Keesen Crop Management Halol, Panchmahal, Gujarat

  • Ventury Assembly

    Ventury Assembly

    Request for Price

    These assemblies are primarily used for irrigation purposes as these possess a high pressure recovery. As these are less prone to erosion, the assembly offers low installation Features : Delivers plant nutrients directly into the wet zone (where root development is intensive) In-built check valve for protecting the injected liquid against back flow Can be used with a large variety of chemicals Uniform application of fertilizers Saves Energy & Manpower Optimum performance Easy to install Longer service life

    ...more
    Get Best Price
  • Union Type Assembly Screw/Plain End valve

    Union Type Assembly Screw/Plain End valve

    Request for Price

    Union assembly ball valve is manufactured from polypropylene a chemically inert thermoplastic. Union assembly ball valve is specially suited for drip irrigation system and other water flow control. Online maintenance is possible in this valve as all internals can be replaced withount removing the vale from the pipeline. Union assembly ball valve contains no metal part, failure due to corrosion eliminated widely used by chemical industries. Union assembly ball valve possess excellent ultraviolet resistivity due to presence of carbon on black Proper care taken for full strength and leakage proof manufacturing design. Hydraulically tested at 10 kg/cm2 Union assembly ball valve is approved and used by many drip irrigation manufacturers.

    ...more
    Get Best Price
  • Three Piece Screw End Valve

    Three Piece Screw End Valve

    Request for Price

    Available in Flange Type & in screw end from 15 mm to 100 mm. Manufactured from Polypropylene, a Chemically inert thermoplastic. Can be used upto 90°C Temp. Full bore design resulting lower friction loss. Hydraulically and Pneumatically tested for 15 Kg up to 4″. Protective and Resistive from most of the corrosive Chemicals. Carbon black and UV stabilizers resist ultraviolet rays and prevent degradation of PP in sun light exposure. Approved and used by many known Drip Irrigation manufacturers.

    ...more
    Get Best Price
  • Solid Seal Screw

    Solid Seal Screw

    Request for Price

    One Piece Top Entry ball valve is manufactured from polypropylene, a chemically inert thermoplastic. One piece ball valve is specially suited for Drip Irrigation System and Sugar Industries. One-piece rugged body eliminates joints / unions / Gaskets / Fasteners and consequently eliminates leakage and corrosion. Fewer Parts lower inventory of spares. On line maintenance possible as all internals can be replaced without removing the valve from the pipe-line. Since this ball valve contains no metal parts, failure due to corrosion eliminated. Widely used by chemical industries. Excellent ultraviolet resistivity due to presence of carbon black. Proper care taken for full strength and leakage proof manufacturing design. Hydraulically tested at 10kg.CM. Approved and under use by many renowed Drip Irrigation manufacturers

    ...more
    Get Best Price
  • Single Piece Screw valve, Plain End ball valve

    Single Piece Screw valve, Plain End ball valve

    Request for Price

    We make available an unsurpassed range of Control Valves, which is manufactured by making use of premium raw material such as steel, carbon steel, and brass. These valves are used to control the pressure, flow and liquid level by opening or closing. Our dimensionally accurate valves are reckoned for following features : Suitable to be used in corrosive and hazardous conditions High tensile strength Inherent toughness .

    ...more
    Get Best Price
  • Sand Filter

    Sand Filter

    Request for Price

    2. 50 m3/h/m2 (20 gpm/ft2) for dirty water. For special water conditions, e.g. iron content and recycled water, other media types are available at lower flow rates – please consult our service department or your distributor 1. Weekly Once a week perform a manual back flush, make sure that the differential pressure is below 0.25 bar (4 psi), after the back flush. 2. Monthly Close valves at the inlet and outlet of filters. Release pressure within the filter and open the top filling port. Inspect media level and its cleanliness. If media is missing add to required level. If the media is not effective anymore (long usage, or tough caking), perform chlorination treatment (see clause 3 bellow) or according to the following instructions. REPLACING THE FILTER’S MEDIA Replace the gravel when the amount of dirt (that cannot be back flushed), prevents proper functioning of the filter. Close all the valves. Open the filter drain plug, to release the pressure and to drain all the filter’s water. Open the top filling port. Open with care the side service ports. Empty the gravel from the filter, through the side service ports. Rinse the interior thoroughly with clean water. Inspect the double bottom of the filter including the partition and the “mushrooms” diffusers. Check the protective coating for damage and repair if necessary. Close the side service ports with covers and tighten properly. Fill the filter through the top filling port with the right amount of gravel – and shut the top filling port and tighten the cover properly. Check the Flow Limit Valve, or readjust the Throttle Valve (F) Back flush the filter with the new gravel to wash out dirt and dust, for at least two minutes. Open the valves for normal operation – (see installation) Maintenance Instructions General Notes : For efficient filtration the media should be crushed with sharp edges,. Flow recommendation according to dirt load (for crushed granite and crushed basalt) : 1. 75 m3/h/m2 (30 gpm/ft2) for average water condition. 2. 50 m3/h/m2 (20 gpm/ft2) for dirty water. For special water conditions, e.g. iron content and recycled water, other media types are available at lower flow rates – please consult our service department or your distributor. Minimum media grain size: 0.6 mm. 1. Weekly Once a week perform a manual back flush, make sure that the differential pressure is below 0.25 bar (4 psi), after the back flush. 2. Monthly Close valves at the inlet and outlet of filters. Release pressure within the filter and open the top filling port. Inspect media level and its cleanliness. If media is missing add to required level. If the media is not effective anymore (long usage, or tough caking), perform chlorination treatment (see clause 3 bellow) or according to the following instructions. REPLACING THE FILTER’S MEDIA Replace the gravel when the amount of dirt (that cannot be back flushed), prevents proper functioning of the filter. Close all the valves. Open the filter drain plug, to release the pressure and to drain all the filter’s water. Open the top filling port. Open with care the side service ports. Empty the gravel from the filter, through the side service ports. Rinse the interior thoroughly with clean water. Inspect the double bottom of the filter including the partition and the “mushrooms” Check the protective coating for damage and repair if necessary. Close the side service ports with covers and tighten properly. Fill the filter through the top filling port with the right amount of gravel – and shut the top filling port and tighten the cover properly. Check the Flow Limit Valve, or readjust the Throttle Valve (F) Back flush the filter with the new gravel to wash out dirt and dust, for at least two minutes. Open the valves for normal operation – (see installation)

    ...more
    Get Best Price
  • Round dripper

    Round dripper

    Request for Price

    This dripper is a low flow emitter specially developed for well water agriculture applications where there is a high degree of suspended solids. It employs an extra-large flow path cross-section, a very long Omniflow labyrinth, and an elevated filter, which combine to create an agricultural dripper with unparalleled clogging resistance. THE OMNIFLOW ADVANTAGE This dripper emitter employs the patented Omniflow labyrinth which ensures consistent turbulence throughout the entire flow path, reducing settling of suspended solids in the water. LONG LABYRINTH This dripper has a very long labyrinth with a large cross-sectional area. The long flow path ensures a gradual drop in pressure over the entire emitter. It also ensures that gradual and unavoidable sedimentation on the labyrinth surface will not clog the emitter. ELEVATED FILTER This dripper has an elevated filter which has several benefits. The elevated filter draws from water that is closer to the centre of the pipe where water is traveling at high velocity. The higher velocity helps keep the filter surface clean. Also the elevation of the filter entrance inhibits solids from settling on it between flow cycles, regardless of dripper orientation in the pipe. QUALITY The dripper is injection moulded with 100% premium virgin polyethylene and additives for resistance to UV degradation and damage caused from commonly used chemicals and fertilizers.   COMPACT ROUND DRIPPER This is compact emitter specially developed for agricultural applications. It employs a wide flow path cross-section and up to three separate filter entrances which combine to create an effective, efficient dripper with excellent clogging resistance. THE OMNIFLOW ADVANTAGE This emitter employs the patented Omniflow labyrinth which ensures consistent turbulence throughout the entire flow path, reducing settling of suspended solids in the water. EXTRA FILTRATION It has up to three separate filters, which has several benefits. Filters are on opposing sides to ensure that at least one of the filters will not be in the undesirable downward position regardless of dripper orientation in the pipe. The filters are also on opposing ends of the dripper so that at least one filter is always near the upstream end of the emitter, which has anti-clogging benefits. LARGE LABYRINTH It’s labyrinth has a large cross-sectional area which reduces the risk of clogging. QUALITY The Monsoon dripper is injection moulded with 100% premium virgin polyethylene and additives for resistance to UV degradation and damage caused from commonly used chemicals and fertilizers. Drippers Applications : On-surface multi seasonal row crops. Specifications : Pressure-compensating range: 0.4-2.5/3.0 bar (according to flow rate model & dripper lines wall-thickness) Recommended filtration: according to drippers flow rate. Labyrinth with large water passage. A wide assortment of dripper lines wall thickness (0.31, 0.34, 0.38, 0.50, and 0.63 mm). Injected dripper, very low CV. Injected silicon diaphragm UV resistant. Resistant to standard nutrients used in agricultural Features and Benefits : Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range. 100 % uniformity of water and nutrient distribution along the laterals. Continuously self-flushing: Flushes debris as it is detected, throughout operation, not just at the beginning or end of a cycle, ensuring uninterrupted dripper operation. Self-flushing system with wide filtration area improves resistance to clogging thus making pc highly resistant when using low quality water. Labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance. Widest water passages within the dripper. The water is drawn in to the dripper from the stream centre, preventing the entrance of sediments in to the drippers. Injected silicon diaphragm UV resistant. Resistant to standard nutrients used in agricultural

    ...more
    Get Best Price
  • PP ball valve flange ended

    PP ball valve flange ended

    Request for Price

    High performance is the unique feature of our wide range of PP Ball Valves Flange End offered by us are in compliance with various standards at leading price. These valves are much light weight and are considered to be a better options compared to G.I. or Size Range :½” (15 NB) to 6″ (150 NB), Working Temperature :upto 90°C Working Pressure :up to 15 Kg/cm² Special Features : Easy to Handle Long Life and Best-Quality Manufactured from Virgin Polypropylene Neoprene rubber material Low Torque, hence easy To Operate High Temperature Bearing capacity up to 90°C Easy To dismantle High Pressure Bearing capacity Up to 15 Kg/cm² Corrosive Resistance Less head loss Impact Resistant Zero Leakage Sunlight Resistant

    ...more
    Get Best Price
  • Hydrocyclone

    Hydrocyclone

    Request for Price

    A Hydro cyclone separates sand and other solid matter from water with very little head loss and 90% or better efficiency. There is no head loss build up and no clogging when the solids are separated. Hydro cyclones are easy to operate and maintain, and have no moving parts or screens. Versatility in system configurations and ease of installation are some of its great advantages. A Hydro cyclone uses a tangential injection flow process, enhancing the centrifugal forces and moving solid particles outwards. The dispersed particles move downward in a spiral path into an underflow chamber (sedimentation tank) while clean liquid moves upwards to the centre of the spiral, towards the top outlet. A specially designed rubber insert protects the neck of the Hydro cyclone from erosion and increases separation efficiency. The Sedimentation Tank can be drained automatically with an automatic flushing kit (an electric valve, controller and small command filter). Automatic flushing will not interfere with the proper functioning of the Hydro cyclone. The Hydro cyclone has a 100 micron protective coating of extra durable polyester applied electrostatically and oven cured on a zinc-phosphate layer for maximal anti-corrosion protection.

    ...more
    Get Best Price
  • Flat Dripper

    Flat Dripper

    Request for Price

    The Dura-Flat is a compact emitter specially developed for agriculture. It employs a wide flow path cross-section and an extra-large filtration area which combine to create an effective, efficient agricultural dripper with excellent clogging resistance. THE OMNIFLOW ADVANTAGE The Dura-Flat emitter employs the Omniflow labyrinth which ensures consistent turbulence throughout the entire flow path, reducing settling of suspended solids in the water. EXTRA LARGE FILTER Dura-Flat has an oversized filtration area along the entire length of the dripper. ASYMMETRY The Dura-Flat is a no symmetrical dripper which allows a narrow design suitable for pipe 12mm and 16mm. QUALITY The Dura-Flat is injection moulded with 100% premium virgin polyethylene and additives for resistance to UV degradation and damage caused from commonly used chemicals and fertilizers.

    ...more
    Get Best Price
  • Flange End Valve

    Flange End Valve

    Request for Price

    3 piece design, Single piece stem (Spindle) PTFE seated, full bore, SIZE RANGE:15mm to 100mm, Flanged as per ANSI B 16.5 (150 #) & as per BS 10 (Table DEF) & DIN STD, AVAILABLE M.O.C.: PP (POLYPROPYLENE) HDPE (HIGH DENSITY POLYETHYLENE).

    ...more
    Get Best Price
  • Drip Irrigation Pipe

    Drip Irrigation Pipe

    Request for Price

    Superior grade, economical prices and unmatched standard distinguishes our Drip Irrigation Pipe from others in the market. We are situated in Gujarat(India) and we have a well-developed network that assists us in reaching any destination.

    ...more
    Get Best Price
  • flat dripper irrigation pipe

    flat dripper irrigation pipe

    Request for Price

    Get Best Price
  • pp ball valve flange end

    pp ball valve flange end

    Request for Price

    Get Best Price
  • round dripper irrigation pipe

    round dripper irrigation pipe

    Request for Price

    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
Ravi plant biotechnologies Limited –RPBL was incorporated in 2004 and created small pesticides formulation unit near Baroda with a capacity of 2 KL per day EC formulation and packing.
Now, with 9 years of experience, in the year 2013, RPBL have Pesticides formulation and packing facilities with more than 150 KL/MT capacity per day with wide range of formulations, two units producing only Insecticides, Fungicides, Bio-fertilizers etc. and two more units of their associate Company RAVI PLANT BIOTECHNOLOGIES LTD (RPBL) producing only Herbicides.
The Company is in to Contract Manufacturing Business only exclusively with a Now as time is getting change and we have lot of satisfied customer, we have decided to increase our footprint in one more business and that is only related to crop management that can give higher and quality yield to our farmer with low water consumption and less laborious
And finally have formed a company “KEESEN CROP MANAGEMENT”
This is for exclusively Micro irrigation system manufacturer and supplier to end customer which will be farmer. It is now need of all farmers to take all technological advantage to get better yield and get wealthier with help of advanced Micro Irrigation systems. We are committed to provide world class irrigation systems, parts and services to our customer at competitive price.
We have world class machinery for manufacturing emitting pipe (dripline). We have also In-house testing facility with all modern equipmtnts which are enough capable to identify right quality is delivered to our customer.
We are also very much interested to serve industrial/corporate customers who want to take drip line from us as per their requirement. We have huge manufacturing facility, warehouses with good supply chain.
We have different drip line manufacturing machines-Round dripper line as well as flat dripper line.
The some of the advantages of drip irrigation are :
Fertilizer and nutrient loss is minimized due to localized application and reduced leaching.
Water application efficiency is high.
Field leveling is not necessary.
Fields with irregular shapes are easily accommodated.
Recycled non-potable water can be safely used.
Moisture within the root zone can be maintained at field capacity.
Soil type plays less important role in frequency of irrigation.
Soil erosion is minimized.
growth is minimized.
Water distribution is highly uniform, controlled by output of each nozzle.
Labour cost is less than other irrigation methods.
Variation in supply can be regulated by regulating the valves and drippers.
Fertigation can easily be included with minimal waste of fertilizers.
Foliage remains dry, reducing the risk of disease.
Usually operated at lower pressure than other types of pressurized irrigation, reducing energy costs.
All above will be converted in higher crop yield and lot of savings for our farmers and nation
Read More »

Contact Information

Keesen Crop Management

  • Mr. Sanjeev Kumar Choudhary
  • Survey No. 2 1 Village Vaseti Baska Tajpura Road Taluka Panchmahals - 389350 , Halol, Gujarat
top