Die Punching Machine
500,000 Per Piece
1 Piece (MOQ)
Automation Grade : Semi-Automatic
Material : Paper,Rubber
Voltage : 415 V
Machine Type : Corrugated box punching
Weight : 6 tonns
Plate Size Range : 36" x 50"
Gross Power : 5.5 kW
Dimensions(LxWxH) : 2080x1950x1900 mm
Weight : 4600 kg
ULTRASONIC PUNCH AND DIE CLEANING MACHINE
The Ultrasonic Punch & Die Cleaning Machine offers effective and consistent cleaning without manual intervention. Even the most delicate part of the punch, i.e. the tip, is cleaned of all the deposits without risk of deterioration. Difficult areas like intricate embossing and inside of die are cleaned with same efficiency. It also reduced chances of damage as manual handling is minimised. The cleaning time per set is just about 1:20 minutes. Punches and dies are accommodated on specially designed fixtures. These are then passed through 4 stages: Ultrasonic cleaning Ultrasonic rinsing Drying Rust Prevention If the punches are to be used after cleaning then the rust prevention stage can be avoided. The machine is Semi Automatic with Manual Loadingalso available in: Table Top model
Platen Punching Die Cutting Machine
Automatic Grade : Semi Automatic
Material : Stainless Steel
Voltage : 220V to 420V
Driven Type : Electric
Application : Die Cutting
Speed : 150 strokes / min Max Cutting Speed
Flat Bed Die Cut Punching Machine
420,000 Per unit
Usage/Application : Industrial
Weight : 1800 Kg
Floor Space : 195 x 80 Inch
Power Required : 3-5 HP
Machine Size : 46 x 60 Inch
Production Capacity : 900 Sheets / Hr
Power Source : Electric
Model Name/Number : SCF-13
Brand : Super Cut
:
Heavy Duty Die Punching Machine
650,000 Per Piece
Brand Name : VARDHMAN
Model : 19"X25", 22"X32", 25"X38"
Automatic Grade : Automatic
Minimum Order Quantity : 1 Piece
ULTRASONIC PUNCH AND DIE CLEANING MACHINE
Capacity : 45 Ltrs.
Material : S.S. 316
Inner Dimension : 500 X 300 X 300 mm ( LxBxH)
Outer Dimension : 650 x 400 x 600 mm ( LxBxH)
The Ultrasonic Cleaning Machine provides an effective and efficient method for cleaning tablet compression tooling and tablet press parts. Improper cleaning of Punches & Dies is a key concern for the production department. It not only leads to production department. It not only leads to product contamination but also has an adverse effect on the tablet quality and tool life. The Ultrasonic Punch & Die Cleaning Machine ensures effective and consistent cleaning of tooling without manual intervention. Even the most fragile part of a punch – the tip, is also cleaned of all the deposits without any deterioration. Difficult areas like intricate embossing, upper punch key ways, inside of die etc are also cleaned with same efficiency. Cleaning such areas is not only difficult but also time consuming if done manually. It also reduced chances of damage as manual handling is minimized. Salient Features : Common for “ D: & “B” tooling Cycle time of 5 to 15 minutes Timer Controller Tank Suitable for Tool Basket Stainless Steel Tooling Tray : The SS Tooling Tray has been designed to save time, reduce handling and prevent tool damage. The tray is suitable for use in Ultrasonic Cleaning Machines. It also provides secure handling of punches and dies from the tablet press to the cleaning system to the storage shelf. For maximum efficiency, the Tray can also be used for storage along with the plastic storage box. Technical Specifications : Power Supply : 230 V – Single Phase Tank Media : Alkaline based solution mixed in water ( 5% to 10%) Tool Basket Capacity Model D 23 ( D Tooling ) – 23 Sets Model B 23 ( B Tooling ) – 33 Sets
Die Punching Machine
850,000 Per Units
Usage : Punching Machine
Capacity : 20000 Punch Per Day
Voltage : 440 V
Power : 5 HP
Frequency : 60 Hz
Weight : 800 kg
Power Source : Electric
Machine Type : Automatic
Height : 4 ft
Length : 5 ft
Number Of Dies : 2
Power Phase : Three Phase
Finish : Powder Coated
SCF-13 Flat Bed Die Cut Punching Machine
This advanced machine is specially designed for creasing, trimming, slotting & punching of corrugated boards. This simple machine gives higher production & covers thejob of scorring, slotting machine. Additionally holes and interlocking jobs can also be done. It is equipped with control panel & runs on both auto and manual mode. It diecuts from 3 ply, 5 ply upto 13 ply corrugated boards. lt even die-cuts 'E','F' & ‘G’ flute corrugated board, sunpack sheets, gaskets, rubbersoles, etc.
Specimen Cutter
The equipment facilitates accurate and right angle cutting of specimen required for Ring Crush, Flat Crush, Substance, etc.
Die Punching Machine
650,000 Per Piece
Material : SS,MS
Driven Type : Electric
Automatic Grade : Automatic
Operating Mode : Semi Automatic
Minimum Order Quantity : 1 Piece
Die Punching machines
We manufacture Hard Plates for automatic punching machines, Bobst, Excel, Sugana, Adast, etc… And a supplier to all OEM’s.
DIE AND PUNCH
(Die & Punch for Turret punch press machines mfg. In HSS material) These are used for plastic moulds and press tools. Die is a tool , useful in all manufacturing industries to shape the material. Steel-rule die, rotary die are some of the examples.
Flat Bed Die Cut Punching Machine
325,000 Per Piece
1 Piece (MOQ)
Features : Sharp Cut, Perfect Crease, Easy to operate and accident free
Usage/Application : Sun Board Die Cutting
Brand : Super
Machine Type : Flat Bed Die Cutting
Production Capacity : 800 Boards/Hr
Power Source : 3 Phase
Die Punching Machine
Type : Die Punching Machines
Certification : CE Certified, ISO 9001:2008
Color : Black, Brown, Grey, Grey Sky Blue, Light Green, Light White
Voltage : 110V, 220V, 380V, 440V
Condition : New, Used
Power : 1-3kw, 3-5kw, 3-6kw, 5-7kw, 6-9kw, 7-9kw, 9-12kw
Driven Type : Electric, Hydraulic, Penaumatic, Pneumatic
Weight : 100-500kg, 1000-2000kg, 2000-4000kg, 500-1000kg
Automatic Grade : Automatic, Fully Automatic, Manual, Semi Automatic
Warrenty : 1year, 2years
Heavy Duty Die Punching Machine
Condition : New
Automatic Grade : Automatic
Die Punching Machine
Features : Optimum quality, Impeccable finish, Long lasting nature, Sturdy, Reliable
semiautomatic flat bed die punching machine
hardened ground die punching machine
Platen Die Punching Machine and Die Cutting Machine
Die Punching Machine