Conical Spring Seal Dealers in Mumbai (42 products available)

Material : Metal

Shape : Round

Color : Grey

Surface Finishing : Coated

Speed : Up to 15 M/s

Shaft Diameter : Up to 12 Mm to 80 Mm

Velocity : Up to 15m/s

Conical spring mechanical seal with O-Ring in rotating and stationary parts.   Characteristics Unbalanced Mechanical Seal. Dependent on direction of rotation.   Operating Limits p: <11 Bar ; V: <15 m/s T: -40 / +180ºC Temperature is based by material selection. Operating limits are based on PV factor.

Material : Metal

Durability : Long Life

Surface Finishing : Polished

Resistivity : Rust Resistant

Application : Industrial

We are offering conical spring seal. Meeting the expectations of the clients, we offer premium conical spring seal. Our conical spring seals are used in industries for fitting in pumps of different types. These conical spring seals can withstand high temperature and pressure conditions inside the pumps and remain intact for years. We make available conical spring seal in wide range of diameters as per the pump where it is to be fitted. specifications : shaft diameter :10 to 90 mmpressure :10 bar (max)temperature : 200oc used for : water pumpcirculation pump for central heatingchemical process pumpsewage & submersible pumps raw materials used : ss 304 ss 316carbonsilicon carbidetungsten carbideceramicviton epdm ptfe

Temperature : -20C to +180C

Pressure : 10 bar g Speed : Speed

Single Seal, Unbalanced, Conical spring, Dependent on direction of rotation, It is used for process industry, Water pumps Low solids contents media, Submersible pumps etc.

Seal Face : Carbon, Ceramic, Silicon, TC

Secondary Seals : Viton/PTFE/EPDM

Conical Spring Seals is single conical spring, unbalanced seal with O-ring provided for secondary sealing. Since the Torque transmission is done by the single coil springs the seals are dependent on the directions of rotation, which is seen from the drive end of the shaft. Conical spring Unbalanced seals has taper Spring of various type and dimension to suit lot of media.Right handed spring and left handed springs are provided for clockwise and anticlockwise rotating shafts respectively.    Application Water PumpSubmersible PumpSewage PumpCentrifugal Pump  

Velocity : 10.0-15.0m/s

Model : SACS3/SACS3B

Application : Generally used for handling corrosive chemicals, hydrocarbons, general & light chemicals

Faces : Carbon / Ceramic / Sic. / Tungsten Carbide

Secondary Seals : Viton / PTFE / FEP / GFT

Hardware : SS316 / HAST-C / ALLOY-20

Shaft Dia : 12mm...80mm 0.5 Inch...3.5 Inch

Pressure : 10.0bar (max...)

Temprature : -20'C TO 180'C

We are engaged in manufacturing superior range of Conical Spring Unbalanced Seal. Used for handling corrosive hydrocarbons, chemicals, general & light chemicals, these are used in pharmaceutical, food and various other industries. Some of the specifications of these seals are as follows: Shaft Dia. : 10 to 100rnm Pressure : up to 10 Bars Temperature : -50 to 180 C Speed : up to 25 m/s.

Application : Use in corrosive chemicals, hydrocarbons, general & light Chemicals.

In order to produce quality products, we make use of superior grade raw materials. Our quality auditors strictly check the raw materials against varied quality parameters before procurement. With our strong distribution network, we efficiently distribute goods to the desired place.   Operating Limits : Pressure  -  10 bars (Max) Temperature  -  (-)20c to (+)180c Speed  -  2900 rpm (Max) Sizes  -  10 mm to 100 mm Material  -  Seal Face  -  carbon, Silicon, Cerantic, TC Secondary Seals  -  Viton/PTFE/GFT Metal Parts  -  ss 3'16, 904 L. A tov 20

Product Name : Conical Spring Mechanical Seal

These seals are used in major industries such as water & waste water industries, construction & mining industries, light chemical processes, sugar, food and beverage process industries.

Shaft Diameter : 1/2" to 5.0"

Pressure : 5 bar

Temperature : 25oC to +150oC

Conical Spring Seal (LIE/704): These seals are suitable for gear pumps, water, submersible and monoblock pumps and marine products. Single coil with a conical unidirectional springs are used which is self cleaning and highly dependable in arduous services. The flexible duck bellow is excellent for self aligned axial and radial shaft movement. Material Of Construction Sealing faces : Carbon, Silicon Carbide, Tungsten Carbide , Ceramic Metal Part : S.S 304 , SS 316 Secondary Seal : EPDM , Viton , Neoperene  

Sliding Face of the Rotating Seal Ring is designed as Right Hand Shaft Rotation which needs Right Hand Spring and Vice Versa. These Seals are Cost Effective Seals for Basic Application Equipment such as Centrifugal Pump and other Equipment with Rotating Shaft, Handling Water, Oils, Fuels, Mild Chemicals and Liquids Containing of Low Quantity of Abrasive. We are the manufacturer of Conical Coil Spring Mechanical Seal, Pusher Mechanical Seals in Mumbai INDIA.

Size : 10 mm to 100 mm

Usage/Application : Industrial

Model No. : RI-109U

Pressure : 10 Bar (Max)

Temperature : - 20 Degree To + 180 Degree C

Seal Faces : Sic/ carbon / TC VS Ceramic / Sic / TC

Type : Conical Spring

Brand Name : APCO

Country of Origin : India

Size : 18 mm to 75 mm

Application : Water and Solvents

Compact design Economical Application : Water and Solvents These are conical spring, uni-directional seal, relatively small cross section allows the seal to fit into narrow stuffing box. Simple design makes the seal maintenance friendly and economical.

Temperature : -20...1800C

Shaft Diameter : 10...100mm

Conical spring mechanical seal with O-ring provided for secondary sealing. Since the Torque transmission is done by the single coil springs the seals are dependent on the directions of rotation, which is seen from the drive end of the shaft. Right handed spring and left handed springs are provided for clockwise and anticlockwise rotating shafts respectively. These seals can carry a variety of seals faces, serving application in submersible, sewage, chemical transfer, water pumps etc.

Seal Faces : Carbon, Ceramic, SiC, Tung. Carbide

Shaft Diameter : 10...100mm

Pressure : 10 bar (max)

Temperature : -20...180OC

Velocity : 10 m/sec

Metal Parts : SS304, SS316

O-rings : Elastomers, TTV

Series AES-001 is single conical spring, unbalanced seal with O-ring provided for secondary sealing. Since the Torque transmission is done by the single coil springs the seals are dependent on the directions of rotation, which is seen from the drive end of the shaft. Right handed spring and left handed springs are provided for clockwise and anticlockwise rotating shafts respectively. These seals can carry a variety of seals faces, serving applications in submersible, sewage, chemical transfer, water pumps etc.   SEAL CHARACTERISTICS • Single Seal• Unbalanced• Conical Spring• Dependent on direction of rotation     APPLICATIONS • Water pumps• Submersible pump• Sewage pump

Low cost seal used in all types of domestic and industrial pumps, used with light oils, water, aquous solutions, antifreeze and general liquids.

Conical Spring Unbalanced Seals "Conical Spring Mechanical Seals" are extremly rugged & reliable & therefore used in wide range of sealing applications. These seals have verry few parts & hence can be easily assembled or dismantled. The seals arrangement does not warrant any modification even in case of conversion from gland packing. The compact design eliminates the requirement of extra radial & axial space for its installation. Application Use in corrosive chemicals, hydrocarbons, general & light Chemicals. Operating Limits Pressure : 10 bars (Max) Temperature : (-)20c to (+)180c Speed : 2900 rpm (Max) Sizes : 10 mm to 100 mm Material Seal Face : carbon, Silicon, Cerantic, TC Secondary Seals : Viton/PTFE/GFT Metal Parts : ss 3'16, 904 L. A tov 20

Seal Type RE-06 Conical Coil Spring Mechanical Seal Seal Type RE-06 seal  looking from Sliding Face of the Rotating Seal Ring is designed as Right Hand Shaft Rotation which needs Right Hand Spring and Vice Versa. These Seals are Cost Effective Seals for Basic Application Equipment such as Centrifugal Pump and other Equipment with Rotating Shaft, Handling Water, Oils, Fuels, Mild Chemicals and Liquids Containing of Low Quantity of Abrasive. We are the manufacturer of Conical Coil Spring Mechanical Seal, Pusher Mechanical Seals in Mumbai INDIA.   Features Conical Single Coil Spring Mechanical Seal. Inside mounted. Unbalanced Pusher Mechanical Seals. Spring design depended on Shaft Rotation with Central Tapered Spring.   Materials Seal Ring Faces : Cabon, SiC and TC Seat Faces : NiR, Ceramic, SiC and TC Elastomer : Viton, Neoprene, EPDM, NBR and Buna-N MOC : SS 316   Operating Capabilities Shaft Dia. : 10mm to 100mm Pressure : Up to 7 bar Temperature : -20oC to 140oC Speed:3000 r.p.m.  

Shaft Diameter : 10 to 100mm

Pressure : up to 10 Bars

Temperature : -50 to 180°C

Speed : up to 25 m/s

We are offering a wide range of Conical Spring Unbalanced Seal to our prestigious customers. These are incredibly rugged & reliable & therefore used in wide range of sealing applications.The LTS61U series seal are extremely rugged & reliable & therefore used in wide range of sealing applications. These Seals have very few parts & hence can be easily assembled or dismantled. CONICAL SPRING UNBALANCED SEAL TYPE LTS61U Generally used for handling corrosive chemicals, hydrocarbons, general &  light chemicals Applications : Materials : Seal Faces                : Sic/carbon/TC Vs Ceramic/Sic./TCSecondary Seals      : Viton/PTFE/GFTMetal Components : SS-316

We manufacture Conical Spring Seals which are loaded with various combination of face such as solid carbon and shrunk fitted. Our range of Conical Spring Seals are extremely sharp and reliable, therefore it is used for various sealing applications. Features Standard designUnbalanced SealInside MountedDependent of RotationEasy installation Applications Dairy IndustriesFood Processing IndustriesGeneral IndustriesPharmaceutical Industries Two versions : Balanced Seal -TSBUn-Balance Seal – TS Operating Limits : Diameter : 10â€Â¦.. 100 mmPressure : 10 barTemperature : -20oC â€Â¦ +120oCSpeed : 15 m/s

Material : Carbon, SiC, TC, Ceramic, Lecrolloy, Viton, EPDM, Nitrile, SS 316, SS 304.

Shape : Round

Country of Origin : Made in India

Usage/ Application : Industrial

Brand : SEALDYNE

Temperature : -20 Degree C to 150 Degree C

Speed : 3000 r.p.m.

Diameter : 10 to 100 mm

Pressure : Up to 5 kg/cm²

Features & Advantages : Rotating conical spring pusher seals. Unbalanced inside mounted seals. Developed for water, oil & light duties applications. Independent of direction of rotation.

Temperature : -60oC to +180oC

Diameter : 10mm to 100mm

The Clockwise rotating shaft required Right hand spring & the Anti Clockwise rotating required Left-hand spring. The rotating shaft transmits the drive to conical spring. The seal are easy to fit & pushed with shaft step or drive ring supports. This seals are comfortable to used in wide range of application bellow as.

We hold specialization in manufacturing and supplying Conical Spring Seals. These Conical Spring Seals are known for the excellent make and durable life. The Conical Spring Seals, we provide, are much demanded by several industries for excellent features. To cater to the diverse needs of the clients, we provide the Conical Spring Seals in assorted sizes and specifications.