Galaxy Metal Bakkarwala, Delhi

Type : Wire Mesh

Material : Steel

Galaxy Metal has now the privilege of offering the complete range of FRP Induced Draft Counter Flow Cooling Towers for HVAC application and other process industries with unique features. Each Cooling Towers are designed for a particular requirement, facilitating the possible choice for the customer to get the performance with unique operating parameters and site conditions. For customers with special cooling operating requirements, Galaxy Metal can design a range of advance solution with low noise, energy efficient and life cycle cost which ensures high thermal performance complying to the green building initiatives. FRP panels are UV stabilized thereby increasing life of FRP than the normal FRP panels. Fan casing are made of FRP rather than MS which reduces the weight and increases the life span. FRP water basin has 450 mm depth to avoid the air suction in pipe line, a common problem faced by customer. Sufficient lover height to avoid water spillage, even water distribution system and high efficiency uPVC fills are provided for proper heat transfer. Galaxy Metal Cooling Towers are designed for safe, proper and continuous operations and they are easy to operate, maintain, repair and inspect. Cooling Tower structures have adequate strength to withstand wind velocity of 150 km/hr and have earthquake resistant structure.

Condition : New

Warranty : 1 Year

Cooling Type : Counter Flow

Voltage : 380V/50HZ/3PH as usual

Belt profile, or the style and sizes of the belt being integrated. Outside diameter, or the distance across the pulley when measured between groove edges.Center diameter is the distance or distances between the shafts of the pulleys in the transmission. V-belt transmissions are limited by center distances, which must be no more than three-times the diameter of the largest pulley, lest significant slipping can occur. Grooves, the grooves located on the pulley, including the number, and angle and width of the flanges. Pitch diameter, or the diameter of the pulley where the belt is engaged, and is critical to the drives strength-to-weight ratio. Arc of contact, the degree of which the belt wraps around the pulley.

Material : Cast Iron

Principle of sterilization, deodorization : Short wavelength (below 200nm) ultraviolet decomposed 02 molecules to produce ozone 03. UV and ozone has a strong ability to oxidation and decomposition of organic molecules, including odor, UV/03 multiplied with the power to playa strong role in in air purification process.

We are a Delhi(India) based organization involved in offering high quality products to the clients. We are acknowledged for maintaining transparency in our business operations and thus we offer only secured payment processing methods.

Type : Straight

Shape : Round

Material : Copper

Thickness : 0.7mm To 3.0mm

Application : Construction

Material : Stainless Steel

Thickness : 1000 mm -10000 mm

Shape : Rectangular

Our team of quality experts strictly checks the entire range against varied parameters to make sure that they adhere to global quality standards. We are Delhi(India) based organization, affianced in making available the finest lot of products in the market.

Material : Stainless Steel

Thickness : 0.5-1mm, 1-3mm, 3-5mm

Width : 1-100mm, 100-500mm, 500-1000mm

Features: Casing Made out of Pre coated / Galvanized / Power coated sheets Sandwiched insulated drain pan with expanded polystyrene Vibration free, noise less, single phase direct driven motor with Tree way Mixing / Diverting Valves

Type : Chilled Water / Direct Expansion

Application : Comfort Air Conditioning For Hotel, Hospitals, Offices, Class Rooms, Studio, Shopping Malls

Condition : New

Voltage : 220-240 V

Features: Casing Made out of Pre coated / Galvanized / Power coated sheets Sandwiched insulated drain pan with expanded polystyrene Options: Vibration free, noise less, single phase direct driven motor with Tree way Mixing / Diverting Valves

Type : Chilled Water / Direct Expansion

Application : Comfort Air Conditioning For Hotel, Hospitals, Offices, Class Rooms, Studio, Shopping Malls

Condition : New

Voltage : 220-240 V

Capacity : 400 CFM (1 TR) to 1200 CFM (3 TR)

Porosity : 0.3u

Efficiency : H13 & H14

Warranty : 1 Year

Raw materials are the inputs which are used for the production of the finished goods and thus it becomes essential for us to check the quality of the inputs before procurement. Thus, our experts do the needful. We offer secured online and offline payment processing methods. The transaction, done through online mode, is instantly forwarded to the payment system. We also accept bank account transfers, cash payments, etc.

Thickness : 0.17--0.7 Mm

Material : Copper

Over the years, we have catered to the voluminous and urgent requirements of our clients from Delhi(India). Due to our streamlined packaging system, we are capable of meeting both standard and customized packing needs of the clients. Moreover, we make use of quality packaging material.

Type : LWC

Thickness : 0.17--0.7 Mm

Length : 10m-30m

Application : Fire Protection, AC, refrigerator, Heat exchange , fuels,

Material : Copper

Our team members inclusive of quality auditors make complete quality analysis of the product before final dispatch. The offered lot is reckoned for its quality and reliability as it is prepared using the best available resources. Also, we make sure that the material is sourced from the certified places.

Voltage : 220V

Warranty : 1 Year

Our organization has a devoted quality regulation section to make sure our entire range is according to global quality management standards. We are instrumental in offering extensive range of products that is in compliance with the internationally accepted standards. Thus, the final products are of excetional quality.

Warranty : 1 Year

Power : 20 kw

Options: Single/Double Tier Construction Thermal break profile with 25/43/50mm panel thickness Filter sections for EU-5, EU-7, EU-13 in Rigid/Bag construction Heat recovery Wheel/Heat Pipe Humidification, Pre/ Reheat Package Mixing Box with Fresh/Return Air Dampers Weatherproof Light, Limit switch, View glass Plug Fan VFD Drive

Type : Single Skin & Double Skin

Condition : New

Size : Small, Medium

The standard HEPA Filters enables better than Class 100 conditions. These filters can be directly installed in AHUs or mounted in banks in separate single skin plenums.   Following are the construction features of our range: Efficiency 99.99% down to 0.3 u Filter media micro fiber glass Frame material aluminum /GI/SS/MS Frame type box / Flange

Efficiency : 40%-90%@2.0um

Warranty : 1 Year

We are based in Delhi(India) and known for providing amazing deals and lucrative offers to the clients. We have developed a separate unit for keeping a large stock. This unit is managed and maintained by our adroit professionals and fulfills the ever-growing needs of the clients.

Material : Metal

Thickness : 210mm, 180mm etc.

Diameter : 100

Shape : Rounded,Rectangular

Application : Backdraft,Volume Control,Fire Control,Smoke Control

Feature : Rust Proof

Features: Highly suitable for fresh air Specially designed for pharmaceutical Available with pre-filters

Type : Coiling Type, Floor Mounted

Voltage : 380V

Condition : New

Warranty : 1 Year

The entire range, we offer, is manufactured under the strict guidance of the quality experts ensuring zero defect's at buyer's end. Being a client-centric firm, we offer secure payment procedure in both online and offline modes. The procedure is developed by our adroit professionals and approved by the authority.

Thickness : 0.035-1 mm

With us, clients can stay assured for the premium quality of the offerings as we keep them in healthy conditions. For this, we have developed a large storage unit. One can stay assured for high quality of the offered lot as we design and develop it using the best in line raw material and modern work methods. In addition to this, we make sure that the material is sourced from the trusted places only.

Material : Metal

Thickness : 2-5 mm

Length : 10m-30m

Width : 60 cm to 1.20 m

Fine Filters are widely used in pharmaceutical, clean room, semi-conductor, biotechnology, photo film, optical, precision, mechanical, critical, O.T, defense, air handling units and air conditioning etc as secondary or final filter. These filters are resistant to chemicals & organic solvents.   Following are the construction features of our range. Efficiency 95% down to 05 u Filter media synthetic non-woven deep pleated Frame material aluminum GISSMS Frame type box  Flange

Type : Fine Filter

Condition : New

Warranty : 1 Year

Application : For Ventilation and Filtration

Type : Fine Filter

Condition : New

Warranty : 1 Year

Since our strict packaging guidelines, we make sure that the products are suitably packed assuring zero damage during transportation. Furthermore, our packaging professionals thoroughly check the whole batch before making the final transmit. Buyers prefer us for our practice of delivering the orders within the pre-decided time frame.

Features: Casing Made out of Pre coated / Galvanized / Power coated sheets Sandwiched insulated drain pan with expanded polystyrene Vibration free, noise less, single phase direct driven motor with Tree way Mixing / Diverting Valves

Type : Chilled Water / Direct Expansion

Application : Comfort Air Conditioning For Hotel, Hospitals, Offices, Class Rooms, Studio, Shopping Malls

Condition : New

Features: Casing Made out of Pre coated / Galvanized / Power coated sheets Sandwiched insulated drain pan with expanded polystyrene Options: Vibration free, noise less, single phase direct driven motor with Tree way Mixing / Diverting Valves

Type : Chilled Water / Direct Expansion

Application : Comfort Air Conditioning For Hotel, Hospitals, Offices, Class Rooms, Studio, Shopping Malls

Condition : New

Voltage : 220-240 V