Trace Oxygen Analyzer
Trace Oxygen Analyzer
The BI 2005 Series Bhoomi 120 Trace Oxygen Analyzer measures oxygen purity in gas stream. With built in pressure regulator and flow indicator these Trace Oxygen Analyzers can operate in high pressure streams.
Feature : Long life electrochemical sensors Low zero and span drift
...moreSyn Gas Analyzer
The Agasthya series BI 7200 Syn-Gas Analyzer System has been designed considering the flexibility required in the environments that characterize syn gas and bio-mass applications.
Features : 32-Bit Contex-M3 Arm Processor 5.7" QVGA TFT Touch Screen Display
...morePurity Oxygen Analyzers
The BI 2005 Series Bhoomi 150 Analyzer measures oxygen purity in gas stream. With built in pressure regulator and flow indicator these analyzers can operate in high pressure streams.
...moreportable flue gas analyzers
Features : Smart unit,Measures oxygen, stack temperature and ambient temperature,Derived Parameters CO2, Combustion Efficiency, Excess Air and Poison Index,20 user selectable fuels
Paramagnetic Oxygen Analyzer
Land Fill Gas Analyzer
The Agasthya series BI 7100 land fill gas analyzer has been designed for monitoring recovered and processed gases from landfill and biogas sites. This equipment continuously removes moisture from the wet sample gas and comes complete with pre-filter, sample pump, flow meter, continuous moisture removal system, long-life O2 sensor, infrared CO2 & CH4 sensor, alarm relay contacts, and 4-20mA outputs for each gas measured.
Feature : 32-Bit Contex-M3 Arm Processor 5.7" QVGA TFT Touch Screen Display
...moreHead Space Gas Analyzer
The Headspace portable gas analyzer is specifically designed to test for the presence of oxygen and carbon dioxide in food, packaged under modified and controlled atmospheres. The analyzer uses long life electrochemical fuel cell for oxygen analysis and an infra red sensor for carbon dioxide analysis. Testing is done by simply inserting the needle probe into the package for test and pressing a PUMP ONOFF key on the front panel to start the internal sample pump. The analysis of the gas is then shown on the touch screen display.
...moredust monitor
The BI-6000 is an optical instrument designed to measure the concentration of dust or particulate matter suspended in exhaust gas passing through a duct or stack of industrial process.
...moreContinuous Emission Monitoring Systems
400,000 Per Piece
1 Piece(s) (MOQ)
Bio Gas Analyzer
BI 7230 portable Syn-Gas Analyzer System
The Agasthya series BI 7230 Portable Syn-Gas Analyzer System has been designed considering the flexibility required in the environments that characterize syn gas and bio-mass applications.
Feature : RS232 interface available for data logging Industrial Enclosures Lithium ion battery for 8 hours operation
...moreBI 2013 Series Bhoomi 300 Trace Oxygen Analyzer
The BI 2013 Series Bhoomi 300 Trace Oxygen Analyzer measures traces of oxygen gas stream using fuel oxygen sensor. Ultra low drift, quick response, long sensor life and stable readings add value to this model. With built in pressure regulator and flow indicator these Trace Oxygen Analyzer can operate in high pressure streams.
Feature : Long life electrochemical sensor RS232 & MODBUS Isolated 4 -20 mA output
...moreBI-2000 Zirconia Oxygen Analyzer
BI-2000 is an in-situ Zirconia Oxygen Analyzer. - This instrument is specially designed for oxygen measurement in combustion processes, typically to improve the combustion efficiency by monitoring and controlling excess oxygen in flue gases. BI-2000 Zirconia Oxygen Analyzer is accurate, consistent and reliable even for close loop control applications. The characteristic of zirconium cell enables the oxygen analyzer to provide exceptional sensitivity at low oxygen concentration.
Feature : 32-Bit Contex-M3 Arm Processor 5.7" QVGA TFT Touch Screen Display Reliable output, adaptable to close loop control
...moreOxygen Analyzer
The BI 2013 Series Bhoomi 400 measures oxygen purity in gas stream using Electrochemical Technology. With built in pressure regulator and flow indicator these analyzers can operate in high pressure streams.
Feature : Measures O2 with range programmable up to 100% O2 32-bit Cortex-M3 ARM Processor 5.7" QVGA TFT Touch Screen Display
...moreBhoomi 210PV
The The BI 2013 Series Bhoomi 210PV Flue Gas Analyzer measures oxygen, carbon monoxide, flue gas and ambient temperature in addition to pressure and velocity. The temperature sensor is integrated into flue gas sample probe. Diaphragm pump with high suction capacity is used for extraction of flue gas. Long life electrochemical sensors with low zero and span drift are used for stable readings.
Features : 5.7" QVGA TFT Touch Screen Display Unit measurement in ppm and mg/m3 18 user selectable fuels & 2 programmable fuels Long life electrochemical sensors
...moreBhoomi 210 Flue Gas Analyzer
The BI 2013 Series Bhoomi 210 Flue Gas Analyzer measures oxygen, flue gas and ambient temperature. The temperature sensor is integrated into flue gas sample probe. Diaphragm pump with high suction capacity is used for extraction of flue gas. Long life electrochemical sensors with low zero and span drift are used for stable readings.
Feature : Measures O2, Stack Temperature and Ambient Temperature Derived Parameters CO2, Combustion Efficiency, Excess Air Unit measurement in ppm and mg/m3 32-bit Cortex-M3 ARM Processor
...moreBhoomi 200 Flue Gas Analyzer
The BI 2013 Series Bhoomi 220PV Flue Gas Analyzer measures oxygen, carbon monoxide, nitric oxide, sulphur dioxide, flue gas and ambient temperature in addition to pressure and velocity. The temperature sensor is integrated into flue gas sample probe. Diaphragm pump with high suction capacity is used for extraction of flue gas. Long life electrochemical sensors with low zero and span drift are used for stable readings.
Feature : 18 user selectable fuels & 2 programmable fuels Long life electrochemical sensors Built-in sample pump
...moreAmbient Air Quality Monitoring System
BI 9000 AQMS Air Quality Monitoring System delivers accurate measurement data in real time for a wide range of air quality criteria in a compact and modular package. Measurable parameters include Ozone (O3), Nitrogen Dioxide (NO2), Nitric Oxide (NO), Carbon Monoxide (CO), Carbon Dioxide (CO2), Sulphur Dioxide (SO2), Hydrogen Sulphide (H2S), and other toxic gases. Also the other particulate matter by parts measured are PM 2.5, PM10 and TSP.
...moreBe first to Rate
Rate This