Filljet For Spraying Systems
100 Piece (MOQ)
Driven Type : Hydraulic
Color : Grey
Power : 1-3kw
Type : Automobile Spraying Equipment
Weight : 100-500kg
Warrenty : 1yr
arc spray equipment
Voltage : 18 to 50 volts.
This Metal Spray System does not require gases like Oxygen, AcetyleneLPG. It require electrical power and compressed air for metal spray. The metal spray production will be high at lower operating and maintenance cost. The Deposited Coating is more dense and fine. It is a DC current rectifier working on a 3-Phase, 380415440V, 5060 Hertz power supply providing a voltage between 18 to 50 volts. It is normally mounted above the power source and carries the regulators and pressure gauges for the air supply to the spraying gun. One remote control is for stop the operation by operator is attached with control unit by cable.The two wires for the two electrodes for the arc are supplied from two insulated wire spools mounted on a stand. It is for mounting and positioning of Gun in any direction.
Electrostatic Spray Painting Equipment
250,000 - 1,500,000 Per Piece
1 Piece(s) (MOQ)
Voltage : 220-240V
Power Source : Electric
Frequency : 50 Hz
Pressure : 210 Bar
we are one of the major sales & service provider in electrostatic spray painting equipment in the market. Our electrostatic spray painting equipment provides ultimate in transfer efficiency through its state-of-the-art technology, and the ability to spray solvent or water based materials. Our range employs conventional, hvlp & air assisted airless spray systems are extremely robust in build. Our equipment allows maximum saving of atomized paint and gives an excellent finishing quality. availability : available in round pattern and flat pattern special air hose with inbuilt grounding cable. special cabin for water base paint if required benefits : self-diagnostic failure display function full functions of safety detection low voltage cable failure alarm current overload alarm function to keep record of alarms advanced voltage and current control by microcomputer over current relay (ocr) ground failure detection shielded cable failure detection metallic bridge avoidance function attributes : safe manageable paint savings: by wrap-around effect (from 25 to 30 %) faster application time for easy painting high transfer efficiency totally consistent layer thickness perfect coverage of angles overspray elimination protection of the environment voc emission level considerably reduced easier maintenance less booth pollution
Nicotana Spray
800 - 900 Per Piece
500 Piece (MOQ)
Country of Origin : India
Type : Nicotana Spray
Color : Transparent
Brand Name : Teamex
thermal spray equipment
Material : Metal
Condition : New
Coating : Powder Coating
Feature : good adsorption ability, a high rate of the powder
Our stern examination in the raw materials and other inputs help us presenting quality assortment of products. With complete inspection on all materials, we ensure premium quality of products. As we are counted among the reliable names in the industry, we are involved in carrying out a secured payment processing method. We undertake both online and offline methods for the convenience of the clients.
arc spray system
Certification : CE Certified
Weight : 10-50kg
Warranty : 1year
Surface : Polished
Use : Industrial
Size : Available in different sizes
arc spray system
Certification : CE Certified
Voltage : 220V
Power : 1-3kw
Driven Type : Electric
Warranty : 1 Year
Automatic Type : Semi Automatic
After-Sales Service Provided : Spare Parts
painting equipment
We are offering painting equipment ratio 30:1 to 68:1 also plural pump.
Mesto Spraying Equipment
120 Per Piece
Certification : CE Certified
Weight : 100-500kg
Voltage : 220V
Power : 3-5kw
Engine Power : 15-30Bhp
Warrenty : 1yr
Automation Grade : Automatic
Brand Name : Mesto
electric arc spraying system
We have established a name of repute among the Electric Arc Spraying System, Arc Spray, Arc Spray System Manufacturers and Exporters in India. Electric Arc Spraying System is in demand for its rigid construction, precise dimension and reliability. Customers can obtain Electric Arc Spraying System from us in secured packing within a stipulated time frame. Reasonable price has been fixed for the Electric Arc Spraying System we offer. Known For : User friendly design Portable Easy operation Durable Customized
Airless Sprayers Machine
485,000 Per Piece
Type : Airless Sprayers Machine
Application : Paint Spray Gun
Max. flow(L/M) : 8.3
Power source : Gasoline engine
Dynamic power : 6.5HP
Power speed(Rpm) : 3600
Two Component Spray Painting Systems
Type : Spray Painting Machine
Certification : CE Certified
Weight : 150-200kg
Color : Grey
Voltage : 220V
Condition : New
Application : Spray Painting
Surface Finish : Metal Coated
Durability : Long Life
throat spray
150 - 160 Per piece
360 Piece(s) (MOQ)
Our technical and engineering expertise has led us to be proclaimed for the manufacture and supply of premium quality throat infection relief spray. These products are precisely formulated to prevent inflammation of the throat and cure soreness, pain & infections of the throat. Manufactured from the finest materials these products are safe and highly effective. Our fine packaging technology ensures their safe and tamper proof packaging preventing any undesirable quality changes. Thus, we offer the finest tamper proof sprays to our clients. features:
Thermal Spray Systems
Weight : 3.5 Kg
Size : L - 425mm, W - 125mm, H - 200mm
Drive : Pneumatic Motor
ARCJET 96 ® The ARCJET-96 Gun is light and easy to use. It has simple adjustments and requires minimal maintenance. Closed Nozzle System to ensure high bond strength and finespray. Pull Wire Feed System by Air Motor (1000 RPM for high melting wires and 2500 RPM for low melting wires). Forced air-cooled arc-head (patented) to keep air cap, nozzle positioner and spray head cool, thus preventing overheating at high amperes. Compressed air requirement: 35 CFM FAD at 60-80 psig (5bar). Arcjet Power Source New technology for power supply in combination with highly accurate wire feed and modified air cap geometry. Allows controlled and uniform energy transfer onto the wire being sprayed. Flexible energy transfer based on application. Top tilt opening for easy access of control panel.
Airless Paint Spray Tip
850 Per Piece
10 Piece(s) (MOQ)
Automation Grade : Manual
Model Number : RAC tip
Application : Airless spray painting
Brand Name : Rolex Enterprise
Material : ABS Plastic
Feature : Finest quality spray tip Quality performance High efficiency
Cup Volume : 1.9L/min
Graco Spray Painting Equipment
405,000 Per Units
Voltage : 230V
Country of Origin : Made in India
Automation Grade : Semi-Automatic
Usage/Application : Industrial
Brand : Graco
Material : SS
Output Per Cycle : 6000 psi
Pump Lower Output per Cycle : 200 cc
Number of Wheels : 2 Wheels
Kulmec Air Less Spray Painting Equipments
We are KULMEC Painting Equipment, a brand of Ahmedabad Pneumatic. We manufacture painting equipment since last 5 years. Our painting equipment are used in painting structures, ship painting and all the fabricated products.
OptiGun
Whether using Standard or Metallic powders, the 100 kV high performance cascade ensures the optimum results at all times. The OptiGun automatic powder gun is compact and easy to maintain. With color changes, the gun is quickly cleaned and ready to be used again. The nozzles are removed in a flash, they are cleaning-friendly and contain a minimum of parts that are subject to wear. The optional SuperCorona collects and neutralizes the free ions that would disturb the powder deposition on the object
Airless Spray Equipment
We offer airless spray equipment, this system is operates on single phase electric supply. Mainly used for water based paints such as oil bound distember,acrylic emulsion paints & primers,latex,exterior wall emulsion primers & paints. Painting speed is very fast. High pressure paint is developed which passes through tungsten carbide nozzle to get spray. This is portable unit & used for painting building painting from interior & exterior application. Reduces painting time by 70-80 % compared with brush painting. technical specification : 1. Ratio : 1:30 ; 1:45 ; 1:65 ; 1: 75. 2. Fluid output : range 5- 16 litremin. 3. Air press. : 7 kgfcm2. 4. H.p paint hose assembly : max 500 kgfcm2. 5. Paint filter : high pressure. 6. Mounting : trolley mounting.
Wire Arc Spray Equipment
Color : Grey
Warranty : 1 Year
Condition : New
Voltage : 220-460V
Weight : 250
Lead Time : 3 DAYS
Coating : Metal Arc Spray Coating
Model Number : PT-Arc30/400
Packaging Details : PROPER WOODEN PACKING WITH EXTRA SAFEGAURDS
Supply Ability : 100 Unit/Units per Month
Powder Spray Equipment
We are offering powder spray equipment. Acked by a technically trained team of employees, we are engaged in the production & distribution of electrostatic powder spray equipment. Designed & developed by adopting cutting-edge technology, the electrostatic powder spray equipment is much demanded in the global market. We provide the electrostatic powder spray equipment in assorted specifications to cater to the assorted needs of the clients. Highlights in built hv charging systems in barrel assures quick, easy and efficient process enhanced transfer efficiency and reduced wastage due to 100kv built-in electrostatic high voltage generator a powder pathway constructed from wear-resistant material, specially rounded to prevent impact fusion and thus provide a smooth uninterrupted flow. A most easily maneuverable, well balanced and efficient powder coating gun made in a high impact-unbreakable plastic body. We use most advance technology for high voltage generation so that we get : maximum transfer efficiency uniform coating electrostatic powder spray equipment no faraday cage effect trouble free operations the control panel provided on the machine controls the charging voltagepowder out-putair velocity and fluidization of powder. The powder container made in stainless steels, free from the trouble of rusting. The total system is mounted on a movable trolley, so that it can be easily operated any where in the shop. Technical specifications input voltage 230 v + 10 v, 50 hz+ 2% air consumptions 8 cfm at 5 kgcm2 hv out-put 100 kv solenoid voltage 220 v ac hopper capacity 20 kg., 1 no. Fluidizing pressure 3.5 kgcm2 gun 1 no. Gun in-put voltage 220 v ac (max.) polarity negative powder delivery 450 gmmin. (max.)
spray booth equipment
Spray guns designed to combine reliability, versatility and price. Their strength has made them the market leaders since their launch in the 50s. But the strength of a product can be seen by the way it devolps, so, in 1999, the HVLP version of the OM was created to meet the needs of the most sensitive markets in terms of product saving and environmental regulations. The professional IMOM version originated the creation of the UR PLUS version, with brass components which, considering the qualityprice ratio, makes the product also suitable for D.I.Y.
spray booth equipment
Color : white
Features : Robustness,Easy in installation,Serves a longer service life
Graco Spray Painting Equipment
80,000 Per Piece
Warranty : 1 Year
Weight : 25 kg
Voltage : 240 V
Power : 1300 W
Automation Grade : Automatic
Product Type : Airless Spray Paint
Brand : Namah
Pressure : 25 MPa
Spray Painting Equipment
Graco's two- and three-component proportioners offer precise and reliable electronic plural component proportioners for a broad range of solventborne, waterborne, and acid catalyzed materials. From entry level to upgraded applications, the ProMix 2KS and 3KS systems provide flexibility and increased efficiency.
Spray Painting Equipment
We provide a wide range of high speed Spray Painting Equipment that includes Bullows Spray Painting Booths Bullows Re-finishing (Spray cum Bake) Booths Bullows Industrial Parts Cleaning Machines Bullows Spray Painting Equipments State of Art Equipments From World leaders ITW Finishing System representing Binks, Devilbiss & Ransburg, Hubner & Hosco. Our Industrial Spray Painting Equipment is manufactured from the optimum quality raw materials that assure high performance. Easy to use, our Industrial Spray Painting Equipment needs low maintenance cost. We have carved a niche as one of the booming Spray Paint Equipment Manufacturers based in India.
spray tip
220 Per Pack
01 Pack (MOQ)
Packaging Type : Packet
Brand Name : Rust-Oleum
Application : Industrial Use, Domestic Use
Spray Painting Equipment
Pneumatically sensed stall free Air Motor High Flow Rate Stainless Steel rust proof Hydraulic Body Easy Maintenance Ice Free Air Motors Light and Easy to handle Compliance to EC Norms
paint spraying equipment
Paint spraying equipment from App pumps is highly efficient machine which makes spraying easier and faster. We have various ranges of Spray Painting Machine which has the high capacity cooling system that allows easy spraying which can be applied at residences, industrial and commercial places. The high efficient hydraulic pump in the spraying equipment works faster and it’s fewer moving parts for easier maintenance and long time. All the models for paint spraying equipment are quickly and easily convertible from gas to electric without tools. These Spray Painting Machines are highly demanded by the clients owing to their optimum quality and timely delivery at client’s end.
Spray Painting Equipment
High viscosity, solventless, low solvent coating, semi-solid coating, marine coating, etc. The Heavy Duty Airless Spray Painting equipment offered by us has been widely appreciated by the customers and is being widely used in various industries. Pneumatically sensed high performance Air Motor, Stainless Steel rust proof Hydraulic Body.