Dharmesh Enterprises Ghatkopar, Mumbai, Maharashtra

UT-100 comes standard with Ultratorch, soldering tip, hot air tip, shrink attachment, tip and torch ejectors, sponge, tool holder and spanner wrench packed in a metal storage/carrying case UT-100-TC includes Ultratorch, three Ultratip® soldering tips, hot air tip, shrink attachment, hot knife, tip and torch ejectors, solder, wire cutter, needle nose pliers, sponge, tool holder, spanner wrench, and cap packed in a rugged plastic storage/carrying case Triple function: soldering iron, flameless heat tool and brazing torch Lighter in weight than competitive models, making it easy to hold and use over extended periods of time Butane-powered, cordless and completely portable, ready-to-use in 30 seconds Adjustable temperature control Soldering temperature up to 932°F/500°C, ideal for use with today's lead-free solder Hot air temperature up to 1202°F/650°C, perfect for Solderseal™ environmental "heat and seal" connectors Torch temperature up to 2372°F/1260°C Sturdy metal tank holds enough fuel for up to 2 hours of operation UL & GS/TUV Listed for user safety Optional accessories available and interchangeable between UT-100 & UT100Si Use to pinpoint heat, remove surface mount components, repair vinyl, shrink heat shrink tubing, solder and desolder, spot dry, torch materials and more.   Ultratorch Dimensions: 9.5" L (242 mm) Equivalent to Electric Iron: 20 to 80 Watt Approx. Operating Time: 120 min. Gas Tank Capacity: 1 fl. oz. (28 cc) Approx. Hot Air Tip Temp.: 1292° F (600° C) Net Weight: 3.7 oz. (90 g) Approx. Torch Tip Temp. 2372° F (1260° C) Shipping Weight UT-100: 1 lb. Solder Tip Temp.: 392° F to 932° F (200° C to 500° C) Shipping Weight UT-100-TC: 2 lb. Recommended Fuel: Master Ultratane® Butane Shipped Empty  

Model Number : DESCRIPTION

Standard with unit, solder tip, heat tip, shrink attachment and plastic cap Built-in self-igniting button for consistent ignition Pistol grip design, great for extended use applications High performance, solder tip can reach approximately 932°F/500°C Built-in window indicates fuel level High capacity can run up to 3-hours on a full tank Use to pinpoint heat, shrink heat shrink tubing, solder and desolder, strip insulation, terminate specialty connectors, and more.

  Standard with solder tip, heat tip and torch tip   Completely portable, lightweight and easy to handle   Economically priced   Temperatures up to 2370°F/1300°C   Ignite unit with flint lighter built into the cap   Use to pinpoint heat, silver solder, solder and desolder, shrink heat shrink tubing, strip insulation with hot knife, torch materials and more. SPECIFICATIONS   Dimensions: 6.5" L (16.6 cm) w/o cap   Equivalent to Electric Iron: 10 to 60 Watt   Recommended Fuel: Master Ultratane® Butane   Gas Tank Capacity: .6 fl. oz. (.01 L)   Approx. Operating Time: 60 min.   Net Weight: 1.9 oz. (54 g)   Approx. Heat Tip Temp.: 780° F (420° C)   Shipping Weight: 1 lb.   Approx. Torch Temp.: 2370° F (1300° C)   Shipped Empty   Approx. Solder Tip Temp.: 395° F to 780°F(200° C to 420°C)

Standard with body, 2 solder tips (1-.5mm conical tip and 1-1.5mm chisel tip), tip removal wrench, and 3 AA Alkaline batteries Lightweight and completely portable, equivalent to a 6W iron Solders longer, approximately 60 minutes continuous duty Solders up to 160 joints intermittently with new batteries Fast start-up, reaches 361° F (183° C) in 10 seconds Total of 8 tips available, 2 standard Top quality, plug-in solder tips incorporate built-in heater (patent pending) Use to solder and desolder micro to small sized parts, perfect for field service and repair work. SPECIFICATIONS Dimensions: 6.8" L x 1.4" W x .8" D (173mm L x 35.5mm W x 20mm D) Approx. Temp. Drop When Touching Object: 212° F (100° C) Batteries: 3-1.5V Alkaline, AA Heater Type: Built-in, plug-in mounting, iron-plated anti-corrosion Approx. Solder Tip Temp.: 6W (max) 932° F (500° C) Approx. Run Time: 60 Min. Continuous w/New Batteries Max. Solder Tip Temp.: 1040° F (560° C) Approx. No. of Solder Joints, ntermitently: 160 using New Batteries Approx. Tip Life: 30,000 cycles (joints) Net Weight: 3.8 oz. w/Batteries (105 grams w/Batteries) Time to Reach Operating Temp.: 361° F in 10 Sec. (183° C in 10 Sec.) Shipping Weight: 1 lb

  Comes standard with 1.2" (30.7 mm) chisel type soldering tip   A top quality soldering iron for demanding production jobs and general heavy duty maintenance work   Great for running seams in sheet metal, soldering large connections in the electrical, plumbing, construction HVAC and metal working markets   Completely cordless, lets you work almost anywhere! Runs on butane. For best results we recommend Master ULTRATANE® BUTANE fuel   Features pure copper based solder tips which are nickel and chrome plated and tinned; manufactured using a patented process which produces a uniform iron and chrome plating thickness for long lasting solder tip life. Tips need no filing   Sturdy metal handle and refillable tank holds enough gas to run 70 minutes at setting no. 3   Quick start up. Comes up to full operating temperature within one minute   UL & GS/TUV Listed for user safety   Protected by international patents Dimensions: 10.75" L (273 mm) Equivalent to Electric Iron: 150-300 Watt Recommended Fuel: Master Ultratane® Butane Gas Tank Capacity: 2.2 fl. oz. (63 ml) Approx. Operating Time: 70 min. Net Weight: 360 grams (12.70 oz.) Approx. Solder Tip Temp.: 572° F to 986° F (300° C to 530° C) Shipping Weight: 1 lb. Shipped Empty

Complete system comes standard with 650°F heating element, adjustable stand and heat shrink attachment Ideal heat & air flow (3.8 CFM), performs benchtop heating jobs without excess air flow, won’t blow components around work station Quiet running motor, eliminates noisy production areas 3 optional easy-to-change plug-in heating elements available: 500°, 650° & 800°F Use to activate adhesive, cure epoxies, dry components, melt solder preforms, remove decals, shrink tubing and more

two heat settings: 500° & 1000° f - accommodates many automotive and commercial applications. two fan speeds - low & high (7 & 9 cfm) resettable thermostat - protects element against over heating lightweight - 1 lb. - easy to hold at any angle for long periods of time, eliminates operator fatigue built-in hand guard - protects hand and fingers. Recessed switch guards against knocks and bumps 3-wire grounded cord set - a positive grounding system for user safety ul and cul listed - safety agency tested & approved for user safety thermoplastic housing - for high impact durability built-in stand - very stable, allows user to set heat gun down in an upright position. use to bend and form plastics, dry body fillers, remove decals, spot dry paint, shrink tubing, packaging and more.

3 models produce 300°F, 500°F or 750°F. High temperatures accommodate many heating, drying & shrinking applications High air flow rating - 47 CFM at 2200 FPM means jobs get done fast Brushless induction type motor for quiet continuous duty operation Rubber backed stand, permits 90° non-slip adjustability. Use in any position or mount on equipment Comfort balanced handle for carrying or portable use Use to bend plastics, dry materials, parts and ink, heat materials, mount over conveyor lines and on machinery and more

Self-igniting piezo electric ignition that is easy to start and eliminates need for lighter Self-contained, metal fuel tank that is rugged and lightweight, easy to use, eliminates bulky canister Large fuel capacity, 80 cc self-contained tank for 30-minute continuous run time Large sized adjustable blue flame that accommodates many heavy-duty industrial applications with temperatures up to 2500°F/1300°C Safety lock that prevents unintentional ignition, locks for storage Meets Consumer Products Safety Commission (CPSC) Requirements Use to braze with special alloy welding rods, heat and bend thin metals, loosen rusted bolts, pop dents out of metal, shrink and terminate heavy wall adhesive lined tubing, solder and desolder, and more. SPECIFICATIONS Dimensions: 6.5" H x 5" W x 1.8" D Fuel Tank: Metal, Built-in, Refillable Recommended Fuel: Master Ultratane® Butane Net Weight: 10.6 oz. Approx. Run Time: 30 Min. Shipping Weight: 1 lb. Approx. Flame Temp.: 2500° F Shipped Empty

Standard with unit, solder tip, heat tip, shrink attachment and protective cap Built-in fuel filter for consistent fuel ignition Adjustable temperatures up to 1004°F Built-in window indicates fuel level Dual function soldering iron and heat tool Sturdy metal tank that holds enough gas for 4.5 hours of operation at #3 setting UL & GS/TUV Listed for user safety Use to pinpoint heat, shrink heat shrink tubing, solder and desolder, strip insulation, terminate specialty connectors, and more.  

  Standard with UT-35 iron with protective cap and a unique 1.6mm chisel type preheat tip mounted. Completely portable, lightweight and easy to handle, does not require cords, batteries or cartridges. Adjustable temperature control quickly regulates power to the tip, equivalent to a 20-60 watt electric soldering iron. Features unique iron plated, multifunction, corrosion resistant, preheat solder tips which work as both a soldering and flameless heat tip at the same time. Unique tips heat up quickly and last longer. Built-in window indicates fuel level. Refill with Master Ultratane® Butane for best performance. GS/TUV Listed for user safety Use to pinpoint heat, remove surface mount components, repair vinyl, shrink heat shrinkable tubing, solder & desolder, spot dry, strip insulation with hot knife and more.  

Model Number : DESCRIPTION

  Crimps "crimp & heat seal" type connectors   Two precision-ground wire cutters, up-front anvil-type and scissors type, located behind pivot point   Cuts 6-32, 8-32, 10-32, 10-24 and 4-40 bolts and screws   Scissors action wire stripper is precision-ground for accuracy and clean, neat stripping Strips stranded wire in 22 to 10 AWG sizes and solid wire in 18 to 8 AWG sizes   Cushioned handles for user comfort, made of heat-treated tool steel for long life, reliability and accuracy.

The finest "Crimp & Heat-Seal" connector on the market today.  Better wire contact - Less voltage drop - Better current flow Seamless butt connectors & brazed seam rings and spades - prevents opening of connector barrel for stronger crimp Uniform adhesive flow does not overflow onto terminal to impede contact Heat shrink tubing does not reduce in length, creating better insulation along with superior wire support and strain relief Translucent, adhesive-lined polyolefin shrink tubing - Allows visual inspection, prevents wire corrosion and provides a water and contaminant resistant seal Color-coded tubing with wire gauge imprint - Provides easy identification of the correct part for the job Superior integrity of electrical systems - Sealed electrical systems ensure the original integrity of wire connections and wiring harnesses and conforms with OEM standards 89 lbs tensile strength