Hvd Distributors Pvt. Ltd. Masjid Bunder, Mumbai, Maharashtra

We are offering high quality Thrust Ball Bearings, which are classified into flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). These Thrust Ball Bearings can sustain axial loads but not the radial loads. For single-direction, Thrust Ball Bearings with pressed steel cages and machined brass cages are usually used. The cages in double-direction Thrust Ball Bearings are the same as those in single-direction ones with same diameter series.Highlights : Durable Superior finish Smooth performance Corrosion free

We are instrumental in offering Tapered Roller Bearings. The Tapered Roller Bearings are precisely engineered to manage both thrust and radial loads on rotating shafts and in housings. We make available Tapered Roller Bearings in single, double and four-row tapered roller bearing configurations. Also, we specialize in providing Tapered Roller Bearings in customized geometries and surfaces. Tapered Roller Bearings consist of : Cone, or inner ring Cup, or outer ring Tapered rollers, or rolling elements Cage, or roller retainer

We are offering Spherical Roller Bearings in different types such as EA, C, CD, CA, which are designed for high load capacity. The type EA, C and CD of Spherical Roller Bearings have pressed steel cages and type CA has machined brass cages. Type EA of Spherical Roller Bearings has especially high load capacity, features low torque, and has a high-strength cage. An oil groove and holes are provided in the outer ring to supply lubricant and the bearing numbers are suffixed with e4. To use these Spherical Roller Bearings with oil grooves and holes, it is recommended to provide an oil groove in the housing bore, since the depth of the groove in the bearing is limited.

this type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads. however, depending on the surrounding structure, such an angle may not be possible.

Our company holds expertise in offering Robotic Arm Bearing. Our Robotic Arm Bearing consists of two thorough hardened or induction hardened standard bearing steel races (Rings), a special polymer spacers and complement of super precision steel balls. The Robotic Arm Bearing is widely applauded for increased load capacity and stiffness in moment loading. Also, it is highly durable in nature owing to its high grade fabrication. Further, Robotic Arm Bearing can also be provided with specially designed spring steal seals as per the requirement. Sizes Available : Up to 300mm

Bore Size : 3 mm - 600 mm (0.12 inches - 23.62 inches)

Material : Chrome Steel, Stainless Steel

Pilled Ground Plated Bars that we are offering are plated with chrome and offer smooth finish and high oxidation resistance. These Pilled Ground Plated Bars are used in pneumatic hydraulic cylinder shaft, column, plastic injunction & blow molding machine, fitness equipment auto machine and precision shaft. These Pilled Ground Plated Bars are used as a component in various machines like hydraulic & pneumatic cylinders, plastic molding machines, paper manufacturing machines, etc. Our Pilled Ground Plated Bars are appreciated for dimensional accuracy, high strength, precise finish, high tolerance, etc. Features : Material : en-8 d c-45 (other material like en.9 en.l 9en.24 etc. Can be used) as per customer requirement Standard Size : 8mm to 150mm above 150mm can be ordered Standard Length : cut to customer length up to 7000mm hard Chrome plating thickness : 25 to 30 micron Surface roughness : better than ra-0.2. Chrome surface hardness : 850 to 1000 hv Straightness : 0.1 per meter max. OD tolerance

extremely thin-section ball bearings and roller bearings contributing to downsizing, weight saving, and reduction of torque loss of robots, construction equipments, and industrial machinery..

We are offering harden ground plated bar. usage : shaft for l.m. Bearing piston rod for earth moving equipment shaft for fitness equipment guide pillar, side rail. material : c-45 en-9 en-19 en-31 or as per customer requirement std size :10mm to 100mm. Above 100mm can be order std length : cut to customer length up to 7000mm hard chrome plating thickness : 20 to 25 micron surface roughness : 0.2 ra surface hardness : 60 hrc + 2° chrome surface hardness : 850 to 1000 hv straightness : 0.1 per meter max. od tolerance : h8 f7 g6. note: complete machining on induction harden bar can be done as per customer requirements like threading kew way drilling tapping on face dia

Thickness : 25 to 30 micron

Length : Up to 7000 mm

We are offering supreme quality Hard Chrome Plated Bars. The Hard Chrome Plated Bars are fabricated using optimum grade metal and latest machinery. The bars undergo rigorous processes like pilling, straightening, induction hardening, grinding, polishing, hard chrome plating and finishing under the supervision of experienced engineers. Hard Chrome Plated Bars find usage in Shaft for L.M. Bearing / Piston Rod for Earth moving equipment, shaft for fitness equipment Guide Pillar and Side Rail. We provide Hard Chrome Plated Bars in different specifications at very feasible prices.

Our organization is well acknowledged for providing the best quality Float On Castors. Precisely manufactured in different specifications, our Float On Castors are fabricated using high grade material by the experts. They are widely acclaimed for fine finish, lightweight and high durability. Further, Float On Castors are used for easy handling of other flat sheet materials i.e. granite, wood, plastic, paper, card, etc.

We are offering high quality Castor Wheels that are widely installed in manually or automatically operated trolleys. These Castor Wheels are appreciated by the clients for durability, smooth performance and high strength. These Castor Wheels can withstand heavy loads with ease. Our range of Castor Wheels is specifically designed to be installed in chairs, trolleys, material handling equipment, etc., for providing ease of movement. Highlights : Highly durable Rigid construction Withstand heavy loads Smooth performance

We are offering Flat Mounted Table Bearings that offer a link between mobile elements. An alternate base must have a capacity to transmit the stresses of a mobile towards a base. It is necessary to accurately define all the actual stresses applied so that a bearing can be selected. Flat Mounted Table Bearings are available in sizes up to 300mm. Flat Mounted Table Bearings consist of two thorough hardened or induction hardened standard bearing steel races (rings), a special polymer spacers and complement of super precision steel balls. The specially designed raceways increase load capacity and stiffness in moment loading while guaranteeing high precision long service lifetime and very low coefficient of friction. These Flat Mounted Table Bearings can also be supplied with specially designed spring steal seals depending upon application. These bearings make it possible to reduce the size of many precision rotary bearing systems. These Flat Mounted Table Bearings can replace a double back or face mounted angular contact bearing pair at a substantial savings of space and cost.   Features : Assembly is done as per standard and guidelines for ball bearings Operating temp of an outside diameter up to 300mm is generally heat treated to retain dimensional stability up to 120oc Higher operating temperature require special heat treatment lubrication Bearings are delivered with durable lubrication according to application Greasing must be carried out during rotation at low speed through greasing nipple at a frequency of every 500 hrs during normal usage Greasing is required before & after a long idle period Delivery of these bearings are supplied duly wrapped in special corrosion preventing and moisture repelling paper along with durable lubrication Our products have 12 months warranty (for manufacturing defect) from the date of supply Their assembly requires particular caution. Any action of dismantling bearings or replacement of any elements is definably inadvisable and cancels the warranty. Special environment in case when the working environment is particularly aggressive : Sea atmosphere Dusty & abrasive environment particularly protection devices must be incorporated such as labyrinths, shields and oil bath.

Weight : 212.621 gm

Leveraging to our team of skilled engineers and modern technology, we are offering precision engineered Deep Groove Ball Bearings. They feature deep, uninterrupted raceway grooves. These raceway grooves have a close osculation with the balls. The Deep Groove Ball Bearings are simple in design and suitable for high and even very high speeds. We make available Deep Groove Ball Bearings in many designs, variants and sizes.

Whether used for loading or feeding machines, moving goods or materials, as an alternative to a castor or in a form of linear operation, Ball Transfer Unit provides an essential service. There are many possible applications of Ball Transfer Unit like it is used where loads need to be moved smoothly, precisely and with minimum effort in any direction. Some typical applications of Ball Transfer Unit includes cargo and baggage handling, assembly lines, as a castor, machine loading, sliding-door systems, machine tables, etc.Highlights : Superior finish Smooth performance Corrosion free High strength

Angular Contact Ball Bearing consists of an inner ring along with an outer ring, ball, and a cage which contains and separates the ball. Angular Contact Ball Bearings have been specifically designed with a contact angle so that they can sustain significant axial loads in one direction together with radial loads. Furthermore, as an axial component is generated when a radial load is applied, these Angular Contact Ball Bearings are used in pairs, triplex sets, quadruplex sets, or multiplex sets. Highlights : Precision design Smooth performance Highly durable Perfect finish

We are engaged in offering Cylindrical Roller Bearings that are in linear contact with the raceways. These Cylindrical Roller Bearings have high radial load capacity and are suitable for high speeds. There are different types Cylindrical Roller Bearings designated as NU, NJ, NUP, N, NF (for single-row bearings), NNU, AND NN (for double-row bearings depending on the design or absence of side ribs). The outer and inner rings of all types are separable. Some Cylindrical Roller Bearings have no ribs on either the inner or outer ring, so the rings can move axially relative to each other. These Cylindrical Roller Bearings can be used as free-end bearings. Cylindrical Roller Bearings, in which either the inner or outer ring has two ribs or the other ring has one, are capable of taking some axial load in one direction. Double-row Cylindrical Roller Bearings have high radial rigidity and are used primarily for precision machine tools. Pressed steel or machined brass cages are generally used, but sometimes molded polyamide cages are also used in these Cylindrical Roller Bearings.