the cake. It contains one Membrane Plate which has the inflatable elastomer, and a companion plate made of solid Poly propylene. During the initial phase of the filtration, usually called filling cycle, the process is similar to the chamber filter press. After reaching a predefined pressure, usually around 4-7 bar, depending on the sludge characteristics, sludge feeding is stopped and the membranes slowly inflated, using either water or air as squeeze medium. The cake is hereby compressed and dewatered further. This process is continued until the filtrate flow reaches a preset minimum limit. Then the squeeze medium is relieved and the cake discharged. • Membrane filter plates are designed just like the previously described chamber plates. A flexible membrane is fixed to the support body. Materials for the membranes include Polypropylene, synthetic rubber (for example NBR, EPDM) or thermoplastic elastomer (TPE). The membrane is impermeable and serves to compress the cake within the chamber after the filtration process is complete. Liquid or gas (compressed-air) can be used as membrane inflation media. In order to guarantee maximum protection for the membrane filter press, we use special safety systems for the various membrane inflation media. Inflation pressures up to 24 bar, and in special cases even higher, are possible. Our organization specializes in manufacturing a qualitative array of Filter Press that consist of manual made option. The given filter press is available on different specifications in order to meet the need of customers. This filter press is manufactured by optimum quality material & advance technology in adherence with set industry standards. Our quality controllers conduct a series of tests on this filter press before dispatching to our customers.   Applications:-   Palm Oil. Ceramic, Biological. Pharma, Solvent plants, etc.   Specifications And Features :-   Plate size ranging from 630 x 630mm to 1500 x 1500 mm. MOC: PP,TPE,NBR . Pressure: up to 32 bar. Controls: Fully automatic /Semi Automatic. Hydraulics: up to 300 Tons. Complete automatic cycle option. Boom drip tray. Plate Moving Mechanism.

We are offering membrane filter press. Our membrane filter press is based on comprehensive research and development based on the working principles of pressure filters. Besides these the membrane filter press is in great demand in many areas like waste water sludge & chemical andor biological sludge separation. The working methodology of these filter presses is very critical and includes compression of a filter in between a fixed head on one end and movable head on the other end. application areas: effluent treatment plants- textile, paper, leather, jute sewages, industrial & municipal waste water ceramics- clay, porcelain, fine earth, marble and granite metallurgy- electroplating & electro polishing, steel mill waste, nickel, copper, zinc lead, silver pharma industries- antibiotic, syrup, intermediates and bulk drugs chemical industries- basic chemicals, organic & inorganic, resins, starch, enzymes, and pesticides activated clay, phosphoric compounds, marine chemicals dye stuffs- pigments, dyes, intermediates food industries- vegetable oils, cane juice, food colors soups, distilleries, dairies and hotels type of construction: recessed plate and frame membrane plate wash - non wash option different feed eye options high pressure applications

• Country of Origin: Made in India
• Application: Industrial
• Filtration Capacity: >3000 litres/hr
• No Of Plates: >50
• Max Pressure: 5 Bar
• Frame Type: Mild Steel

We are ardently engaged in exporting and supplying a qualitative range of PP Membrane Filter Press which is specifically designed for the vacuum filtration of many aqueous solutions as well as biological fluids. Backed by advanced manufacturing facilities, our High pressure Membrane Filter can be customized in accordance with the specifications of our clients. Known to render better performance and longer service life, our efficient filters are widely demanded in the market for use in laboratories and other allied applications. Owing to the success of our products, we have made our mark among the reputed Membrane Filter Exporters and Suppliers.

Membrane filter press plates utilize an impermeable, flexible member attached to the filter press plate core. This terminology should not be confused with sub micron "membranes" used in ultra filtration or reverse osmosis. In filter presses, a membrane, also called a diaphragm, is designed to inflate by compressed air or pressurized water to squeeze residual moisture out of the formed filter cake. Polypropylene membrane plates supplied in FILTER PRESS INDIA Filter Presses have been in use for more than ten years with significant success. Theses plates are currently in many severe applications - some operating two cycles per hour, 24 hours per day for two years - tens of thousand of cycles without failure.

Here the process of Membrane Filter Plate is applicable. After the pressure is achieved on the preset the sludge stops entering into the chamber and the membranes are inflated. The chamber below has a drainage through which Air or water is used to generate pressure and is pumped inside the squeeze cavity to inflate the face of the plate against the filter cake. The cake is dewatered and then removed from the chamber.Less filtration time. Uniform filter cake for continuous output. Dry cake matter content as squeezing procedure is involved. Low Investment cost. High Acceptability to all Product compositions. Low energy consumption.

Plate and Membrane Type Filter Press, Automatic Filter Press

Membrane Filter Press, Automatic Filter Press, Manual Filter Press

Membrane Filter Press, Semi Automatic Filter Press, polypropylene plate

membrane type filter press, Auto Shifter Type Filter Press

We are widely reckoned as one of the most prominent Exporters, Importers and Suppliers of High Pressure PP Membrane Filter Press. High Pressure PP Membrane Filter Press, offered by us, has automatic control system and a smooth and reliable hydraulic system. High Pressure PP Membrane Filter Press is used in solid-liquid separation process in coal washing, metallurgy, mining, petroleum, chemical, dyestuff, medicine, food, sewage treatment and other industries.  Features : Frequency conversion motor drawplate : motor is Germany SEW product, smooth and reliable in operation and low in power consumption. Automatic control system : Omron, Siemens and Schneider products are used to realize overall process automatic control. Hydraulic system is smooth and reliable in operation : hydraulic components are Italian ATOS products; the integrated components are made through machining center; the oil tank is fabricated with advanced manufacturing process.

Membrane Filter Press, Automatic Filter Press, screw type filter press

Membrane Filter Press, Power Packs, Membrane Filter Plates, pp filter cloth

Membrane Filter Press, SS Filter Press, SS Filter Plates, CI Filter Plates

membrane filter presses, plate filter presses, Pumps Spares

Automatic Membrane Filter Press, Horizontal Plastic Chemical Pumps

Automatic Membrane Filter Press, Electro Coagulation ETP