Elmex Controls Pvt. Ltd. Makarpura, Vadodara, Gujarat

  • Terminal Screw

    Terminal Screw

    Request for Price

    While standard Screw Clamp or Spring Clamp terminal blocks are designed for direct connection of conductors, (solid, stranded, flexible), simply after stripping the insulation, there are other wiring practices and applications where conductors have to be provided with ring type or fork types lugs, for more secured connections.

    ...more
    Get Best Price
  • Terminal Panels

    Terminal Panels

    Request for Price

    The Panel Mounted terminals of elmex range are so designed as to fit on any panel surface. The terminals are stackable and can be fixed on the surface with the help of fixing screws at the end.

    ...more
    Get Best Price
  • Tape Wound Core

    Tape Wound Core

    Request for Price

    These Current Transformers are designed for secondary current of 1A or 5A and the primary current ranging from 5A to 7500A depending on the application of the system load current. Basic Construction in three different Groups, meeting various application requirements: Polycarbonate Encapsulated Rectangular Ring Type CT

    ...more
    Get Best Price
  • solar pv junction box

    solar pv junction box

    Request for Price

    junction box for electrical connection from PV Crystalline module as a solution for easy and reliable interconnection from PV module to DCAC converters. ‘elmex’ Junction Box has simple and cost effective assembly designed with snap fit locking arrangement with IP 65 protection sealing requirement for PV industry.

    ...more
    Get Best Price
  • Solar Panel Junction Box

    Solar Panel Junction Box

    Request for Price

    The junction box is provided with two cables each of 1 meter length with ‘elmex’ male and female EMPV4 connector for simple on-site process.

    ...more
    Get Best Price
  • Solar Junction Boxes

    Solar Junction Boxes

    Request for Price

    junction box for electrical connection from PV Crystalline module as a solution for easy and reliable interconnection from PV module to DCAC converters. ‘elmex’ Junction Box has simple and cost effective assembly designed with snap fit locking arrangement with IP 65 protection sealing requirement for PV industry.

    ...more
    Get Best Price
  • Solar Connectors

    Solar Connectors

    Request for Price

    solar connectors is provided with hexagonal nut for fixing and tightening it on the mounting surface: a rubber o-ring is kept between panel surface and the wall of the photo voltaic devices. ‘elmex’ connector has mating compatibility with ‘elmex’ make straight connector EMPV4.

    ...more
    Get Best Price
  • solar combiner box

    solar combiner box

    Request for Price

    The combiner box is an interface between the array and invertor. This component is very important for the smooth operation of a solar installation. All components are characterized by a high degree of reliability. The robust design enables uninterrupted operation even under unsmooth conditions

    ...more
    Get Best Price
  • Solar Boxes

    Solar Boxes

    Request for Price

    solar boxes has simple and cost effective assembly designed with snap fit locking arrangement with IP 65 protection sealing requirement for PV industry.

    ...more
    Get Best Price
  • slotted channel

    slotted channel

    Request for Price

    slotted channel used have accurate dimensions within permissible tolerances. If the mounting dimensions are less than specified then the attachment of the terminal blocks on these rails will not be strong enough and there could be problems of loose fittings and at times terminal blocks may get dislodged from the channel even in normal service conditions.

    ...more
    Get Best Price
  • shorting link

    shorting link

    Request for Price

    Interconnecting links or shorting links are used to interconnect two or more terminal blocks of same type and at the same potential. it is recommended that factory made shorting links which are designed considering the rated current of the terminal block and its pitch are used for interconnection purpose rather than looping by wire which is not a reliable practice.

    ...more
    Get Best Price
  • screw studs

    screw studs

    Request for Price

    Stud Type Terminals in Melamine Housing are specifically developed for termination using Ring Fork Type Lugs and provide a very reliable connection against vibration. They are available in two types : 1) Screw driver operated 2) Nut driver operated The range covers terminals for conductor sizes from 0.5 sq mm to 35 sq mm

    ...more
    Get Best Price
  • Safety Fuse

    Safety Fuse

    Request for Price

    The fuse holder is made of special grade phosphor bronze and hence offers low contact resistance. A solid brass link type DL4 in place of the fuse makes it possible to use it as a disconnection type terminal block. KUDDF4 is a fuse terminal and a standard terminal block (feed through) combined in one housing, giving cost, time and space economy.

    ...more
    Get Best Price
  • ring type current transformers

    ring type current transformers

    Request for Price

    we are adding instruments transformers, both current & voltage Transformers to our range of product. Group of Current Transformers designed & constructed in compliance with below standards: Transformers have been successfully tested in ERDA, Vadodara for type test as per IEC: 61869-2. ‘elmex’ has set up all the test facilities in- house to conduct all routine tests as well as certain type test.

    ...more
    Get Best Price
  • Power Distribution Block

    Power Distribution Block

    Request for Price

    Distribution blocks are an Innovative Engineering Solution to satisfy customer's needs. They find application in Power Distribution for Control Circuits and can also be used to centralize earthing for the entire panel. These blocks are completely shrouded and accommodate single input and multiple outputs. They replace conventional open Bus-Bars, ensuring perfect continuity

    ...more
    Get Best Price
  • Polycarbonate Meter Box

    Polycarbonate Meter Box

    Request for Price

    electrical industry & providing termination solution for the last five decades & Now serve larger segment of this industry, we are adding instruments transformers, both current & voltage Transformers to our range of product. Group of Current Transformers designed & constructed in compliance with below standards:

    ...more
    Get Best Price
  • Micro Terminal

    Micro Terminal

    Request for Price

    elmex Micro Terminal Blocks are small in size and light in weight, yet functionally same as Standard Terminal Blocks. They are specially developed for installation where space is extremely limited but the same cable density is required as in a normal situation. They can be mounted on TS 15 Rail, which is also smaller, lighter and more economical than TS 32 and TS 35 Rails. The terminals are recommended for use in industries like elevators, automation etc.

    ...more
    Get Best Price
  • marking labels

    marking labels

    Request for Price

    Marking labels are used for identification of circuit connections. Marking of terminals helps in easy identification and quick maintenance. Marking labels are made of Polyamide in white colour and pre-printed with black indelible ink. They are used to serve different purposes like alpha-numeric identification required for accurate wiring and trouble shooting. Marking labels are available in strips containing 10 markers.

    ...more
    Get Best Price
  • Low Tension Current Transformers

    Low Tension Current Transformers

    Request for Price

    low tension current transformers’ has been serving electrical industry & providing termination solution for the last five decades & Now serve larger segment of this industry, we are adding instruments transformers, both current & voltage Transformers to our range of product.

    ...more
    Get Best Price
  • K Type Thermocouple

    K Type Thermocouple

    Request for Price

    A thermocouple is a bi-metallic junction ie a junction between two different metals that produces voltage related to temperature difference. Thermocouples are classified depending on different alloys used for different temperature ranges.Thermocouple terminal blocks are constructed using the same type of metal alloy as that of thermocouple intended for measuring temperature. Thermocouple terminal blocks are used in pairs.

    ...more
    Get Best Price
  • Fuse Terminal Block

    Fuse Terminal Block

    Request for Price

    These Terminal Blocks accommodate a glass cartridge fuse of 5 mm x 20 mm, 5 mm x 25 mm or 6 mm x 32 mm size. The fuse holder is made of special grade phosphor bronze and hence offers low contact resistance. A solid brass link type DL4 in place of the fuse makes it possible to use it as a disconnection type terminal block. KUDDF4 is a fuse terminal and a standard terminal block (feed through) combined in one housing, giving cost, time and space economy.

    ...more
    Get Best Price
  • Fuse Terminal

    Fuse Terminal

    Request for Price

    Applications in Control & Automation require fuse protection facility. elmex offers Terminal Blocks with built-in safety fuse levers. These Terminal Blocks accommodate a glass cartridge fuse of 5 mm x 20 mm, 5 mm x 25 mm or 6 mm x 32 mm size.

    ...more
    Get Best Price
  • Feed Through Terminals

    Feed Through Terminals

    Request for Price

    The proven screw clamp & spring clamp design offers high contact force and is easy to use. The range covers terminals for conductor sizes from 0.5 sq mm to 95 sq mm for screw clamp and 0.5 sq mm to 16 sq mm for spring clamp.Spring Loaded Terminals employ compression springs below the contact clamp assembly, for better and more reliable connection for high vibration applications.

    ...more
    Get Best Price
  • Feed Through Terminal Block

    Feed Through Terminal Block

    Request for Price

    The range covers terminals for conductor sizes from 0.5 sq mm to 95 sq mm for screw clamp and 0.5 sq mm to 16 sq mm for spring clamp. The special foot design provides the slot for easy mounting and removal of a single terminal from the stack, using a screwdriver.

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

Contact Information

Elmex Controls Pvt. Ltd.

  • Mr. J D Ray
  • 12, Gidc Estate, Makarpura, Vadodara, Gujarat

Find Popular Feed Through Terminals Dealers

top