Marine International Kumbharwada, Bhavnagar, Gujarat

GST Number : 24AFUPM1298M2ZN
Contact Supplier Request A Quote
  • synthetic greases

    synthetic greases

    Request for Price

    Owing to our rich expertise in supplying high quality Synthetic Greases , we have carved a niche among the top Imported Synthetic Lubricants suppliers in the domestic market. All our Synthetic Greases  are procured from top Importer from  the industry and available at inexpensive market rate.Features : Brings longer equipment life Saves energy cost High temperature capability Excellent resistance to oxidation Low temperature flow Protected against wear Range : Synthetic Engine Oils Synthetic Gear Oils Synthetic Hydraulic Oils Synthetic Refrigeration Oils Synthetic  Air Compressor Oils Synthetic  Screw Compressor Oils Synthetic Turbine Oils Synthetic Chain & Oven Oils Synthetic Barrier Seal Oils Synthetic Coolant – Metalworking Oils

    ...more
    Get Best Price
  • Stern Tube /Hydraulic System Oil

    Stern Tube /Hydraulic System Oil

    25,000 Per Barrel

    St-83a environmentally acceptable lubricant for stern tubes marine hydraulic systems biodegradable marine lubricant not oil but lubricant kemel st-83a characteristics 2013 vgp of us epa st-83a meets the eal (environmentally acceptable lubricant) specification in 2013 vgp of us epa. Base fluid polyethlene glycol, a type of polyalkylene glycol, is well known as non-toxic material. It is generally applied in cosmetics and medicines. Biodegradable oecd 301c test method found st-83a readily biodegradable. Kemel st-83a non-toxic st-83a has been classified as harmless to aquatic lives under oecd 201, 202 and 203 tests. Non-bioaccumulative st-83a is not bioaccumulative to aquatic lives because it is water soluble. No sheen no sludge st-83a is water soluble and forms no sheen or discoloration to the water. Also produces no sludge or emulsion under water surface. High seawater tolerance st-83a provides excellent lubrication and corrosion prevention even when the seawater content is 10%. Seal compatibility for stern tubes, kemel special seal of advanced fluoro-rubber should be applied. Regular viton seal is not compatible with st-83a. Comparison of base oils for eal’s    base oil polyalkylene glycol vegetable oil synthetic ester non-sheening water tolerance good good poor poor poor poor patents granted in us (#7666822). Remarks 1) st-83a absorbs water contained in air. Piping design should be consulted with kemel. 2) normal paints cannot be used with kemel st-83a. Inorganic zinc primer should be used. st-83a environmentally acceptable lubricant for stern tubes marine hydraulic systems product data formula base fluid polyethylene glycol typical properties 1) physical and chemical properties appearance pale yellow liquid viscosity at 40oc 86 mm2s viscosity at 100 oc 15 mm2s density at 15 oc 1.13 gcm3 pour point -8 oc flash point 225 oc (coc) solu.

    ...more
    Get Best Price
  • Screw Pump

    Screw Pump

    Request for Price

    Type : Screwed

    Material : Cast Iron, Stainless Steel

    Color : Blue

    Fuel : Electricity

    Pressure : 100-200kg/cm2

    Structure : Horizontal

    Pump Speed : 100-1000RPM

    ...more
    Get Best Price
  • Polyurethane Epoxy Paint

    Polyurethane Epoxy Paint

    Request for Price

    Aggressive environments demand highly durable systems. Incorporating innovative technology, the Polyurethane Epoxy paints range of atmospheric, durable finishes meets these requirements and offers exceptional cosmetics for all atmospheric vessel and Industrial areas.   Independent approval : Polyurethane Epoxy Paints has been tested to meet, and exceed, the highest international standards, such as ISO 12944, and NORSOK M501.Certified by DNV as a paint system with low-flame spread in compliance with IMO Solas and Marine Equipment Directive (MED).   Features Finish coating for decks, superstructure, and topsides Suitable for application at new-build, in dry dock and for onboard maintenance High gloss with up to 10 years’ durability Non-chalking and non-yellowing Excellent application properties with minimal overspray Resistant to splash of mineral and vegetable oils, paraffins, aliphatic petroleum products and mild chemicals   Benefits Excellent application properties by spray application, roller and brush Durable for up to 10 years – less maintenance costs Flexibility of use – simplifies stock lists Easy to apply – less time, more productivity Fast drying – reducing maintenance downtime Unlimited recoatability Outstanding gloss retention – easier cleaning Reliable and proven track record

    Type : Epoxy

    Finish : Polyurethane

    ...more
    Get Best Price
  • Mineral Water Treatment Chemical

    Mineral Water Treatment Chemical

    Request for Price

    Marine International Water Treatment offers the organic and inorganic chemicals and additives. Our more than 10 formulations help clients optimize the full water cycle, chemical consumption and operation & maintenance costs. Trade Link has a proven track record worldwide as an effective global water treatment solution that : Protects against scale deposition, corrosion and fouling Reduces unnecessary downtime Otimizes productivity Reduces environmental risks Helps save energy   Marine International extensive range of advanced technology polymers and polymeric treatment chemicals offer superior performance and have been developed for use in a wide range of demanding commercial, industrial and municipal applications involving the treatment of process waters, wastewater and effluent treatment. Marine International advanced polymer products include polymer blocks, and dry/powder and emulsion/liquid polymers. Marine International comprehensive range of polymers has been developed to suit a wide variety of wastewater treatment and effluent treatment applications and includes structured polymers, co-polymers; and low, medium, high and very high molecular weight cationic and anionic polymers in both liquid/emulsion and dry/powder forms.   We offer an array of  Water Treatment Chemicals Products as per the demand of the valued clients i.e. Ballast Tank Inhibitor, Maxi Vap Plus, Multivap, Potable Water Stabiliser, Potable Water Stabiliser Liquid, RO Alkaline Cleaner, RO Bisulphite, RO Mild Acid Cleaner, RO Surfactant Cleaner, RO Scale Control, Vaptreat. Please fill free to get the product data sheets.

    Application : Mineral Water Treatment

    ...more
    Get Best Price
  • industrial oil filter

    industrial oil filter

    Request for Price

    As the name implies - is a filter designed to remove contaminants from engine oil, transmission oil, lubricating oil, or hydraulic oil. Oil filters are used in many different types of machinery. Of our interest in particular is the use of the oil filter in internal-combustion engines in motor vehicles. Other vehicle hydraulic systems, such as those in automatic transmissions and power steering, are often equipped with an Oil Filter of some type as well. While in this article we will direct our discussion primarily to the Automotive Engine Oil Filter application, where the filtration of Motor Oil is utilized. However, the same concepts apply no matter what the end use of the Oil Filter is or which fluid is being filtered .   The filter media materials have changed over the years also. Early designs used steel wool, wire meshes, metal screens, etc. Latter bulk cotton or various woven fabrics like linen were used. When disposable filters became popular, cellulose and papers were used to minimize production costs. Finally "synthetic" media oil filters were introduced where special man made fibers are utilized. Fiberglass and metal fabrics are also sometimes used for oil filtration. Today, most low-cost disposable spin-on oil filters use cellulose filter media. Better quality oil filters use synthetic media, while top end oil filter use "MicroGlass" or extremely fine metal mesh.   Maintenance is the largest single controllable expense in a manufacturing plant. With as many as 80% of all machine failures related to contamination in the oil, pro-active methods are saving industries considerable costs every year. We offers an introduction to the problems with insufficient oil cleanliness, the causes and the remedy of the problems. All the information presented is generally known and accepted. We invite you to take advantage of the experience we have gathered over the past 50 years with oil maintenance within various types of applications. The perfect oil cleaning system will control the level of all types of contaminations. We offer wide range of Off- Line Filters, By-pass Filters, Online Filters etc.   Advantages : Large filter surfaces, long service times Precisely defined grades of filtration Systematic removal of filtered particles Precise backflushing device Low flushing quantities Backflushing without interrupting operation Long life time Compact, space-saving design   We offer an array of  Oil Filters & Machinery Products as per the demand of the valued clients i.e. CJC Filters, Boll & Kirch Filter, Finn, Fleetguard adn Parker . Please fill free to get the product data sheets.

    ...more
    Get Best Price
  • Synthetic Lubricants

    Synthetic Lubricants

    Request for Price

    Owing to our rich expertise in supplying high quality Synthetic Lubricants, we have carved a niche among the top Imported Synthetic Lubricants suppliers in the domestic market. All our Imported Synthetic Lubricants are procured from top manufacturers of the industry and available at inexpensive market rate. Features : Brings longer equipment life Saves energy cost High temperature capability Excellent resistance to oxidation Low temperature flow Protected against wear Range : Synthetic Engine Oils Synthetic Gear Oils Synthetic Hydraulic Oils Synthetic Refrigeration Oils Synthetic Air Compressor Oils Synthetic Turbine Oils Synthetic Chain & Oven Oils Synthetic Barrier Seal Oils Synthetic Coolant Metalworking Oils

    ...more
    Get Best Price
  • Lubricants

    Lubricants

    Request for Price

    Marine International is counted among the leading supplier of Lubricants in India. Procured from the top importer in the industry, our lubricants are highly demanded in various domestic markets of India for their reasonable price and efficient performance.Features : Provides long lasting life to the machines Procured from top manufacturers Help machines to run smoothly Easy and safe to use Helps to get lower operating cost   Assortments of Our Lubricants Include : Air Compressor Oil (All Grades) Circulating Oil (All Grades) Multigrade Engine Oils 20W40 (All Grades) Gear Oil (All Grades) Heat Transfer Oil (All Grades) High TBN Diesel Engine Oil (All Grades) Hydraulic Oil (All Grades) Machine Oil Or Tool Oil (All Grades)    Mould Oil (All Grades) Multigrade Engine Oil 15W40 ( All Grades ) Open Gear Oil (All Grades) Rust Preventive Oils Quenching Oil (All Grades) Refrigeration Oil ( All Grades ) Special Purpose Oil Textile Oil ( All Grades )Transformer OilTurbine Oil ( All Grades )Cutting Oil ( All Grades )

    ...more
    Get Best Price
  • Grease

    Grease

    Request for Price

    Empowered with sound infrastructural base and experienced team, we have brought inexplicable range of top quality Grease. Additionally, our Grease are highly demanded in various industrial sectors for their efficient working and smooth performance they offer to the various machines. Beside this, we are counted among the biggest domestic Stockiest of Industrial Grease in the country.Features : Superior corrosion protection High degree resistance to oxidation Higher lubrication Long lasting Life Highly efficient Available in : All Purpose AP 3 Grease Calcium Grease Chasis Grease Extreme Pressure EP -2 Grease Graphite & Molybdenum Grease Multipurpose Grease MP 3 Rust Preventive and Wire Rope Grease Water Resistance and High Temperature Grease

    ...more
    Get Best Price
  • Heat Resistant Paint

    Heat Resistant Paint

    Request for Price

    A single component, high temperature coatings, based on moisture curing silicone binder. On offshore facilities there is a continuous demand for coatings that maintain their performance despite exposure to a variety of environmental conditions and various temperature fluctuations from the substrate. The company has developed a range of heat resistant, high performance, high quality coatings meeting the latest requirements of the offshore industry. The coatings can be applied on pipes and steel surfaces as well as on process equipment. The coatings protect the steel from the influences of thermal cycling, which is one of the most extreme challenges faced by coating systems. For the protection of steels from corrosion on areas including flare stacks, chimneys, exhausts, vents, and pipework temperature upto 600©. Some of the most challenging coatings situations that exist in industry today concern heat resistance. There is a continuous demand for coatings that can maintain their function despite exposure to the extremely high operational temperatures found in the power, offshore and petrochemical processing industries. We offers a range of high quality, high performance heat resistant coatings developed specifically to meet this challenge, able to cope with extremes of temperature and deliver a dependable long-term performance for both new construction and maintenance alike.   Product Features : A heat resistant moisture curing silicone aluminium Finish meeting all maintenance requirements up wide range of temperature. One component Aluminium Pigmented Heat resistant on SA 2.5 blasted Steel Heat resistant on ST3 powertool cleaned steel No post-cure required Application direct to metal or zinc silicate primer   Applications : The products is widely used and respected in all key industry sectors, meeting the very demanding challenges required to protect major assets. Performance you can trust All our coatings are manufactured to world-leading standards. So you can rely on a consistent performance from each and every coating. Petrochemical : Piping, Heat Exchangers, Maintenance, Process equipment Power : Piping, Stacks, Process equipment Offshore : Piping, Heat Exchanger, Maintenance, Flare Stacks

    Type : Heat Resistant

    Application : Industrial

    ...more
    Get Best Price
  • Food Grade Epoxy Paint

    Food Grade Epoxy Paint

    Request for Price

    When used as part of approved scheme, this material has following certifications Food Contact - Carriage of Grains ( NOHA ) Food Contact - FDA Compliant : Dry Foodstuffs Tested for non-contaminations of grain cargo at the   Theoretical spreading rates : 3.9 m²/litre - 200 micron 3.9 m²/litre - 200 micron 154 sq.ft./US gallon - 8 mils 154 sq.ft./US gallon - 8 mils   Introduction to Food Grade Epoxy A low viscosity, 100% volume solids epoxy coating Compliant with SSPC paint 42 specification Applicable over variety of substrates including Aluminum, Concrete, Glass, FRP, GRP etc. Flexibility in application – can be applied directly over tightly adherent rust, old coating, oily, condensed & splash zone surface. Can be used underwater for wrapping of piling, jacket legs & variety of substrates   Properties of Food Grade Epoxy 100% Solid Epoxy Coating '0' Volatile Organic Compound Food-grade certified '0' Flame spread Applicable directly on difficult surfaces, viz. Stainless Steel, Aluminum, Galvanized Iron etc.   Examples of Applications As a protective coating for structures in harsh environment Condensation structure / piping Online high heat application (≤ 150°C) Underwater piling, jacket legs, risers GRE/GRP piping FRP strengthening As a Metal Filling Compound (MFC) (≤5mm) Oily bilge wells / pump rooms / engine room Concrete & concrete repairs As a floor-coating – also for "Clean Room" applications   "Happy to inform you that we stock and trade in this Food Grade Epoxy Paints, we have observed visually and found satisfactory paint which was applied on condensate surface lines at our premises”   Food Grade Epoxy Paints – an innovative 100% solid multipurpose epoxy coating Meets & exceeds the requirements enlisted in SSPC Paint 42 specification 100% solid epoxy – no solvents added – “0” VOC Specially formulated for multipurpose use in offshore environment No stringent requirements for surface preparation – can be applied on tightly adherent rust Equally good performance even when applied on oily or damp surfaces Applicable directly underwater without any modifications Can be used along with wrapping tapes underwater for extra protection to risers, piling, structure etc. Along with Zirconium (added externally), can be used as a Metal Filling Compound Food grade coating – DNV certified – applicable for internal lining of Potable water tank Class “0” rated fire retardant   APPLICATIONS Crude, product & potable water storage tank linings Ballast tank coating where surface preparation may be an issue Bilges, pump rooms etc. where there is a high possibility of oily substrate High temperature application (up to 150 deg. C) Engine shell coating Sweating lines – can be applied directly without shutdown Risers, jackets, piling – for underwater application GRE & FRP repairs & restoration Self-levelling floor coating – Sterile grade

    Type : Epoxy

    ...more
    Get Best Price
  • Drinking Water Tank Epoxy Paint

    Drinking Water Tank Epoxy Paint

    600 - 800 Per Litre

    20 Litre (MOQ)

    This epoxy paints is a 100 % solvent-free, two –component, High-Build, Polyamine adducted cured epoxy paint specially developed for long term protection on concrete and steel potable water tanks. The product is designed for use at both new building and maintenance of existing potable water tanks. The product contains no solvents, benzyl alcohol or nonyl phenol that can influence taste or smell. This means that quality water is mainntained that way. This Products is approved by the Water Research Centre (WRAS), Great Britain, according to BS 6920 for potable water up to 23°C/73°F. It is also covered by the Norwegian Health Authorities (Folkehelseinstituttet), Norway, for use in tanks for potable water offshore according to system 3A in NORSOK M-501, revision 5.    Product features and benefits Certified and approved for portable water use 100% Solvent-free and Benzyl alcohol free Application friendly Long overcoating window Light colour for easy inspection     Certificates/Approvals : This products is in accordance with ARAMCO's specification APCS 2A, 2B and 2C. Approved for aviation fuel storage tanks by Exxon Mobil Aviation International Ltd. England. Approved by Water Research Centre, Great Britain, for potable water up to 23°C/73°F. Approved by Folkehelseinstituttet, Norway, for potable water - cold water. Certified by NSF, USA for use in potable water tanks with volumes of 1000 gallon or greater, valves at 2 inches (5 cm) or greater, pipes at 16 inches (40 cm) or greater. NSF certification applies to US manufactured product only. Conforms to Norsok M-501, system no. 3.

    Type : Drinking Water, Epoxy

    Certification : FSSAI Certified

    Application : Drinking Purpose, Drinking Water Tank

    Cap Type : Flip Cap

    ...more
    Get Best Price
  • Acid Resistant Chlorinated Rubber Paint

    Acid Resistant Chlorinated Rubber Paint

    250 Per Litre

    chlorinated rubber is a premium quality, single pack, unmodified chlorinated rubber finish. it is resistant to salt spray, all types of acids, impermeable to water and exhibits excellent resistance to mould and fungus growth. chlorinated rubber can be applied over correctly prepared and primed steel and concrete surfaces.   primary uses fishing bins   preparation of substrate surfaces showing heavy scale or surface rust should be treated with protec metal conditioner and degreaser. heavily rusted surfaces should be abrasively blast cleaned.   cleaning : before and after any sanding operation, the substrate must be thoroughly degreased with & grease remover to remove all traces of dirt, oil, grease, silicone, wax etc.   drying times will vary dependent on temperature, flash off between coats, number of coats used. is suitable for brush application on small areas. 37% volume solids (depending on colour).

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers
  • Year of Establishment 1997
  • No. of Employees Below 20
  • Annual Turnover Rs. 0.5 to 2.5 Crore Approx.
  • Ownership Type Individual (Sole proprietorship)
  • GSTIN Number 24AFUPM1298M2ZN

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
Marine International is Retailer of Grease, Lubricants, Synthetic Lubricants, Screw Pump, synthetic greases, Stern Tube /Hydraulic System Oil, Acid Resistant Chlorinated Rubber Paint, Food Grade Epoxy Paint, Polyurethane Epoxy Paint, Heat Resistant Paint from Bhavnagar, Gujarat.
Read More »

Contact Information

Marine International

  • Mr. Shahnavaz Sadruddin Masani
  • Plot No. 128, Vikas Cheritable Society, Opp.I&PCL Factory, Khumbharwada Nari Road,, Kumbharwada, Bhavnagar, Gujarat
top