Tumbling Machine Dealers (35 products available)

agricultural consultant, tomato soup processing machine

Agm battery separator our rich industry experience in this field enabled us to provide highly qualitative agm separator to our reputed clients. Approx price: rs 290 kilogram features: long lasting fine finish easy to use accurate in size high strength

Vibro Finishing Machine Vijimech Vibro finishing machine is a bowl type centrifugal finishing machine. The machine bowl is loaded with suitable ceramic plastic or steel media and the components be processed. The mutual rubbing action takes place inside the chamber due to the gyratory vibrations, Compared to other simpler processes this method completes the deburring process faster.

• Voltage: 220V, 380V
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year
• Application: Industrial
• Weight: 100-200kg
• Automatic Grade: Automatic

Tumbling Barrel Test Machine is used for testing mechanical strength of electrical switches of 6A/16A/32A. Control panel made up of MS powder coated finish with wooden tumbling barrel as per IS specification with sliding acrylic door. The wooden tumbling is freely rotated at a constant speed of 5rpm by the constant speed gear motor. Digital rotation counter cum indicator controls the number of rotation of the wooden tumbling barrel. The number of rotation is fully programmable and settable with the help of membrane keys of digital rotation counter.

Tumbling Machine catalogue:It is a unique simulation of hand screening by the eye. The mechanical simulation is achieved by the Tumbler screening machine which works on the principle of gyratory motion which enhances the horizontal motion of the plain sifter. The eccentricity speed can be varied to vary the residence time of the powder to be screened.The three dimensional tumbling motion distributes the screening material over the entire surface of the screen. Gentle low frequency and high amplitude movement increases the screening efficiency without screen blinding. Ordinary motors are being used with pulleys to generate tumbling motion. Accessories such as top and bottom rotating brushes are offered to prevent screen blinding to take place.Sizes offered are from 24 inch to 72 inch Diameter.From Single deck to multiple decks of 5 screens,6 separation are available.It can handle in feed of material from 100 kgs to 10,000 kgs per hour.It is used for screening and grading of powders from 10 mesh to 400 mesh.It can be fabricated in Carbon steel and Stainless Steel.

• Capacity: 100 kg.
• Application: Manufacturing Industry
• Machine Material: Mild Steel
• Automation Grade: Automatic
• Power Consumption: 0.5 HP
• Phase: Single Phase
• Voltage: 110 V
• Surface Finishing: Color Coated

This machine is used for Lubricating of Slugs with zinc sterate powder prior extrusion process. The machine is very compact in design; the drive is done through motor by a reduction gear box. The machine design in Hexagonal Drum shape.

• Capacity: 300 Liters
• Model: SIM-300

• Material: Steel
• Power (HP): 3 to 20 HP
• Automatic Grade: Manual
• Warranty: 1 year

Vibratory Finishing Machines proposed by TORR is one of the most complete and up-to-date available worldwide.The Vibro Finishing Machines with circular tank are available starting from 40 litres till a maximum of 1200 litres capacity. There are standard models as well as high frequency ones suitable for ball burnishing, with automatic separation or manual unloading, with flat bottom or with spiral ramp.All the Vibratory Dryers are automatic with raising ramp and can carry out both batch and continuous cycles.The rectangular machines (Vibro Series) for batch processes are available starting from a capacity of 12 litres till over 2000 litres, both in standard version and with high frequency for ball burnishing processes, with single or multiple motorization.Linear machines are available both for deburring, with abrasive media, and for high frequency ball burnishing processes. Vibro Finishing is a type of mass finishing manufacturing process used to deburr, radius, descale, burnish, clean, and brighten a large number of relatively small work pieces.In this batch-type operation, specially shaped pellets of media and the work pieces are placed into the tub of a vibratory tumbler. The tub of the vibratory tumbler and all of its contents are then vibrted. The vibratory action causes the media to rub against the work pieces which yield the desired result. Depending on the application this can be either a dry or wet process.Unlike tumbling this process can finish internal features, such as holes. It is also quieter. The is performed in an open tub so the operator easily observe if the reqired finish has been obtained. Vibratory or Vibro / Tumbling / Barreling finishing Machine is a type of mass finishing manufacturing process used to de-burr, radius, de-scale, burnish, clean, and brighten a large number of relatively small work pieces. In this batch-type operation, specially shaped pellets of media and the work pieces are placed into the tub of a vibratory tumbler. The tub of the vibratory tumbler and all of its contents are then vibrated. The vibratory action causes the media to rub against the work pieces which yield the desired result. An eccentric, rotating weight shakes the tub in a circular path, during which the entire load is lifted up at an angle and then dropped. As the load is falling (but not actually airborne) the tub returns to an upward position, applying an upward and angular force that causes a shearing action where the parts and media rub against each other.Silent Features: Optimum motor position and eccentric weight combination for excellent vibration Motor with energy efficient technology Stress relieved Bowl Shot blasting of Bowl Proper treatment of all welds Complete Polyurethane lining bowl Available with or without separation systems

• Capacity: 1 Ton/Hour
• Material: Mild Steel
• Country of Origin: Made in India
• Power Consumption: 7.5 Hp
• Brand Name: Sohal
• Frequency: 50 Hz
• Power Source: Electric
• Voltage: 415 V
• Drum Size: 30 X 50 Inch
• Max Stone Size: 1X1 Feet
• Shape: Round
• Phase: Three Phase

•  Motor Power:  2.2x2 kW
• Chamber Diameter: 650-1100 mm
• Features: High tensile strength , Durability , Optimum performance
• Brand: Sepro
• Cubage: 500 L
• Chamber Length: 1200-2000 mm

• Tank capacity: 3, 5

These are used mainly for comprehensive finish treatments - Roughing, Grinding and Polishing of very small objects. These machines incorporate the spin speed of a main course with four containers which rotate around their axis, but in the opposite direction of the main course. This combination of movements, combined with the particular shape of the inner containers made of polyurethane [anti-wear and anti-aging] and the new "Swing System", provides a fine finish.

• Material: Steel
• Features: Easy to use,Optimum mass finishing efficiency,Durable construction
• Design Type: Standard
• Usage: Industrial
• Voltage: 220 V

Drum Tumbling Machine  Quantity At One Time Is 50-60 Pieces Per Slot (25 To 35 Mm Thick) And More Then 300 Cobal Or  Bricks Are Also  Tumble With It At A Same Time.  Size of Stone Can Be Tumbled Are Up To (90 X 90) MM.  100% Maintenance Free.  No Consumables Are Used. (Water & 10hp Three Phase Electricity Connection)

Evaporation of moisture from all types of Linen, Garments and Textile Made up Articles after they come from Washer Extractor or Hydro Extractor,Stainless Steel Cylinder. Microprocessor Control. Reversible.15, 30, 60, 120 and 200 kg Capacity.

• Country of Origin: Made in India
• Material: MS
• Capacity: 150 Kg/Hr
• Voltage: 220 V
• Features: Easy to use , Optimum mass finishing efficiency , Durable construction
• Fuel: Electric
• Brand: Niraj Optical
• Usage/Application: Stone Polishing

• Country of Origin: Made in India
• Fuel: electric
• Design Type: Standard
• Brand Name: Kavish Enterprises

• Material: Steel
• Brand Name: Vibro sepro system
• Design Type: Standard

sawing machine, block cutter machine, calibration machine

electric switch polishing machine, electric switch grinding machine

automatic calibration machine, Block Cutter, Lime Stone, Natural Stones

centrifugal deburring machine, centrifugal polishing machine

vibro sieve, Sivtek Vibro Separator, vacuum transfer system

Drum Tumbling Machine, Cupola Furnace, Brass Aluminum Melting Furnace

Barrel Tumbling, Phosphating & Blackenning, Cylinder Liner Honing Service