Drum Flaker Dealers in Mumbai (16 products available)

• Drum flaker: 500000
• Drum dryer: 2000000
• Double drum dryer: 3000000

We make drum flakers for all industries . Production rate 50 kgs to 5000 kgs per hr 

• Brand Name: SGPEPL

We offer the rotary drum flaker as below, rotary drum flaker salient features :- • continuous type dryers and coolers • suitable for solid separations from liquids without filtration operation • bigger solid particles flakers • suitable for sticky materials, resins, snacks, food fine chemicals • direct air heated, hot water, steam or electric heater for more details please contact us.

Drum flakerDrier are used to make flakes continuously from molten material. The molten material to be flaked is poured on the tray of Flaker which get solidified on the surface of rotating drum which is scraped to get flakes of desired thickness. Drum FlakerDrier consist of Drum fabricated from Mild Steel or Stainless steel with hollow shafts on both ends. The drum surfaced is duly ground and hardcromed with superior finish to get uniform thickness of the flakes. The drum is provided with a Hollow Shaft for entry of water for sprinkling on the inside of the drum for cooling purpose.The drum is mounted on selfaligning spherical roller bearing for smooth rotation and to take care of scraping loads. A jacketed feed tray is provided below the drum in which molten material is poured, the molten material gets coated to the drum by a sizer pipe.The Scraping arrangement is made of Copper or Fibre Blades to scrape the flakes. A discharge tray is provided to collect the Flakes.

• DIMENSIONS:(mm): 600,1000,1200
• LENGTH:(mm): 1000 ,1250 ,2000

The Pragati Enginnering Works offers flaker, industrial flaker, chemical flaker, flaker machines to convert molten chemical in to solid flakes. This is achieved by forming a thin layer of molten product on the outside surface of a rotating drum and causing this to be solidified by spraying cooling water from inside surface of the drum. An adjustable scrapper continuously removes the solidified from the drum surface in flake forms. The material of construction for the drum can be mild steel,Stainless Steel with with Hard Chrome Plating, normally Monoblock for weldable materials. This construction ensure lifelong alignment, surface will be machined and ground finished. Drum Rotating on antifriction self aligning ball roller bearing with standard Housing. Heavy duty drive arrangement for smooth, continuous and trouble free running. V-Pulley or Variable speed arrangement also provided for optimum performance. The Flaker Machine will be complete with 1440 RPM, 3 Phase, 415 volts, TEFC ISD motor, with gear box, Tray, Hopper, M.S. hood, Belt Guard. Machine mounted on heavy base-plate for trouble free service. It’s optional features is Screw Conveyor, Flaker Breaker, Film thickens controllers, Complete enclosure for Hazardous application. Company also providing pilot unit which is available for, to take running trial on receipt of sample about 15 Kgs. Company carries out the test on it, to produce reliable information’s on outputs and for the scaling of purpose. Flaker used in Acetanilide, Fatty acids, Monochloro acetic acid, Nickel catalyst, Naphthalene, Resin, Waxes and so many other products.

In this conductive dryer, wet feed film (in liquid or paste form) is poured on the rotating metal cylinder. Heating medium flows inside the cylinder. Feed dries into a film and is scraped off. This dryer is suitable for continuous drying. We are best Drum Dryer Flaker Manufacturers. Special Features of Drum Dryer Flaker : Feed can be liquid or pasty Product in powdery, flaky form Uniform drying High thermal efficiency Continuous operation Drying in single step, eliminating need for intermediateconcentration processes Application : Winnies Foods, paraffin wax, clay, fire clay, plaster slag, pasty green waste ,sewage sludge, agricultural products , grain, root vegetables, etc.

Used for converting molten slurriers into dried solid flakes. In the Drum DryerFlaker material is fed into a feed hopper which directs the materials on to the face of a rotating drum. The drum is heated or cooled depending on the application to enable the material to cling to the outside of the drum. The material is dried during the rotation of the drum and is removed by a blade or scrapper mounted along the length of the roll. Materials processed in the drum dryer are caustic soda, resins, waxes, fatty acids, guar gum, sulphur dyes etc.

• Features: easy to handle in flaked form, Low power demand, Continuous operation, Compact installation, For maintenance of low RH air blanket.
• Applications: Drug Intermediates, Stearic Acid & derivatives, Phosphorus Pentasulphide, Pthaleic Anhydride.

Drum flakers (also known as cooling drums) are used for solidifying molten material. After processing on flakers, the material forms films or easily handled flakes and is further processed or packed into containers for transport. A great advantage of flakers is that they offer a continuous process. Salient Features : Variable speed drive arrangement for adjustment of the drum speed for optimum performance, Suitable for a wide range of chemical and pharmaceutical products, Contact parts can be stainless steel, carbon steel, and hard chrome plated depending on material requirements, Accessories include hood, flake breaker, flake conveyor, applicator roller etc.

Nickel Drum Flaker, Double Tube Sheet Exchanger, super heater

Drum Flaker

Drum Flaker, Double Drum Dryer

Drum Flaker, High temperature heat exchanger

Drum Flakers, IBR Waste Heat Boiler, Oil / Gas Industrial Steam Boilers

Drum Flaker