Mr. Bharat Thanawala Kandivali East, Mumbai, Maharashtra

  • epoxy primers

    epoxy primers

    Request for Price

    Epoxy Primers are mainly applied to provide a strong foundation to entire coating system. It is generally considered to be a coating that improves the adhesion and more importantly, the performance of the topcoat coating. List of Epoxy Primers: 1.) EPOLIQ P301/H123 Epoxy Zinc Phosphate Primer. Two-pack Polyamide Polyamine adduct cured air drying epoxy composition with anti-corrosive red oxide and zinc phosphate pigments. It is mainly used for protection of structural steel, equipments, conveyors, storage tanks etc., from chemical and saline environments. Shades available: Red oxide, light grey, WhiteMixing ratio : 3:1 by volume. 2.) EPOLIQ P93/H39 High Build Epoxy Zinc Phosphate Primer. Two component high build epoxy polyamide-polyamine adduct cured air drying with red oxide and zinc phosphate pigments. It is formulated to protect clean or pretreated metal, which is exposed to corrosive environments. Shades available: Red oxide, light grey, White Mixing ratio : 3:1 by volume. 3.) EPOLIQ P301/H123 Epoxy Zinc Rich Primer. Two component, organic zinc rich primer for structural steel and other carbon steel surfaces which is to be exposed to severe environments. Shades available:Grey. Mixing ratio : 3:1 by volume. 4.) EPOLIQ P301/H123 Epoxy Zinc Chromate Primer. Two-pack Polyamide - Polyamine adduct cured air-drying epoxy composition with anti-corrosive Zinc Chromate Pigments. The red version contains red iron oxide apart from zinc chromate. Shades available:Yellow, Red oxide Mixing ratio : 3:1 by volume.

    ...more
    Get Best Price
  • Epoxy Paint

    Epoxy Paint

    Request for Price

    Epoxy Enamel is applied over epoxy primers and provides corrosion protection along with aesthetic appearance and desired finish. Shades as per IS-5, RAL, & BS standards are available. List of Epoxy Enamel: 1.) EPOLIQ E201/H123 Epoxy Enamel. A high performance two-component Polyamide Polyamine adduct cured air drying epoxy glossy enamel. Excellent resistance to industrially polluted chemical atmosphere. Finish: Glossy. Mixing ratio: 2:1 by volume. 2.) EPOLIQ G321/H123 Epoxy Enamel in Semi glossy and Matt finishes. A high performance two-component Polyamide Polyamine adduct cured air drying epoxy Enamel. Finish: Semi Glossy, Matt. Mixing ratio: 3:1 by volume. 3.) EPOLIQ E903/H309 High Build Epoxy Enamel. A high solids, high build, fast drying polyamide-polyamine cured designed to protect steel and concrete in industrial exposures. Finish: Glossy. Mixing ratio: 3:1 by volume.

    ...more
    Get Best Price
  • Epoxy Intermediate MIO COATING

    Epoxy Intermediate MIO COATING

    Request for Price

    Epoxy Intermediate coat is applied where very superior corrosion resistance and high DFT is required. It is a sandwich coat between primer and top coat List of intermediate coat: 1.) EPOLIQ G321/H123 Epoxy Intermediate MIO A two component epoxy polyamide polyamine cured intermediate coat reinforced with lamellar micaceous iron oxide pigment for barrier protection. Shades available:Grey / Brown. Mixing ratio : 3:1 by volume

    ...more
    Get Best Price
  • coal tar epoxy coatings

    coal tar epoxy coatings

    Request for Price

    Coal tar epoxy coatings are excellently resistant towards alkaline attack and are used on structural steel and other structural materials, which is highly corrosive in nature. It has good resistance to corrosion in marine atmosphere and subsoil conditions. List of Epoxy Coaltar: 1.) FIBROSEAL TA11/AC21 Epoxy Coaltar A two component high solids coaltar coating designed to combine the toughness, adhesion and chemical resistance of epoxy resin with water resistance of coaltar.Shades available:Black                        Brown Mixing ratio :1:2 by volume                  1:1 by volume 2.) FIBROSEAL BR22/AU22 High Build Polyurethane Coaltar A two component high build epoxy polyurethane coaltar having very good toughness and water resistance used for protection of steel and concrete in a broad variety of aggressive industrial environment. Shades available:Brown Mixing ratio :1:1 by volume

    ...more
    Get Best Price
  • Polyurethane Paint

    Polyurethane Paint

    Request for Price

      These top coats are highly durable and have superior corrosion resistance, UV resistance, chemical resistance when compared to other top coats. Shades as per IS-5, RAL, & BS standards are available. Our list of Polyurethane Top Coat: 1.)KITHANE AU921/HU129: A Two Pack Aliphatic Acrylic Polyurethane enamel designed for use in protecting surface against corrosive environment and exposure to UV. It has excellent gloss and colour retention properties. Finish: Glossy.Mixing ratio: 9:1 by volume. 2.)KITHANE UE602/HU206: A two pack epoxy polyurethane finish air drying coating having excellent mechanical and chemical resistance. Finish: Glossy / semiglossyMixing ratio: 3:1 by volume. 3.)KHAMIR ACW 802: It is fast dry single pack aliphatic acrylic polyurethane coating designed for use in protecting surface against corrosive environment and exposure to UV. Finish: Glossy / semiglossy   Send Enquiry                    

    ...more
    Get Best Price
  • Texture Finish Top coat

    Texture Finish Top coat

    Request for Price

    Texturing of coatings, or spattering, is a process of achieving a special effect of raised particles of different size and dimension on the substrate. The purpose of texturing is: Decorative or aesthetic effect Breaks up the monotony of large, flat surfaces. Hides a multitude of defects. Provides abrasion resistance to the substrate. Shades as per IS-5, RAL, & BS standards are available. Our List of Texture finish top coat: 1.)KITHANE UE345/HU205: Two component polyurethane air-drying coating with texture finish, having excellent mechanical & chemical resistance. Finish: Glossy / semiglossy. Mixing ratio: 3:1 by volume 2.)KITHANE UA 104: One component polyurethane fast dry top coat with texture finish. Finish:Semiglossy

    ...more
    Get Best Price
  • alkyd coatings

    alkyd coatings

    Request for Price

    Alkyd coating systems are one pack multipurpose coatings that protects steel in moderate corrosive atmosphere. Our range includes primers (Zinc Phosphate / Zinc Chromate), Top coats in glossy and semi glossy finishes. Shades as per IS-5, RAL, & BS standards are available.

    ...more
    Get Best Price
  • surface tolerant coatings

    surface tolerant coatings

    Request for Price

    These coatings are designed to be applied over surfaces with minimal surface preparation. They are suitable when conventional surface preparation techniques are not possible, and can be used on steel and concrete surfaces for protection against corrosive environments in the industry. Our List of Surface Tolerant Coatings: 1.)KHAMIR EP 300: It is a two pack epoxy coating specially designed for marginally prepared substrates. Ideally used for maintenance purpose for painting over aged coatings, hand prepared rusty steels. It is tough and abrasion-resistant.The coatingoffers good long-term corrosion protection. Shades available: Red oxide, light grey, WhiteMixing ratio : 3:1 by volume. 2.)CORRAKSHAK MN 111: It is ready to use single component product, which can be applied after minimum surface preparation. It is used as a primer as well as top coat for protection against corrosion of metallic structures. Shades available: Aluminium.

    ...more
    Get Best Price
  • Exterior Paints

    Exterior Paints

    Request for Price

    A must for every concrete structure industrial or domestic, Old or new. We have complete range of solutions for exterior wall coatings from waterproofing compounds and exterior wall paints.  The main benefits include: The Wall Coatings provide a protective barrier that shields the underlying wall surface from the harshest weather. A bright, clean, transformed exterior always adds value to the structure Excellent colour stability ensures the structure remains attractive for a longer period. Fungicidal ingredients added to the coatings help to prevent algae and other foreign growth keeping your property looking better for longer. The coating is washable so dirt can easily be removed so as to improve aesthetic appearance of the structure.

    ...more
    Get Best Price
  • Floor Coatings

    Floor Coatings

    Request for Price

    Epoxy floor coatings are hard wearing and durable solutions for both commercial and industrial flooring. These floor coatings can be applied over floors to provide a high performance, attractive surface. At Khamir industries, our epoxy flooring experts have experience installing epoxy floor coatings for a variety of commercial and industrial buildings including in industrial manufacturing plants, commercial facilities, warehouses, clean room, pharmaceutical manufacturing buildings, food and beverage plants, laboratories, and more.

    ...more
    Get Best Price
  • Etch Primer

    Etch Primer

    Request for Price

    Etch Primer is a single component fast dry self etching primer. It is based on poly vinyl resin in combination with specific chromate inhibitive pigments. It is ideal for priming aluminum, galvanized steel, tin and mild steel and other nonferrous metals.

    ...more
    Get Best Price
  • heat resistance paint

    heat resistance paint

    Request for Price

    We offer One pack Heat resistance paint in aluminum shade. It has good anticorrosive properties along with dry heat resistance upto 200 C. This is used as a protective coating for chimneys, pipelines, etc.

    ...more
    Get Best Price
  • Chlorinated rubber coatings systems

    Chlorinated rubber coatings systems

    Request for Price

    Chlorinated rubber coatings systems are one pack coatings that protects steel in industrial corrosive atmosphere. These coatings are mainly used for maintenance purpose. Our range includes primers and compatible Top coats in glossy and semi glossy finishes. Shades as per IS-5, RAL, & BS standards are available.

    ...more
    Get Best Price
  • Lacquers

    Lacquers

    Request for Price

    Lacquers are clear coatings mainly used to enhance the aesthetic appearance of the object. It is also used as a protection layer. Lacquers can be applied on variety of substrates like steel, wood, aluminum, brass, copper, etc. They are available in epoxy and polyurethane systems. Glossy and matt finishes available: Our List of Lacquer: 1.)KHAMIR ACW 802: One pack aliphatic polyurethane lacquer glossy finish. It has excellent uv resistance. It is fast dry so object can be put to use in short time. It can be coated on brass and copper objects so they will not oxidise 2.)EPOLIQ L101/H123: Two Pack epoxy lacquer mainly used as a protection layer, the shade is pale yellow and glossy finish.

    ...more
    Get Best Price
  • Epoxy Adhesives

    Epoxy Adhesives

    Request for Price

    Epoxy adhesives are used in all the joints that require high strength or load resistance. They are also used as gap fillers. Because of their ability to adhere to wide variety of materials, their high strength, their resistance to chemicals and environments it is used in wide branch of industry sectors, from manufacturing, chemical industries, electrical and electronic industries, engineering industries, casting and forming industries, automobile industries, etc. List of Epoxy Adhesives: General purpose Epoxy Putty. General purpose Epoxy liquid adhesive. Metal Filled epoxy Compounds. Epoxy Potting compounds.

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
Established in year 1973, year of our modest beginning we commenced our operations on a very small scale in the field almost unknown to Indian industries till then – EPOXY ADHESIVES & SEALANTS. Backed by vision and commitment Khamir Industries today after completing nearly four decades is one of a leading manufacturers of Paints & Industrial coatings with a very wide and comprehensive basket of products of various chemistries viz. alkyds, epoxy, polyurethane, siloxane.
Read More »

Contact Information

Mr. Bharat Thanawala

  • Mr. Bharat Thanawala
  • Shop No.2, Tirupati Aparment, Akurli Cross Road No.1, Kandivali East, Mumbai - 400101, Maharashtra (India)

Find Popular Floor Coatings Dealers in Mumbai

top