Test Chamber Dealers in Naraina, Delhi (3 products available)

For immaculate and easy to use Dust Test Chamber, you can completely rely on us. We are reputed Manufacturer, Supplier and Exporter of Dust Test Chamber from New Delhi, India. The construction of the Dust Test Chamber is designed to avoid direct radiation of heat on the test specimen. The floor of the Dust Test Chamber ensures that the dust falls in to the hopper for recirculation. Customers can avail the Chamber at competitive rates.   ConstructionThe construction of the Chamber will be such to avoid direct radiation of heat on the test specimen. The floor of the chamber will be so designed as to permit the dust fall in to the hopper for recirculation of supporting specified load of the floor area.Exterior Chamber : Will be made of 18 swg CRC M. S. Sheet with 3 coats of paint or 18 swg Stainless Steel   Interior Chamber : Made of 18 swg Stainless Steel Heating SystemFor temperature uniformity in the chamber, low surface loading sealed tubular heaters will be provided as per IS 4159. The heaters will be fixed in conditioning space in the chamber duly baffled to avoid direct radiation.Heat Input Controlling : Through Solid State Relay proportional control for heating.Dust Agitating Mechanism Dust Agitating Mechanism will be provided with Fan with Motor of sufficient capacity without allowing to heat up unduly during constant operation of 200 hours. Pressure Vacuum will be provided in the Dust Spray Chamber. Provision of using, either fan or vacuum or both can be used at a time, will be provided. Average dust sprayed will be 25 gms ±5 gms in 5 minutes. InstrumentationSolid State Digital Temperature Controller-cum-Indicator will be provided with PT-100 Temperature Thermocouple.Control PanelSeparate Control Panel on top of the Chamber will be provided with Contactors, On/Off Switches, Fuses, and Indicating Lamps.WiringThe wiring, will be channel type with suitable current rated copper wire as per, IS Code.Safety Protection Overload Protector for motor. MCB for heaters. Safety cut off thermostat with audiovisual alarm for over shooting temperature. Back up Fuse protection for mains and individual circuit.

• Type: Salt Fog Chamber
• Certification: CE Certified
• Color: Available in Many Colors
• Voltage: 220V
• Application: Industrial Use
• Power: 6-9kw

The updated models of Salt/Cass Fog Test Chamber specially designed for evaluating the corrosion resistance of the surface treatment of metallic materials by Copper Accelerated Acetic Acid Salt Spray Test Method. It consists of following parts : Test Chamber : It consists of Cabinet and Lid and is constructed with insulated double structure made of FRP (Fiber Reinforced Plastic) Moulded Sheet. The Interior & Exterior Sides of the Chamber are Acid Proof, Alkali Proof, Impact Proof and easy to clean. The upper part (triangular shaped lid made of FRP with Acrylic Glass Window) has sufficient space for the mist to accumulate naturally on it and is so shaped that drops so accumulated do not fall on specimen being tested. A full top opening door will be provided for ensuring maximum working space inside the Chamber. Air-Saturator : It is provided to supply heated and humidified clean air, over 90% to 98% RH, for Atomization of the solution. It consists of Body (made of stainless steel), Heater, Bubbling Nozzle, Air Cleaner & Pressure Regulator. Air Regulator : The Air Regulator will maintain a constant pressure of air at 70 to 170 kpa Air Filter : The compressed air will be passed through a filter arrangement to remove all traces of oil and solid matters before sent to the saturation tower. Lid Sealing : Lid sealing through water seal method Mist Dispersion Atomizer : Atomizer made of Acrylic Glass will be equipped in the Chamber having property of non-choking. It produces a mist of atomized solution, which is distributed uniformly throughout the exposure zone by means of Mist Dispersion Atomizer incorporated with a baffle to prevent dispersion of large liquid droplets. Heating System : The temperature within the chamber maintained by heater with blower system, which provided in-between the exterior and interior walls. Solution Supply Tank : Solution Supply Tank will be provided to supply solution to Mist Dispersion Tower and will be made of FRP (Fiber Reinforced Plastic) Moulded Sheet. Solution Heating : Heating of solution in the Solution Tank by a special type of Glass Heating Element (two nos) fitted in the Solution Tank. Mist Collector : Two Mist Cylinders are provided for measurement mist quantity. Each has 80 cm² of horizontal area. The condensate is collected in individual graduated cylinders. pH Indicator : pH Indicator is inbuilt in Control Panel Control Panel : Separate Control Panel will be provided. The Control Panel will House : RH and Temperature Controller-cum-Indicator for Main Chamber. PID Temperature Controller-cum-Indicator for Air Saturating Tower. PID Temperature Controller-cum-Indicator for Solution Tank. Pre – Set Timer, ON/OFF Switches, MCB, Electronic Relays, Indicating Lamps & Time Totaliser pH Indicator.   Safety DeviceAudiovisual Alarm start at the time of shortage of water in both the Saturating Tower and Solution Tank. WiringAll wiring will be as IS code.  Channel type wiring will be done with suitable current rated copper wires.Standard Accessories SS Rod with PVC coating : 05 pcs Measuring Cylinder with Rubber Cork : 02 nos Glass Funnel : 02 nos S. S. Hanger : 15 pcs EPT Tube : 01 Mtr.                                                             Power Supply : 220/240 V, 50 Hz, Single Phase, AC Mains.                                                                                                                              Performance Test Temperature :  Ambient to 50°C Temperature Accuracy : ± 1oC. Humidity Range :  95% to 98% will be maintained during the Salt Spray with  saturation of Salt Solution. Humidity Indicator :  RH Indicator will measure 90% to 100%. Mist Collection :  1-3ml/80cm²/hour at the same position as specimen to be tested. Mist Pressure :  0.8-1.8Kg/cm² (70-170 KPA). Heating System :  Through hot air tower system.   Standards  : As per ISO 7253:1984, IS – 101 (Part 6/Sec 1 – June 1997), IS – 9000, IS – 6910, ISO – 3768 Part-I, ASTM – B – 117 – 73, ASTM – B – 368, DIN – 50021, JIS – 2371

We are offering stability test chamber. Material of construction: castor wheel mounted cabinet is double walled with inner chamber of stainless steel sheet of grade ss 304 and outer wall of heavy gauge pcrc steel. Sheet duly degreased and pre treated with primers for rust proofing duly painted with attractive stove enamel or powder coated . temperature range: 10 degree c to 60 degree c (accuracy: + 0.2o c) temperature control: the temperature inside the photo stability test chamber is controlled by intelligent programmable temperature controller and indicator. This controller is based on the microcontroller nano watt technology and its ergonomic design suits for any specific requirement of the photo stability test chamber like data logger facility, thermal and dot matrix interface, direct data load facility in computer office automation software like ms-word and excel and many other features listed in the specification bellow. humidity range: 40% to 95% rh (accuracy: + 1%) accurate micro processor based humidity control system: the labsol” stability chamber uses a microprocessor based; electronic humidity sensor detector is an exact logarithmic function of the humidity concentration in the environment of the chamber between source and detector. Advanced design provides a very stable drift-free output requiring less frequent calibration. illumination: our photo stability chamber conforms to the illumination requirement as per the international conference on harmonization of technical requirements for registration of pharmaceuticals for human use the unit is provided with four fluorescent light mounted in a diffuser enclosure at the top of the chamber providing minimum illumination level of 1.2 million lux ,which is effectively controlled through a programmable illumination controller