Jewel Clean System Andheri West, Mumbai, Maharashtra

  • wire cleaning system

    wire cleaning system

    2,500,000 Per Piece

    Get Best Price
  • Wire Cleaning Machine

    Wire Cleaning Machine

    Request for Price

    Requests for cleaning processes in the wire industry are continuously increasing and at the same time with increased quality requirements. Cleaning is the removal of contaminants present on the surface of the wire but not.chemically.linked.to.it. Cleaning is used for stainless steel, low and high carbon steel, aluminum alloy, copper wire to remove calcium and sodium parts lubricant residues after the dry drawing process, or lubricant oil from a wet drawing machine or forming process etc. Two types of technologies are usually proposed for this purpose: ultrasonic cleaning and electrolytic cleaning. Both of them have advantages and have to be chosen carefully depending on the type of wire and the type of products to be removed from the wire. Let’s compare briefly the two technologies. Ultrasonic cleaning is the use of high frequency sound waves. This results in cavitation, in which micro-size bubbles form, grow and implode due to alternating positive and negative pressure waves. Just prior to the bubble implosion, there is a tremendous amount of energy stored inside the bubble itself. The implosion event if it occurs near a hard surface changes the bubble into a jet which travels at a speed of approximately 400km/h towards the hard surface. Because of the inherent small size of the jet, ultrasonic cleaning has the ability to reach into small crevices.and.removed.entrapped.soils.very.effectively. The basic components of an ultrasonic cleaning system include some ultrasonic transducers, an electrical generator.and.a.tank.containing.the.cleaning.solution. The ultrasonic generator converts a standard electrical frequency of 50 or 60 Hz into the high frequencies required. The higher the frequency, the smaller the bubbles created during the cavitation will be. The transducers are constituted of PZT elements (Pb-Zr-Ti) which converts the electrical energy into mechanical vibrations by piezoelectric action. The transducers are installed inside a watertight box made in stainless steel immersed in the cleaning bath and located some centimeters below the wire field. A watertight cable connects the transducer holding box to the generator.The cleaning solutions used in the ultrasonic cleaning lines have to be chosen with care taking consideration of the type of wire and the application. Generally speaking for the majority of the applications in the wire industry, alkaline solutions are preferred to remove oily matter and phosphoric acid  based solutions are preferred to remove stearate soaps. The working temperature has a profound effect on ultrasonic cleaning effectiveness. In general higher temperatures will result in higher cavitation intensity and better cleaning. However, if the solution temperature too closely approaches the boiling point of the solution, the liquid will boil in the negative pressure areas of the sound waves, reducing or eliminating the cavitation effect. We usually work around 60°C (140°F) which offers an excellent compromise. In the electrolytic process, the wire passes through an electrolyte in a processing zone divided into different chambers. Electrodes are located in each chamber and adjacent electrodes are connected to opposite poles of a direct current supply source. Electrical current is constantly passing between the electrodes in the adjacent chambers through the electrolyte and the wire while it is traveling through the chambers in the processing zone. In this way, the wire is alternately polarized negatively and positively as it travel through the processing zones. The migration of ions of the electrolyte as a result of the polarization will allow some chemical reactions to take place quickly at the surface of the wire like hydrogen or oxygen bubbles formation. Those bubbles created at the surface of the wire will remove by a mechanical effect the dirt present on the wire. 

    ...more
    Get Best Price
  • wax injector machine

    wax injector machine

    Request for Price

    This is made in India this is used to make wax pieces it is local and effective machine in the market.   Specifications: Capacity of 2kg wax and MS body coated with aluminum tank with two nozzles Digital Display It has a 220v and 1.2kv power with 6amp single phase Max 85°c with water temperature 72° to 74°

    ...more
    Get Best Price
  • Vapour Degreasing System

    Vapour Degreasing System

    Request for Price

    Thee Stage Ultrasonic Vapour Degreaser:  Vapour Degreasing System enhances cleaning speed and effectiveness where high degree of cleaning is required. These systems save energy, man power,  space consumables and hence mostcosteffective.How does it work?The components are first cleaned in pre-cleaning chamber for removal of gross contaminates, followed by vigorous ultrasonic agitation. Then the components are held in vapour chamber for vapour condensation.to.remove.the.residual.contamination.As the components reach the vapour temperature the condensation stops and components come out clean and dry.  For efficient solvent recovery, water is circulated in the condensing coils. The system comprises of two, three or four chambers depending upon the level of contamination and degree of cleaning required. Units are also available with direct refrigeration cooling systems, distillation plants, filtration plants and fume extraction systems.

    ...more
    Get Best Price
  • ultrasonic wire cleaning machine

    ultrasonic wire cleaning machine

    Request for Price

    Requests for cleaning processes in the wire industry are continuously increasing and at the same time with increased quality requirements. Cleaning is the removal of contaminants present on the surface of the wire but not.chemically.linked.to.it. Cleaning is used for stainless steel, low and high carbon steel, aluminum alloy, copper wire to remove calcium and sodium parts lubricant residues after the dry drawing process, or lubricant oil from a wet drawing machine or forming process etc. Two types of technologies are usually proposed for this purpose: ultrasonic cleaning and electrolytic cleaning. Both of them have advantages and have to be chosen carefully depending on the type of wire and the type of products to be removed from the wire. Let’s compare briefly the two technologies.

    ...more
    Get Best Price
  • Ultrasonic Pcb Cleaning Machine

    Ultrasonic Pcb Cleaning Machine

    Request for Price

    We are among the established names in the industry, engaged in offering Industrial Industrial Ultra Sonic Cleaning Machin for our vaulable customers. TheseIndustrial Ultra Sonic Cleaning Machine can be easily available at market attractive affordable price. Our Industrial Ultra Sonic Cleaning Machine is made using quality stainless steel procured from authentic vendors of the market.

    ...more
    Get Best Price
  • Ultrasonic Cleaning Machine

    Ultrasonic Cleaning Machine

    Request for Price

    Above ultrasonic cleaning machine is 750 watts . Its cleaning for plating purpose , brass cleaning , ornaments , immitations , watch strap , dentiest , spectacals , bearing , etc.

    ...more
    Get Best Price
  • Ultrasonic Cleaner

    Ultrasonic Cleaner

    Request for Price

    Ultrasonic cleaners offered by us are precision designed using advanced electronic circuits /Solid States (Transformer) so as to take care of cleaning of all jewellery. Transducers mounted at bottom of tank also generate strong vibrations to ensure perfect cleaning. A ball valve provided at side bottom also helps in easily emptying the used water, whenever required. Built Heater for through cleaning.   Features: Thermostatically controlled by heater keeps water hot at preset temperature throughout use. Digital Ultrasonic also available. Jigs for suspending jewelery pieces can be supplied along with machine. (At Extra Cost.) Ultrasonic cleaners available in other special sizes can be supplied on demand Diamond Baskets are available.

    ...more
    Get Best Price
  • transducers

    transducers

    Request for Price

    We are involved in offering a wide range of 25 K.H.Z. Transducers to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.We introduce ourselves as an eminent trader and supplier of an extensive array of  25 K.H.Z. Transducers. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame. Features: Sturdy design Highly durable Application specific design 

    ...more
    Get Best Price
  • Steam Cleaner Machines

    Steam Cleaner Machines

    Request for Price

    Steam cleaner machine offered by us is precision designed to match requirements of jewellery, Diamond & Immitation Jewellery manufacturers . Steam tank is made of S.S. to handle high pressure inside. Further it is also highly insulated to prevent Heat loss . In steam Jet arrangements for steam output is controlled through pressure Switch & safety Valve.   Features : A  Special low water cut off system that helps to protect water heater. Fitted with IBI approved safety valves ( Safety of operators is guaranteed.) Outer body made of 304 S.S. Water level indicator & water filling funneles are inbuilt features Semi automatic & Automatic M/cs are provided with foot switch for operating system. Automatic steam cleaners have facility of pumping of water into machine Automatically even when machine is under operations.

    ...more
    Get Best Price
  • rhodium plating machines

    rhodium plating machines

    Request for Price

    Get Best Price
  • Rhodium Plating Machine

    Rhodium Plating Machine

    Request for Price

    Manufacturer of S.S. & P.P. Rhodium Plating Machine 2 Ltrs. Our product range also comprises of Rhodium Machines.   Rhodium – 2 Ltr. Electroplating units are bench mounted type, compact units which takes care of all plating requirements . it is provided with three beakers, rectifiers to control output voltage and S.S. Anode. Panel of the machine is provided with digital voltmeter and ampiare  meter. Hot plate with temperature controller, and controlled the heater through front up & down Key. Electroplating units are available in standard steel & p.p. Body. Rectifier have constant voltage and constant current. Digital Timer for auto cut off voltage. Auto and manual controlled through Variac speed.   Technical Specifications: Model No. - Bath Size - Output - Max. Current - Input Supply - DimensionJCS-RHO-3B2020E   1000ml.(1Ltr.)  0-20 Volt DC   20 Amps.  230 V. AC. 26”x16”x16”JCS-RHO-3B2020E   2000ml.(2 Ltr)   0-20 Volt DC  20 Amps.  230 V.AC.  30”x16’x16’

    ...more
    Get Best Price
  • Rectifier Jewelry Machine

    Rectifier Jewelry Machine

    Request for Price

    We are one of the well-known organizations, presently engaged in manufacturing and exporting an exceptional range of 50 Amp. Rectifier for Jewelry Machine. These50 Amp. Rectifier for Jewelry Machine are highly regarded for their optimal design that lets it function in an efficient manner. 50 Amp. Rectifier for Jewelry Machineare especially designed by a team of highly talented & skilled experts, as per the industrial requirements.  

    ...more
    Get Best Price
  • Polishing Machine

    Polishing Machine

    Request for Price

    We have carved a niche in the domain as manufacturer, exporter and supplier in the domain offering varied range ofPolish Machine as per the requirement of the clients. These Polish Machine are huge demand in the market due to high quality and durability. These Polish Machine are made with extra care, so that they are always preferred to give flawless output.  

    ...more
    Get Best Price
  • Pickler Machine

    Pickler Machine

    Request for Price

    We are able to manufacture and supply Pickler, with the assistance of our a profound team of manpower, Our products are appreciated in the market. To meet the exact requirements of clients, Picklers are made available as per the specifications provided by them. These Picklers are acclaimed by large number of customer.  

    ...more
    Get Best Price
  • Mig Wire Coating Systems

    Mig Wire Coating Systems

    Request for Price

    We are involved in offering a wide range of Mig Wire Coating Systems ( Gas Type ) to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.We introduce ourselves as an eminent trader and supplier of an extensive array of  Mig Wire Coating Systems ( Gas Type ). Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame. Features: Sturdy design Highly durable Application specific design 

    ...more
    Get Best Price
  • Melter Machine

    Melter Machine

    Request for Price

    We are amongst the prominent name in the market, offering functionally advanced of gold melter. Our entire product range ensures easy installation and is delivered in well-defined Specifications : Model No.   Gold Capacity  Crucible Size   Power Consumption    Max. Temp.     input Voltage. JCS-GM 1KG.   1 KG.                       65mmx125mm.    2500 Watts (2.5K.W.)          1150C.                   230 Volt AC. JCS-GM 2KG    2 KG.                       75mmx165mm.    5000 Watts.(5 K.W.)            1150C.                   230 Volt AC. JCS-GM 5 KG.        5 KG.                       --------------------     8000 Watts.(8 K.W.)            1150C.                   230 Volt AC.

    ...more
    Get Best Price
  • magnetic polisher machine

    magnetic polisher machine

    Request for Price

    This "Magnetic Polisher' can polish the finer details & recess-er on silver, gold and platinum. Powerful magnets inside the tumbler base cause miniature steel shot rods to spin around the jewellery in forward & reverse direction.   We are looking for export inquiries from South Africa. It is available in two versions i.e. manual and microprocessor controlled:  Manual version has manual forward / reverse direction switch & timer Microprocessor version has programmable controller which takes care of forward/ reverse direction.

    ...more
    Get Best Price
  • industrial ultrasonic cleaning machine

    industrial ultrasonic cleaning machine

    Request for Price

    We are among the established names in the industry, engaged in offering Industrial Industrial Ultra Sonic Cleaning Machin for our vaulable customers. TheseIndustrial Ultra Sonic Cleaning Machine can be easily available at market attractive affordable price. Our Industrial Ultra Sonic Cleaning Machine is made using quality stainless steel procured from authentic vendors of the market.  

    ...more
    Get Best Price
  • Industrial Furnace

    Industrial Furnace

    Request for Price

    Specially designed for de-waxing and bum-out, and an optional programmer, jewellery casters can be sure that this furnace which fulfills their needs, heated stainless steel floor. Built In chimney for efficient fume extraction. Maximum space for flask. Normal operating temp. 800 0 C Rugged construction ensuring long life and maximum productivity. Extra wax tray. Safety door switch. Easily replaced elements.   Specification:  Size:4 , 6, 9, 12, 16, 24, Flask. Temperature: 1200 Degree Celsius Electrical Load: Defend on the Flasks. Supply : 230 V. AC. &  440 V. AC.  

    ...more
    Get Best Price
  • Immersible Box

    Immersible Box

    Request for Price

    Immersible Box are set of Ultrasonic transducers enclosed in SS metal box to be installed in tanks. Immersibles can be fitted at bottom from side or can be suspended at required depth and position

    ...more
    Get Best Price
  • Gold plating Equipments

    Gold plating Equipments

    Request for Price

    We are involved in offering a wide range of Pen Plating Equipments For Gold to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.We introduce ourselves as an eminent trader and supplier of an extensive array of  Pen Plating Equipments For Gold. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame. Features: Sturdy design Highly durable Application specific design 

    ...more
    Get Best Price
  • Dewaxer Machine

    Dewaxer Machine

    Request for Price

    helps remove wax from invested flasks before burnout without heating the investment. It will eliminate waxes with melting points up to 190 Degree Farenhit Stainless Steel body, powerful heaters and thermostatic control facilitates fast dewaxing process.   Specifications: SS Body, 304 mm, 18 swg 230V, 2 KW Heater Auto cut off, Thermostat Flask capacity- 6 flasks Flask size – 4*8

    ...more
    Get Best Price
  • casting machines

    casting machines

    Request for Price

    We are involved in offering a wide range of 3 In 1 Casting Machines to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.We introduce ourselves as an eminent trader and supplier of an extensive array of  3 In 1 Casting Machines. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.\ Features: Sturdy design Highly durable Application specific design   

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
M/s. Jewel Clean System, brainchild of Mr. Vincent D’souza is manufacturer of Ultrasonic Cleaning Machines ,Jewellery Machines & Material Handling Systems.
Since the year of our establishment, 2000, we have been successful in meeting every single customer's demands and continue doing the same with growing intense.
While serving customer needs, we have always concentrated on Customer Demands , Fast Service, Determination, Dedication and Development.
Deadlines are never crossed.
Determination is always there to overcome every challenge.
Dedication is the same while working small & big orders.
Development of technology is always our path to grow.
We started with Transformer Based Ultrasonic Circuits which were dominant those days. Keeping in Eventually by 2000. we were successful in commercializing Transformer. These provide more power and cleaning efficiency and are also easy to maintain & Time savings.
In 2011, the full equipped fabrication unit was started. There was no need to depend on other vendors for tanks and outer body of machines. This helped us in decreasing our delivery period.
We have the best after sales service and one year guarantee on our Ultrasonic Machines & Parts.
Your machines undergo following production stages:
Tank, tank covers, Generator Box are fabricated.
Simultaneous with fabrication, Modular tested before being wired in Generator.
Once Generator Box is ready it is under taken for wiring.
Transducers are bonded to tanks.
Once transducer bonding is done, machine is under taken for testing.
After rigorous testing of two days Ultrasonic Cleaner is ready to pack and dispatch.
Read More »

Contact Information

Jewel Clean System

  • Vincent Dsouza
  • Gala No. 2, Ekta Rahivashi Sangh, Mahakali Caves, Best Bus Depot, Jogeshwari East, Mumbai - 400093, Dist. Mumbai, Maharashtra, Andheri West
top