arc welding rectifier
40,000 - 48,000 Per Piece
1 Piece (MOQ)
Condition : New
Application : Industrial Use
Voltage : 440 V
Certificate : ISO 9001:2008
Type : Arc Welding Rectifiers
Input Voltage : 440V
Frequency : 50 Hz
Phase : Three Phase
Warranty : 2 Year
Arc Current : Yes
Country of Origin : India
DC Welding Rectifier
Type : Welding Rectifier
Application : Electric Furnace, Electronics Use
Input Voltage : 110V, 220V
Frequency : 60Hz
Power : 1-2kw, 2-4kw
Driven Type : Electric
Phase : Double Phase, Single Phase
Warranty : 1year
TERCO D.C. Welding Rectifiers Forced Air Cooled are used as power Source for manual metal Arc Welding (MMAW) jobs with bare & coated electrodes suitable for ferrous and non ferrous metals. These welding rectifiers are also used as an alternative to DC welding generators and even have an edge over DC welding generator as there are no moving parts in welding rectifier except the cooling fan which ensures almost nil maintenance cost, besides its low initial cost as compared to generator. These rectifiers can also be used as power source for plasma Arc cutting gas shielded arc welding & for Tungston Electrode (TIG) welding to do the welding of stainless steel copper alloys. Submerged Arc Welding and also suitable for carbon Air Arc Gouging.TRANSFORMERSpecially designed Transformer conforming to IS : 4559 1993 having core of high grade electrical steel Welding current is regulated by latest transconductor type control continuous current variations and 3 phase full waive bridge circuit used in current Rectifier for higher efficiency and steady form, Welding rectifiers are mounted on three solid rubber wheels (Front wheels swivelling & steerable type by means of draw bar) for easy portability, bye bolts had been provided to lift the machine. PROTECTION PROVIDED Both main & control rectifier protected against surges by semi conductor devices for positive protections. M.C.B. is provided for protection of the current controller. On-Off switch is provided on the front panel. OPTIONALRemote control with required cable length, voltmeter, Amp. meter and a set of welding accessories etc. can also be provided at an extra cost.ADVANTAGES Improves power factor and saves energy. Does not create unbalanced voltage fluctuation on the other load connected Simultaneously. Lower demand of primary current for starting. Very low running and maintenance cost. Extremely low ripples in the output.
DC Welding Rectifier
Type : Automatic
Input Voltage : 380V
Frequency : 60Hz
Power : 2-4kw
Driven Type : Electric
Phase : Double Phase, Single Phase
Warranty : 1 Year
Certificate : CE Certified
Application : Industrial
Durability : Long Life
Surface Finishing : Polished
Resistivity : Rust Resistant
Material : Metal
Drive Type : Electric
Welding Rectifier
Type : Welding Rectifier
Application : Electronics Use
Condition : New
Frequency : 60Hz
Driven Type : Electric
Phase : Single Phase
Warranty : 5years
MEMCO, SUPERGEN, ADOR Welding Rectifier MEMCO Welding Rectifier spare part, SUPERGEN Welding Rectifier spare part, ADOR Welding Rectifier spare part
Inverter Base Rectifier for TIG and Electrode Welding (Three Phase)
Inverter technology is a voltage conversion system which applied to welding makes compact power sources with low energy conversion. This rectifier is suitable for both tig as well as electrode welding. Following are the models available: a: irtte400: this is suitable for up to 4.0 mm electrode and tig rods a: irtte600: this is suitable for up to 5.0 mm electrode and tig rods
Thyristorised Welding Rectifier
We supply supreme quality thyristorised welding rectifier which cannot be availed anywhere else. We also supply fully thyristorised welding rectifier which is of exclusive quality as well. Our welding rectifiers are available at quite reasonable prices. We have also gained the position of one of the reliable welding rectifier suppliers in India. Process Weld Aid India SR Series, fully thyristorised MMA welding rectifier is built using advanced, solid state technology and is designed to meet the stringent demands of high quality radiographic welding in todays fabricating industries including Nuclear Power Plants, Chemical Process Plants, Deference, Steel Plants, Deference, Steel Plants, Thermal Power Plants, mining and Structural Fabrications, among others. FEATURES True, vertical welding current characteristics with higher open circuit voltage Immunity from AC input vottage fluctuation, with built-in overload and thermal cut-out protections. Hot start facilities for easy arc striking Effective prevention of electrode freezing. Single range current control with remote control facilities. Low input KCA rating Six-phase ripple free DC output gives excellent welding quality. Ideal for precise TIG welding with necessary accessories.
Thyristorised Welding Rectifier
Specifications: Rated Duty Cycle: 60% Dimensions: 675*435*760mm Rated output current(A): 60-500
DC Welding Rectifier
1.) Mild steel and low alloy steel at site where welds of high radiographic standard are required. 2.) Mild steel and low alloy steel in lighter guage resisting steel i.e, Stainless steel. 3.) low alloy and corrosion, heat and creep. 4.) Non-ferrous metal : model Specifications SSRT-400 SSRT-600 Supply Voltage 380 / 415 / 440 380 / 415 / 440 Primary current at max. output 40 A 68 A Open circuit voltage 80 80 Max. continous current at 100% duty cycle 300 420 KVA - Max. Continous 20 30 KVA - Max. 26 43.2 Weldi
DC Welding Rectifier is one of the many qualitative products offered by us. We have manufactured DC Welding Rectifier to supply D.C welding current to 3 phase, 50 Hz A.C Mains power is fed at voltage ranging from 380 to 440 volt. The series of our DC Welding Rectifier is ideal for manual arc in the welding of various metals and pipes. We provide DC Welding Rectifier with Ammeter and voltmeter for direct reading of the welding current and voltage and remote control device at extra cost. Used In The Welding Of Mild steel and low alloy steel at site where welds of high radiographic standard are required. Pipes Low alloy and corrosion, heat and creep Non-ferrous metals Mild steel and low alloy steel in lighter gauge resisting steel i.e, Stainless steel
DC Welding Rectifier
Range : 50-300 to 600 Amp
Our offered range of welding rectifiers is made by our adroit and experienced professionals using the optimum quality raw materials and innovative techniques. These rectifiers are widely cherished by our clients for their features like low power consumption, stepless current adjustment and high performance in DC welding.
Diode DC Welding Rectifiers
echpro series of Welding Rectifier are forced air cooled silicon type. Comgination of well designed rectifier & transductor unit gives smo th and steady arc with minimum spatter & excellent weld bead. It gives ideal DC power source for Manual Metal Arc and Tungsten InertGas (TIG) welding. Features : * Most rugged & heavy duty machine * Ideal for site & Construction purpose * Easy arc Striking with all types of electrodes * Easy for maintenance
DC Welding Rectifier
Dc Welding Rectifier jain Weld House Offers a Series of Armac Portable Arc Welders Optimized to Be the Most Rugged & Reliable Stick Welders , Tig Welders, Mig Welders , Pug Cutters in the Market.
Welding Rectifier
arc welding rectifiers
arc welding rectifiers
arc welding rectifier
Welding Rectifiers
spot welding rectifiers
Welding Rectifiers
inverter welding rectifier
Inverter ARC Welding Rectifier