Pipe Bending Services in Mumbai (16 service providers available)

We undertake CS, SS, ASTM pipe bending of 1/2'' N.B to 16” N.B. Various forms of bends possible are enlisted below: •  Long & Short radius bend •  U-bends - 1/2'' N.B to 16” N.B •  90 degree bends - 1/2'' N.B to 16” N.B •  Elbow bends - 1/2'' N.B to 16” N.B     Pipe from 1/2'' N.B to 4” N.B can be formed into helical coil with dimensions maintained within forbearance limit as per ASME & IS Standards. Scope of Work •  Manufacturing on Job work basis (FIM) •  Forming, Rolling •  NDT (after forming) : 100% DPT, RT & UT

Pipe bends, piggable bends, u-bends, return bends, Hot Induction Bends, miter bends manufacturers in India, Pipe bends Suppliers In India, Pipe bends Exporters In India Manufacturer, exporter & suppliers of A403 WP304L, A403 WP316L, ASME/ANSI B16.9, ANSI B16.28, MSS-SP-43,carbon steel Pipe Bends, stainless steel Pipe Bends, alloy steel Pipe Bends, Pipe bends distributors In India, Pipe bends traders In India. A403 Gr WP347 Pipe Bends, A403 Gr WP347H Pipe Bends, A403 Gr WP317 Pipe Bends, A403 Gr WP 317L Pipe Bends manufacturers, Stainless Steel Buttweld Pipe Bends, A234 WPB Pipe Bends, A234WPC Pipe Bends, A420 WPL6 Pipe Bends, A234 WP5 Pipe Bends suppliers, A234 WP11 Pipe Bends, A403 Gr WP304 Pipe Bends, A403 Gr WP 304L Pipe Bends, UNS N08904 Pipe Bends, UNS S17400 Pipe Bends, A403 Gr WP316Ti Pipe Bends, UNS S32109 Pipe Bends, A403 Gr WP321 Pipe Bends, A403 Gr WP321H Pipe Bends suppliers, Pipe bends stockholder in india, Pipe bends wholesaler in india   Pipe Bends Manufacturers In India Seamless and ERW Buttweld Carbon Steel Fittings in Size Range of 1/2″ upto 36″ SCH 10, SCH 40, SCH80, SCH 160, SCH XS, SCH XXS  Pipe Bends Manufacturers in IndiaCall: +91-022-66109829 | Send Mail: mahabhairavstainless@gmail.com An ISO 9001:2008 Certified Company, Maha Bhairav Stainless Steel is one of the leading manufacturer & exporters of Stainless Steel Pipe Bends, Pipe Elbow, Pipe Tee, Pipe Cross, Pipe Reducer, Pipe End Cap, Pipe Bends, Stubend – Lap Joint, Pipe Nipples, Pipe Outlet Fittings. We specialise in the manufacture of special size and custom shape stainless steel pipe fittings & Carbon steel pipe fittings for our customers.We can manufacture Pipe Bends upto 48″ with wall thickness ranging from 1.5 mm thickness up to 40mm for varied sizes. We are higher quality Manufacturer of Pipe Fittings, Butt welded Fittings, A403 Gr WP304, A403 Gr WP 304L, A403 Gr WP316, A403 Gr WP316L, A403 Gr WP316Ti, A403 Gr WP321, A403 Gr WP321H, A403 Gr WP347, A403 Gr WP347H, A403 Gr WP317, A403 Gr WP 317L,  A420 Fittings, Carbon Steel Buttweld Fittings, Alloy Steel Pipe Fittings, ASTM A234 Fittings, A234 Alloy Steel Pipe Fittings, Alloy Steel Buttweld Fittings with relevant test certificates of raw materials and finished products. Buttweld Pipe Bends Specifications(Piggable Bends, Hot Induction Bends)  Outside Diameter: Seamless Pipe Bends (1/2″ – 24″), ERW / Welded / Fabricated Pipe Bends (2″ – 36″)  Wall Thickness: 3mm – 40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS  Bending Radius: R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom  Product Angle: 0° – 180°  Value Added Services: Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering  Production Grades: Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low temperature Steel, Carbon Steel, Copper, Cupro Nickel, Inconel, Monel, Hastelloy  Manufacturing Standards:-> ASME:ANSI B16.9, ANSI B16.28, MSS-SP-43-> DIN:DIN2605, DIN2615, DIN2616, DIN2617, DIN28011-> EN: EN10253-1, EN10253-2  ASTM A403 – ASME SA403 – Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings  ASME B16.9 – Factory-Made Wrought Fittings Buttwelding  ASME B16.25 – Buttwelding Ends ASME B16.28 – Wrought Steel Short Radius Elbows and Buttwelding Returns  MSS SP-43 – Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications  Stainless Steel Pipe bends/ Hot Induction Bends :ASTM A403 WP316/316L, ASTM A403 WP304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404  Carbon Steel Pipe bends/ Hot Induction Bends :ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.  Alloy Steel Pipe bends/ Hot Induction Bends : ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91 Nickel Alloy Pipe bends/ Hot Induction Bends :ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )  Duplex & Super Duplex Pipe bends/ Hot Induction Bends :ASTM A 815, ASME SA 815 UNS NO S31803, S32205. UNS S32750, S32950. Werkstoff No. 1.4462 Pipe bends/ Hot Induction Bends Production Range Stainless steel pipe bends, carbon steel pipe bends and special grade pipe bends are widely supplied by us to many industries such as power generation, petrochemical, shipbuilding, paper manufacturing, chemical, pharmaceutical, and fabrication. Ppe cap also known as plugs.   Type of Pipe Bends Type A Pipe Bends, Decreased pressure factor Same wall thickness on the weld ends and on the fi tting body as for a pipe with the same specifi ed wall thickness. Their resistance to internal pressure is less than that of a pipe with the same diameter, same wall thickness and made of the same grade of steel. The required calculation methods are based on the calculation standards defined in EN 13480-3 Type B Pipe Bends, Full pressure factor Increased wall thicknesses on the fi tting body, same resistance to internal pressure as for a pipe with the same diameter, same wall thickness and made of the same grade of steel. The required calculation methods are based on the calculation standards defined in EN 13480-3 Pipe Bends Marking Each fitting must be permanently marked. Marking through hard stamping.  Manufacturer‘s mark or logo  Country of manufacture (ISO-Code)  “EN2” as reference to this standard  “B” for fittings of type B  Steel name or steel number  “W” (for welded fittings or fittings that are manufactured from welded pipes)  Cast number or code number  Mark of the inspection representative  Outside diameter D*  Wall thickness T* Pipe Bends handling and packaging EN 10253-2 Fittings & Pipe Bends are delivered with or without surface protection at the discretion of the manufacturer.   EN 10253-4 Fittings & Pipe Bends are delivered by the manufacturer in normal packaging, without surface protection, and without end protectors (caps). Special packaging, protective coverings, and end protectors (caps) can be agreed.

Bagoda Metal (India) is a leading manufacturer, exporter and supplier of stainless steel bends, carbon steel bends, and alloy steel bends in a complete range of radius and diameters. Steel pipe bends can be manufactured from a wide range of pipe materials – including low and high yield carbon steels, alloy steels, stainless steels, Cr-Ni alloys and titanium. We specialise in the manufacture of large and small size stainless steel bends and piggable bends in grades Duplex, 310S, 304L, 316L, 317L, 347, 321, 904L. Generally stainless steel bends and carbon steel bends can be manufactured from seamless or welded pipes, but the choice is made taking into consideration the technical challenges involved. Increasing number of customers in the petrochemical industry are choosing stainless steel bends, carbon steel bends and nickel alloy bends as a preferred option for modern piping and tubing systems, as good quality pipe bends significantly reduce the need for welding and use of pipe fittings. Use of stainless steel bends, carbon steel bends and alloy steel bends in piping systems also improves the flow of fluids in the piping system. Our pipe bends find applications across various industry verticals such as petroleum, power generation, natural gas, chemicals, ship building, and other industries.

Material : Stainless Steel

Nominal Size : 1/2 inch

Color : Black

Surface Finish : Anodized

Minimum Order Quantity : 1 No

Country of Origin : Made in India

Material : Stainless Steel , Carbon Steel , Nickel Alloy Steel

Elbow Type : Long Radius

Bend Radius : 1.5D

End Connection Type : Buttweld

Elbow Bend Angle : 90 degree

Material : Metal

Application : Plumbing Pipe

Country of Origin : Made in India

Size : 1/2 inch

Bend Radius : 1.5D

Bend Angle : 180 degree

End Connection Type : Buttweld

International traders - we are one of the leading manufacturing & supplying company of high quality pipe bends from india.

cnc manufacturing service, Playground Climber, Gym Multi Purpose Bench

Pipe Bends, Butt Weld Elbow, Pipe Fitting services, Square Flanges

Stainless Steel Pipe Bending Service, Clothes Display Rack

Pipe Bends, automobile engine pipe, pipe spool fabrication

Pipe Bends, Stainless Steel Plates And Coils, Steel Coupling, Steel Bushes

Pipe Bends, Dished Ends, expansion bellows dished ends, Mild Steel Plates

Pipe Bends, weld neck, Tee Pipe, Stub end, screwed pipe, Reducer

Pipe Bends, Abrasion Resistant Steel Plate, Carbon Steel Seamless Pipe