Nanostar Technologies Mathampalayam, Coimbatore, Tamil Nadu

GST Number : 33AWRPD3162D1ZU
Contact Supplier Request A Quote
  • Zero Speed Relay

    Zero Speed Relay

    Request for Price

    Since our strict packaging guidelines, we make sure that the products are suitably packed assuring zero damage during transportation. Furthermore, our packaging professionals thoroughly check the whole batch before making the final transmit. In order to meet ever-evolving requirements of the clients, we have installed a capacious storage facility. This unit helps us in keeping stock of products in different grades and specifications.Features : Monitors incoming pulses from external NPN Sensor Adjustable Time delay setting with Seconds/Minutes Range Latch facility (requires external N/C contact or switch Built-in "Reset" Button 1 x SPDT Relay Output LED indication for supply DIN Rail Housing LED indication for Relay status during Alarm Delay Time Initialization and Settings : Before Installation, Isolate the Supply. Connect the unit as shown in the diagram below. Connect the proximity switch to the 0V™, 24V™ and O/P™ terminals. . If using an external contact, connect between 0V™ and O/P™ terminals.. Set the range™ switch to seconds/minutes™. Set the delay™ adjustment to desired level. In latching mode, connect the Y and M1 terminals. Operation : Apply power between the terminals A1 and A2. The power™ green LED illuminates and the unit warms up for 800ms.The speed of the motor is received through the sensor. When the speed is above the threshold level, the relay is energized. Once the speed goes below the threshold level, the red 'relay' LED blinks till the alarm delay time is reached and then the relay will be de-energized. During the alarm monitoring delay time if the speed reaches the threshold, the LED stops blinking and the unit goes back to normal operation. Reset : In non-latching mode, the unit is reset automatically once it receives pulse from the sensor. In latching mode, the unit is reset only when the RESET key is pressed.

    ...more
    Get Best Price
  • power supply system

    power supply system

    Request for Price

    We have cemented our presence in the market by offering high quality lot that is prepared using the best grade material and modern work methodologies. Also, the material is sourced from the genuine vendors only. We own a well-maintained storage facility that helps us in meeting bulk and urgent requirements of the clients at a time. It is managed and maintained by the storekeepers.Features : Contact 2C/O Rated for 2A @250V AC/28V DC Resistive Load Elegant and compact plastic housing meeting safety standard. Din rail mountable Initialization and Settings : Before Installation, Isolate the Supply. Connect the unit as shown in the diagram belo w. Operation : The Power (green) LED glows when the unit is switched on. The unit rectifies input Voltage 230V AC to 24V DC, which can be supplied to the PNP and NPN Sensors. The operation of the sensor can be checked through the relay and its respective Relay (red) LED.

    ...more
    Get Best Price
  • PNP & NPN NS Photoelectric Sensor

    PNP & NPN NS Photoelectric Sensor

    Request for Price

    Buyers can rely on us for the best in line products as we prepare them using the finest grade raw material and modern techniques. Also, the basic material is sourced from the reliable places. We own a substantial storage space that is well-structured and maintained by the professionals. The final packaging and storing of the products is done after complete serialization to avoid last minute hassle.Features : Short Circuit & Reverse polarity protection LED function indicator

    ...more
    Get Best Price
  • PNP & NPN NO NC Photoelectric Sensor

    PNP & NPN NO NC Photoelectric Sensor

    Request for Price

    Placed in Coimbatore(India), is capable of catering to local as well as domestic markets without any hassle. Product packaging is done using industrial grade materials by us to ensure safe and undamaged delivery of consignments. Further, we provide tailored packaging solutions.Features : Short Circuit & Reverse polarity protection LED function indicator

    ...more
    Get Best Price
  • PNP NO & PNP DL Photoelectric Sensor

    PNP NO & PNP DL Photoelectric Sensor

    Request for Price

    We are a quality conscious firm, thus never compromise on the quality of the offerings. In addition, we make use of quality tested raw material and modern work methods for manufacturing the same. Owing to our immense expertise in this domain, we have carved a niche as a Supplier of PNP NO & PNP DL Photoelectric Sensor in the market.Features : Short Circuit & Reverse polarity protection LED function indicator

    ...more
    Get Best Price
  • PNP DL Photoelectric Sensor

    PNP DL Photoelectric Sensor

    Request for Price

    As we want to maintain transparency in the dealings, we offer secure payment methods to the clients which can be either online or offline. We lay special emphasis on the packaging so as to ensure damage-free deliveries. For this, we make use of high quality material for wrapping our products.Features : Short Circuit & Reverse polarity protection LED function indicator

    ...more
    Get Best Price
  • NTPU 04A & 06A Thermistor Protection Unit

    NTPU 04A & 06A Thermistor Protection Unit

    Request for Price

    We have segregated our infrastructural facility into several units including packaging unit wherein we meticulously pack our products to ensuring hassle free deliveries. For us making delivery of consignments is easy, as we have a productive logistic network that enables to reach buyers within the promised time.Features : Monitors thermal overload of motors and provides protection Microcontroller based system Built-in "reset" button 1 x SPDT relay output LED indication for supply DIN rail housing LED indication for relay status Initialization and Settings : Thermistor to be monitored are connected to T1,T2,T3,T4 and T0. Single Phasing, insufficient cooling, motor overload ,frequency and voltage abnormal . Test and Reset Function Power Supply is connected to Terminals 6 and 12. When the Motor is in range of operating condition All Red LEDs are OFF and Relay is energized Terminals 1 and 2 are Closed and 3 and 4 are Open .Red LED is On and Relay Terminals 1 and 2 is Open during temperature overload Condition and Relay Terminals 1 and 2 in Close. Accidental breaks in the Power Source to Thermistor Protection unit is also detected which ensures Final Safe. This Thermistor Protection unit activate alarm when probe resistance exceeds 3k + 5%. Operating temperature alarm get reseted in resistance lower then 1.5 k,+5% during motor cool down. Resetting function not enable until resistance reach lower then 1.5 k,+5% which ensures motor cool down to its operating temperature. Operating Conditions : Sensor Short : Thermistor short circuit is detected by device if resistance is lower than 20 and Red LED blinks and Relay gets de energized and resets Thermistor resistance is greater than 20. Thermistor open circuit detected by device if resistance is greater than 4500 and Red LED blinks and Relay gets de energized Sensor Open : When Test Key is pressed all Red LEDs are On and Relay is de-energized . When Reset Key is pressed all Red LEDs are Off and Relay is energized

    ...more
    Get Best Price
  • K4 Thermistor Protection Unit

    K4 Thermistor Protection Unit

    Request for Price

    We make sure that our inputs are in conformation with the international quality standards and free from all sorts of impurities in order to offer quality-approved products to the buyers. As we keep quality at the top of the list of our primary concerns, we maintain a stringent quality management system.Features : Micro controller based compact design Adjustable delay time within the fixed time range Din rail mountable Elegant and compact plastic housing meeting safety standard Initialization and Settings : Connect the power supply to the terminals A1' and A2'. Connect the relay terminals as shown in the diagram below. Adjust the delay time as required.

    ...more
    Get Best Price
  • Inductive Proximity Sensor

    Inductive Proximity Sensor

    Request for Price

    In order to deliver quality content, our entire production process is commenced under the strict eyes of quality examiners. We are capable of delivering the products in exceptional packaging material, this circumvents the loss during transit and thus, the product is delivered safely.Features : Protection degree IP67 - Dust tight and Protection from effects of immersion LED function indicator

    ...more
    Get Best Price
  • electrical timer

    electrical timer

    Request for Price

    With the aid of secure payment procedure and a team of adroit professionals, we have marked our prominence in the market. Our payment procedures ensure faster trade. We lay great stress on packaging and make sure the materials used for packs are industrial grade and superior. Each pack is labeled properly and it carries essential product details.Features : Adjustable time range Din rail mountable. Elegant and compact plastic housing meeting safety standard LED function indicator

    ...more
    Get Best Price
  • Electrical Initiator

    Electrical Initiator

    Request for Price

    Our online and offline modes of payment are 100% secured and facilitate payment in cash and bank transfer. Thus, we are highly preferred by the clients. A capacious warehouse and well-organized Warehouse Management System helps us in loading and unloading of all the products within short time. We keep our inventory updated by recording warehouse transactions and delivery of goods.Features : Reverse polarity protection Protection degree IP67 - Dust tight and Protection from effects of immersion LED function indicator

    ...more
    Get Best Price
  • Earth Stop Motions Unit

    Earth Stop Motions Unit

    Request for Price

    We make sure the ranges of product we offer purchasers with are as per global quality management standards. As a dependable name, we source raw materials from the well-known providers who are certified. Thus, we guarantee only quality-approved products at customer's end.Features : Operating voltage range 220V AC for ESM-01 and 24V DC for ESM- 02 Contact 2C/O Rated for 2A @250V AC/28V DC Resistive Load LED Indication for supply LED Indication for Relay status Elegant and compact plastic housing meeting safety standard. Din rail mountable Initialization and Settings : Before Installation, Isolate the Supply. Connect the unit as shown in the diagram below. Connect the External terminal points to the ˜E3™ and ˜E4™ terminals. Connect the Earth point to ˜E5™ terminal. Operation : Whenever a fault occurs, the earth point (Machine body) is connected to the sensing point causing a small current of 0.1mA to flow through the unit. This in turn triggers the circuit to operate the relay. External point 2 closes, Relay 2 changes over External point 1 closes, Relay 1 changes over Note : NO/NC function can be selected by connecting the relay in the appropriate terminals as shown in the connection diagram

    ...more
    Get Best Price
  • Earth Stop Motion Controller

    Earth Stop Motion Controller

    Request for Price

    Customers should stay rest assured with us for the payment procedures. They can pay us conveniently through wide-ranging payment mediums. In order to deliver a flawless lot of products, we keep it in safe and secure place. We have developed all the in-house storage unit wherein we keep it to prevent from damaging factors.Features : Micro Controller based Electronic Earth stop motion stop unit. Working on earth sense principle. Sliver Back creel left, right, Front creel left, Right break & Doff status Monitor . Easy Installation and reduces machine down time. Maintenance Free. LED indication for power and relay status Initialization and Settings : Before Installation, Isolate the Supply. Connect the unit as shown in the diagram below. Operation : When the sliver break or doff are in fault the machine off relay is turned on, corresponding relays are turned on. Once sliver break is rectified the the machine off relay resumes and sliver break indicating relay resets when machine is turned on.

    ...more
    Get Best Price
  • brake rectifier

    brake rectifier

    Request for Price

    Being a client-centric firm, we offer secure payment procedure in both online and offline modes. The procedure is developed by our adroit professionals and approved by the authority. We lay great stress on packaging and make sure the materials used for packs are industrial grade and superior. Each pack is labeled properly and it carries essential product details.Features : 6 terminal as standard for connection Suitable for AC Switching Compact in size Short Circuit & Reverse polarity protection LED function indicator

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

Contact Information

Nanostar Technologies

  • Mr. R. Devaraj
  • No. 16/172 B, Samychetty Palayam Road, Vannankoil, Mathampalayam, Coimbatore, Tamil Nadu
top