hi nuc engineering pvt ltd Isanpur, Ahmedabad, Gujarat

  • W Axial Shaft Seals

    W Axial Shaft Seals

    Request for Price

    The DMRT Type W Mechanical Seal consists of two identical steel rings and rubber belleville washers. The seal operates by preloading the two rubber washers and fl oating the two polished steel faces between them within the seal chamber

    ...more
    Get Best Price
  • SPECIALIZED BLOWERS

    SPECIALIZED BLOWERS

    Request for Price

    Special blowers vary in design, parts material, connections, the direction of air flow or they are used for other gases and mixtures. Their design meets non-standard customer requirements in projects where the use of the basic range is not possible. One of the most common application for special blowers is biogas. Production, purification and processing of biogas and the subsequent production of electricity is a growing segment of the market across Europe. In Germany alone there are currently more than 6,000 biogas plants with total installed capacity of 2.3MW. Blowers produced according to ATEX directive 94/9/EC are supplied mainly in a classification II 3G IIA T3.

    ...more
    Get Best Price
  • Slide Gate Valves

    Slide Gate Valves

    Request for Price

    Design Features Benefits Full bore ody construction. Free medium flow. Clear pass for maintenance and diagnostic equipment. Seats with double sealing (primary - «metal to metal», secondary - «metal to elastoplastic»). Extended service life. Corrosion-resistant gate. Protection of the trim from abrasive wear-out and line medium deposits. Drain pipe inside gate valve. Removal of sediments containing hard admix. Removable polyurethane ring gaskets and clamp connection "body-to-cover". High level of maintainability and serviceability. Usage of thermo expanded graphite for sealing gland. Less stem friction wear-out. Extended service life of the element.

    ...more
    Get Best Price
  • Single Spring

    Single Spring

    Request for Price

    Daemar offers a full range of Single Spring "Pusher" Mechanical Seals. Including the standard Types A, B, C, D and E. Which are equivalent to type 6, 6A, 21, 2, 1.

    ...more
    Get Best Price
  • SDT BLOWERS

    SDT BLOWERS

    Request for Price

    Since January 2011 LUTOS has offered a new range of energy saving screw blowers. The new LUTOS screw blower packages are based on screw compressor elements, which are due to the simple concept of their design and high reliability the most popular source of compressed air. In addition to 35% energy savings they also offer lower noise, high efficiency direct motor drive and reduced vibration and pulsation in the pipeline. The blower is supplied with an electric motor and on request can be supplied complete with an acoustic enclosure. * Average savings at pressure of 100 kPa.

    ...more
    Get Best Price
  • Saunders Welded Tandems and Manifolds

    Saunders Welded Tandems and Manifolds

    Request for Price

    The most common customized valve concept is the tandem valve or valve and fitting combination. A main valve is ported and a section of tube is welded to the port to create an access point into the valve. This tube can in turn be welded to a second valve forming a two-valve cluster, or the tube can be turned into a weld end, hygienic clamp or other type of fitting. The resultant product is designed to optimise drain ability and meets standard process considerations including camp’s for dead leg minimisation.   Size Range: DN15 – DN 150 ( ½” – 6”)   End Connections: A wide range of end connections is available. Please contact us for the full range.   Typical Applications: Product transfer purging, steam sterilisation, condensate drains, CIP systems  

    ...more
    Get Best Price
  • Saunders Standard Machined Block

    Saunders Standard Machined Block

    Request for Price

    Machined integrally from a block, the Machined T Valve normally features three common ports with the same bore dimensions and incorporates a valve body and a tee fitting into a single solution. Machined    T valves form the ideal solution for feeding laterals off recirculating loops, sample points or use-point applications. The bodies can be supplied with weld or hygienic clamp end connections or included U-bend configurations for point of use.

    ...more
    Get Best Price
  • Saunders IDV Diaphragms

    Saunders IDV Diaphragms

    Request for Price

    As the innovator and leader in diaphragm valves, we continually develop our diaphragm technology and remain the only manufacturer to have complete ownership of the research and development, design and production involved. Saunders® offers a full range of diaphragm selections engineered to meet the exacting demands of our industrial customers. All grades of rubber and PTFE have been developed to suit individual customer requirements and are proven, even in the most arduous environments. All Saunders® diaphragms are made from high quality materials and are manufactured in-house to strict quality standards. This is borne out by the fact that all diaphragms are fully traceable in accordance with EN10204 3.1. This gives our customers the assurance of consistent, reliable and repeatable quality resulting in consistent, reliable and repeatable process performance. To assist in the selection of the best diaphragm materials please use the Saunders® material selection program or alternatively, please feel free to contact our customer service group, who will be happy to assist you with the best recommendation for your application

    ...more
    Get Best Price
  • rubber lined

    rubber lined

    Request for Price

    Available in both weir and straight through designs and with a number of lining options to suit both aggressive and abrasive line service. * A Type DN20 - 500 (3/4" to 20") * KB Type DN20 - 350 (3/4" to 14")

    ...more
    Get Best Price
  • Revo Automation

    Revo Automation

    Request for Price

    We supply you with complete modules consisting of valves, actuators and accessories. We are independent from manufacturers and brands. On the basis of your specifications we combine valves of any design with pneumatic, hydraulic and electric quarter-turn and linear actuators. The required range of accessories spans from Limit Switches, Solenoid Valves, Positioners to the interface of bus-systems. The Revo Actuator meets interfaces according to Namur and DIN ISO 5211.

    ...more
    Get Best Price
  • Quarter Turn Actuators

    Quarter Turn Actuators

    Request for Price

    The Revo Series R range of actuators is ideal for operating quarter-turn valves, especially butterfly, ball and plug valves. Typical applications are 90º or 180º rotary motion and Multiposition function. The linear counter movement of the pistons is transmitted into the required 90º travel by means of the integrated racks of the pistons and the pinion. All Revo actuators are suitable for on/off or modulating control operations. Double-acting actuators are operated by air in both directions (open and closed) whilst single-acting actuators can be supplied with springs to open or close. On air failure these will then go into a fail-safe position.

    ...more
    Get Best Price
  • Portable Tritium in Air Monitor

    Portable Tritium in Air Monitor

    Request for Price

    Compensation for Gamma background is crucial in tritium measurement, since a gamma field of 1mR/Hr will generate 500 times the ionization generated in 1µCi/m³ of tritium. Tyne designed the four, 250 cc ion –chambers in a cruciform with each chamber connected to an ultra sensitive electrometer amplifier and filter. All signals pass through the ADC converter, and the micro-processor calculates and displays the tritium value. To cover high ranges of tritium a separate small ion chamber is used. Measurements such as flow from the solid-state flowmeter and chamber temperature are also monitored by the micro-processor. Instrument output includes analog (0-5V, 4-20mA); relay alarm contact (30VDC, 1A) for operation of external equipment; and communication (RS232/RS485) to enable downloading or recording of information onto a computer. The TFT full color LCD display mounted on the surface plate clearly displays instrument readings in both digital and graphic format to show real time measurements and trends. The well balanced, easy-to-carry instrument can be placed on its end for easy visibility of the touch screen monitors to operators working away from the instrument. Batteries installed in the handle are easily replaced. A powerful long-life pump can be used to draw air through a 10 meter tube. This allows the instrument to be used to measure the inside of rooms without the need to enter the room.

    Accuracy : ±3µCi/m³ from 1 to 100µCi/m³, ±10% from 100µCi/m³ to 20,000 µCi/m³

    Power Supply : 2.5 V- 5V external power supply, or 3 C-cell battery. Total power consumption is 150mA.

    Response Time : 30 seconds at 90% of signal

    ...more
    Get Best Price
  • Plastic Lined

    Plastic Lined

    Request for Price

    Available in the weir type design and with a number of lining options to suit corrosive line service. * PFA DN15 - 100 (1/2" to 4") * PP & ETFE DN20 - 150 (3/4" to 6") * PTFE DN150 - 250 (6" to 10")

    ...more
    Get Best Price
  • Peristaltic Pumps

    Peristaltic Pumps

    Request for Price

    ELRO® Peristaltic Pumps can be fitted with a variety of accessories, even in the field of automation. The range of accessories comprises coupling systems, suction and discharge hoses, various suction strainers, disc strainers, vacuum strainers and suction pipes. Active and passive pulsation dampeners are also available for the peristaltic pumps in a variety of material combinations. be equipped with mechanical and electronic switching equipment, sensors, early warning systems, heating, dosing and filter press controls for monitoring purposes, open loop and closed loop control.

    ...more
    Get Best Price
  • o-ring kits

    o-ring kits

    Request for Price

    A wide variety of O-rings are standard in our kits, giving you the flexibility and the versatility to find the right fit for your situation. Daemar's o-ring kits offer convenience and easy use, making them the ideal solution for maintenance applications. These kits are effective tools in reducing costs for maintenance and assembly staff by eliminating the guess work in part selection and saving time in part sorting.

    ...more
    Get Best Price
  • Molded O-rings

    Molded O-rings

    Request for Price

    The O-ring is a simple and versatile seal that can be used in thousands of applications. O-rings are manufactured in a wide variety of compounds to suit your every need. Static Sealing Most O-Rings are used in static service (the O-Ring and metal surfaces remain relatively fixed). They may be applied as face seals or radial seals. In face seal applications, the O-Ring should seat against the low pressure side of the groove. Dynamic Sealing The O-Ring moves relative to the mating surface. A moving seal may be further classified by the type of motion: reciprocating, oscillating, or rotating. The greatest number of dynamic seals are used in reciprocating service in cylinders, valves, and linear actuators. Oscillating motion is encountered in swivels and valve stems. When an O-Ring is used on a rotating shaft, it should be limited to light duty where the shaft speed is low and some fluid bypass is acceptable. Materials Buna-N, Viton, EPDM, Silicone, PTFE, Polyacrylate Durometer Selection 70-durometer hardness should be used wherever possible as it offers the best combination of properties for most O-Ring applications. Softer compounds stretch easier and seal better on rough surfaces. Harder compounds offer greater abrasion resistance and resistance to extrusion. Sizing Systems AS568 Dash Sizes - Inch Sizes Standard inch sizes ranging from 1/32" I.D. to 26" I.D. AS568 Dash Size Chart Boss Tube Fittings O-Ring sizes for Boss Tube Fittings are available in both 70 & 90 Durometer. These O-Rings are used in applications to provide a seal for straight-thread tube fittings on a boss. Numbering System: The two digits after the -9 represent the Tube Size O.D. in 16ths of an inch. For example -905 is sized for a Tube O.D. of 5/16". The one exception is for -901 where the Tube Size O.D. is 3/32". Boss Tube Fitting O-Ring Size Chart Metric Sizes Standard metric sizes ranging from 1.50mm I.D. to 499.30mm I.D. Metric O-Ring Size Chart

    ...more
    Get Best Price
  • Mechanical Seals

    Mechanical Seals

    Request for Price

    Daemar delivers a range of Mechanical Seal solutions from the standard Types A, B, C, D and E.  Daemar can also supply custom seals such as our new Type W Axial Shaft Seal.

    ...more
    Get Best Price
  • Glass Lined

    Glass Lined

    Request for Price

    Glass - Specialist blue borosilicate lining available in both weir and straight through designs. * Cast Iron / Glass DN15-350 (½" to 14")

    ...more
    Get Best Price
  • DT V BLOWERS

    DT V BLOWERS

    Request for Price

    The blowers for vacuum to minus 500mbar are based on the DT blower packages. The blower is additionally equipped with a vacuum valve which protects the blower from overloading. These blower can be used in vacuum pneumatic transport, paper and printing industries, agriculture, industrial vacuum cleaners, etc.

    ...more
    Get Best Price
  • DT BLOWERS

    DT BLOWERS

    Request for Price

    Is the most popular LUTOS blower package, including complete accessories already in the basic price: - DI blower with three-lobe rotors - Supporting frame with outlet silencer - Silencer and air filter - Belt drive, including belt guard if the package is not assembled with sound enclosure - Safety valve - Start-up on bigger sizes - Check valve - Compensator - Filter clogging Indicator - Pressure gauge Blower packages can be supplied including fully connected electrical control unit and variable speed drive

    ...more
    Get Best Price
  • DMRT Quad-Ring Kits

    DMRT Quad-Ring Kits

    Request for Price

    36 sizes and 226 rings. Sizes ranging from 006 (1/8" ID, 1/16" width) up to 327 (1-3/4" ID, 3/16" width). Buna 'N' material.

    ...more
    Get Best Price
  • DMRT Metric O Ring Kit

    DMRT Metric O Ring Kit

    Request for Price

    32 sizes and 401 rings. Sizes ranging from 3mm ID and 1mm width up to 35mm ID 5mm width. Buna 'N' material.

    ...more
    Get Best Price
  • DMRT Boss O-Ring Kit

    DMRT Boss O-Ring Kit

    Request for Price

    DMRT Boss O-Ring Kit 20 sizes and 212 rings. Sizes ranging from the Boss 901 up to the 932. Buna 'N' material.

    ...more
    Get Best Price
  • DI BLOWERS

    DI BLOWERS

    Request for Price

    DI lobe blowers are used for special applications. DI elements can be used as a truck blower or a stand alone element driven by an existing engine.

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
Hi-Nuc Engineering Pvt. Ltd. was established in the year 2008 under the leadership of Mr. Saumil Bhayani to focus to demands of the Nuclear Power Industry in India With the growing demand for the market demanding quality products Hi-Nuc Engineering Pvt. Ltd. forged alliances with companies of international repute like Crane, Saunders ,Crispin, Lutos to become one-stop-shop for catering to the demand for the industries in India. Hi-Nuc Engineering Pvt. Ltd. have clearly established themselves as a partner of choice for the Industries .With an ambitious growth path chartered out we are continuously on the lookout for alliances that can cater to the unfulfilled demand in All over Indian Market.
Infrastructure
We cater to the Region through a centrally located and amply staffed office at Ahmedabad which also has a service center and warehouse. The office has 8 Support staff and 3 field sales engineers and 2 service and technical support staff for customer support.
Infrastructure
Name of Managing Director
Mr. Saumil Bhayani
Year of Establishment
2008
Nature of Business
Suppliers, Importer & Service Provider
Number of Employees
10-20
Annual Turnover
INR 1200 Lakhs /Annum
Market Covered
All over India Nuclear Sector
BUSINESS ASSOCIATES:
OJSC Atommashexport “Russia” Make Valves
ALFA LAVAL Heat Exchangers
JSC TIH Gidromash “Russia” Make Rotodinamic & Centrifugal Pump.
JSC “NPP” “AVTOMATICA” “Russia” Make pH Conductivity Analyzer.
The PTPA LLC “ Russia” Make Bellow sealed Gate / Globe valves.
Tenzor Plant- “Russia” Make Fire safety Equipments.
Interarm “Russia” Make Specialized Nuclear Valves.
VNIIA “Russia” Make Pressure Transducers & relays.
Intra “Russia” Make Radioactive Monitoring System.
CKBA “Russia” Make Nuclear Shut Off/Safety valves.
Kabex “Russia” Make Cables & it’s Accessories.
CJSC “ Diaprom ” “Russia” Make Specialized Nuclear Sensor & transducer.
TYAZHMASH “Russia” Make Vibration Dampers/Hydraulic Shock Absorbers.
TEHNOPRIBOR “Russia” Make Conductivity & Concentrate Meter.
Sigma “Czechrepublic” Make Cooling Water Pumping Station/ Main Coolant Pump in Primary Circuit.
Armatury “Czechrepublic” Make Gate/Globe Check & Butterfly Valves.
Lutos “Czechrepublic” Make Specialized Nuclear Blower.
Daemar Inc., “Canada” Make O-rings & Mechanical Seals
Tyne Engineering Inc., “Canada” Make Tritium Monitor
Sentry Equipment Corp. “USA” Make Sampling Panels.
T.G. FILTER s.r.l. Make Industrial Computers.
Kishor Pump “India” Make Watering & De-watering Pump.
Ashcroft India Pvt. Ltd., Make Pressure Gauges.
Gerb S A “France” Make DG System spring.
Crispin Mfg. “U.S.A.” Make Air release valve
M.M.V.I. Srl “Italy” Make Metal Seated Butterfly valve.
Saunders “United Kingdom” Make Diaphragm Valves
Crane “India” Make Butterfly Valves, Pneumatic Actuators & Peristaltic Pump.
Key Concept
Servicing & Supplying hi-tech and Imported Engineering Equipment & Instrumentation Equipments to Large & Medium Scale Industries.
Constant Service Back Up.
Read More »

Contact Information

Hi Nuc Engineering Pvt Ltd

  • Hi Nuc Engineering Pvt Ltd
  • FF-18, Sardar Complex, Opp. Bhagvan Nagar, Nr. Govind vadi, Isanpur, - 382443. , ., Ahmedabad, Gujarat

Find Popular Mechanical Seals Dealers in Ahmedabad

top