Vacuum Blasting Machine Dealers (24 products available)

KU-15C Portable mounted on 4 wheels Uniform cleaning and finishing Vaccum pump recovery Two Gun outlet

• Material: Metal
• Warranty: 1 year
• Blast Hose Dia & Length: 19mm X 7.5m
• Blast Nozzle TC: 6 mm Dia
• Dust Collector: SS Cartridge
• Tank Capacity: 21-28 liters

 MEC offer portable dust free abrasive blasting equipment with high vacuum power and efficient separation for abrasives & debris. MEC vacuum blasting machines are suitable for different purposes, applications for surface preparation before coating and needs only one man to operate. The blasters are based on pressure vessels in combination with compressed air filters and pressure regulators that ensure sufficient speed of blasting operation in a dust free environment. Abrasive is automatically and instantly recovered for reuse. No flying dust & abrasive to contaminate surrounding. A special valve on pressure vessel allows to work with a blasting pressure as low as 1 bar and as high as 7 bar with the same machine. Vacuum blasting technique can be used on delicate blasting jobs where blasting on low pressures is a must. All MEC vacuum blasting machines comes with a standard special lightweight blast head, blast and vacuum hose assembly, as well as a set of brushes to treat flat surfaces. The very special fibres used in brushes ensure best performance and economy.Our Standard Models MCB-V MCB-X MCB-XV P-14

• Voltage: 110V
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year
• Weight: 100-1000kg
• Automatic Grade: Automatic

Features:     Noise less operation     Power efficient     Rugged construction     Easy to operate Vacuum Blast Equipment Specifications:Restrictive environmental legislation and a greater awareness of health hazards were the main reasons for development of vacuum blasting equipment. The advantages of the equipment are not limited to preventing environmental and health problems, in many applications it is also a fully justified method of surface preparation on an economic basis. Disposal costs of hazardous waste is minimal by the use of recyclable abrasives, so the amount of abrasives used is much lower than compared with open-blasting. The equipment has many applications. Besides for construction and maintenance of ships, the equipment can also be used for the maintenance of bridges, machinery, power plants or for the renovation of concrete. steel, shipbuilding, offshore and (petro) chemical industries and also for maintenance purpose in the civil works sector such as cleaning bridges , tunnels and buildings etc.The Synco Model : SPBV 08C-1 is a compact and versatile vacuum blasting machine which gives the user flexibility of cleaning components to a depth / height of about 5 mtrs from the machine position. The sturdy construction is designed for rough handling. This model is easy to move to the place of blasting due to its compact size where other machines find difficulty to reach such as submarine holds.

We offer Vacuum Blasting Machine. It is a continuous operating grit blasting machine in which abrasive is automatically recovered instantly after impacting the surface. Powered by only compressed air, it needs no electricity and hence s suitable for site work. It removes light paint and scale very fast and the removal process is much better than chemical cleaning or wire brushing. No hazardous gas is produced so operator is completely safe. It is also fully suitable for finishing, etching, shot peening and surface preparation before coating. a number of abrasives can be used such as metallic grit, glass beads, steel shots, plastic media and walnut shell etc. To meet specific requirement of cleaning and finishing. The impact of blast stream is highly controllable so that surface is not deformed or damaged. If a galvanized or anodized sheet is painted, the removal of paint can be easily effected without any harm to galvanized/anodized layer. Mounted on four castor wheels, it can be wheeled to required site. Instant recovery of dust and abrasive within the gun head ensures pollution free atmosphere, thus nearby operations can be performed simultaneously. The machine could be used for: local rust removal at spots grit / shot blasting. shot peening. paint removal for aircraft components. cleaning before and after welding surface etching.

Restrictive environmental legislation and a greater awareness of health hazards were the main reasons for development of vacuum blasting equipment. The advantages of the equipment are not limited to preventing environmental and health problems, in many applications it is also a fully justified method of surface preparation on an economic basis.   Disposal costs of hazardous waste is minimal by the use of recyclable abrasives, so the amount of abrasives used is much lower than compared with open-blasting. The equipment has many applications. Besides for construction and maintenance of ships, the equipment can also be used for the maintenance of bridges, machinery, power plants or for the renovation of concrete. The machine therefore is commonly found in steel, shipbuilding, offshore and petro-chemical industries apart from other places.

Blasting is the simplest and most effective way to remove rust, old paint and other materials from various surfaces. The Nederman vacuum blaster is a clean

MEC offer portable dust free abrasive blasting equipment with high vacuum power and efficient separation for abrasives & debris. MEC vacuum blasting machines are suitable for different purposes, applications for surface preparation before coating and needs only one man to operate. The blasters are based on pressure vessels in combination with compressed air filters and pressure regulators that ensure sufficient speed of blasting operation in a dust free environment. Abrasive is automatically and instantly recovered for reuse. No flying dust & abrasive to contaminate surrounding. A special valve on pressure vessel allows to work with a blasting pressure as low as 1 bar and as high as 7 bar with the same machine. Vacuum blasting technique can be used on delicate blasting jobs where blasting on low pressures is a must. All MEC vacuum blasting machines comes with a standard special lightweight blast head, blast and vacuum hose assembly, as well as a set of brushes to treat flat surfaces. The very special fibres used in brushes ensure best performance and economy.

Vacuum Blasting Machine

• Certification: CE Certified
• Voltage: 440V
• Power: 3-6kw
• Driven Type: Electric
• Warranty: 1 Year
• After-Sales Service Provided: Spare Parts
• Automatic Grade: Semi Automatic

Vacuum Blasting Machine, HVOF Thermal Spray Gun, plasma spray system

Vacuum Blasting Machine, tum blast type shot blasting machine, Abrasives

Vacuum Blasting Machines, blasting machines, electric blasting machines

Vacuum Blasting Machine, paint room system and coating booth

Vacuum Blasting Machine, stone texturing shot blasting machine

Vacuum Blasting Machine, Battery Manufacturing Plant

Vacuum Blasting Machine, liquid painting plant, abrasive blasting equipment

Vacuum Blasting Machine, Portable Sandblasting Machine

Vacuum Blasting Machine, Wire Nail Making Machine, Aluminium Foil Machine

Vacuum Blasting Machine, Blasting Guns For Cabinet Shot Blasting Machines

Vacuum Blasting Machine

Vacuum Blasting Machine, Valve Lapping Tool, Cylinder Head Assembly Bench

Closed Circuit Vaccum Blasting Machine, Steel Shot Grits