PTFE Lined Fittings Dealers (77 products available)

• Material: PTFE
• Color: WHITE
• Country of Origin: Made in India
• Brand Name: CK INDUSTRIES
• Size/ Diameter: 1 INCH TO 12 INCH
• Fitting Type: FLANGES
• Usage/ Application: Chemical
• Liner Thickness: 3.5mm

• Brand Name: Flowtech
• Size: Available in Different Sizes
• Application: Industrial Use
• Finishing: Polished
• Shape: Round

• Center Line to face (X) mm: 44 to 127
• Raised Face Dia (R/F) mm: 51 to 216

We are the best manufacture of plastic lined systems. our other Flange Drilling like DIN 26322633, BS 10 Table D, E or F are also available on request

Where highly corrosive materials are used in any area of Chemical process industry. Provides improved operational safety for personnel, processes and plants when handling extremely hazardous materials. Where product purity is critical viz:- Foods, Pharmaceuticals and Fine Chemicals. Where pipe replacement frequently is difficult or impossible. Where environmental pollution is to be avoided.

SIZE RANGE: 1” – 24”MATERIAL OF CONSTRUCTION: Lined tee are manufactured using Carbon Steel material as per A234 WPB schedule 40 for sizes 1” to 12” and sch 20 for 14" to 24".Material Test Certificates (MTC) can be supplied along with heat numbers on demands. Flange material is as per IS 2062 Gr. B and dimensions are as per ANSI B 16.5 ASA 150#. We manufacture standard tee which are always in stock with us and can also manufacture special tee as per customer's requirements.LINING MATERIAL: PTFE (POLY TETRAFLUORO ETHYLENE) / PP (POLY PROPELENE) / HDPE (HIGH DENSITY POLYETHYLENE) / FEP (FLUORINATED ETHYLENE PROPYLENE) / PFA (PER FLUOROALKOXY) / PVDF (POLYVINYLIDINE FLUORIDE)Short Description: CS - PP / PTFE / FEP / PFA / PVDF / HDPE LINED TEEFeatures & Specifications: PAINTING RED OXIDE PRIMER Dimensional details are as per below table

Having association with the leading names enable us to deliver high quality products to our worthy clientele. In addition to this, we procure the basic material from the trusted places only. When it comes to payment, we offer convenient and practical methods to our clients. We undertake both online and offline payment methods which are hassle free and safe for the clients.

• Operating Temperature: -29 to 260 Deg C
• Country of Origin: Made in India
• Length: 500 mm
• Usage/ Application: Chemical
• Liner Thickness: 3mm
• Spark Test: 10 kV
• Air Leak Test: 3 kg/cm Sq
• Hydrostatic Pressure Test: 10 Kg/cm Sq
• Nominal Board: 80 NB
• Nozzle Size: 25 NB
• Base Material: MS

• Size: 3/4inch, 4inch
• Material: PTFE
• Shape: Round
• Application: Industrial Use
• Finishing: Polished
• Feature: High Strength, Leak Proof
• Moq: As per Requirement

• Surface Finish: Sand Blasted
• Thickness: 3 To 6 Mm
• Diameter: Up To 20 Inch
• Weight: 2.4 To 190 Kg
• Temperature resistance: 200 To +260 Deg C
• Material: Carbon Steel

Avail high efficacy Lined Reducer from us at very affordable prices. Lined Reducer, offered by us, is manufactured using latest technology to assure its performance and quality. Use of quality raw materials in the Lined Reducer ensures high durability. Today, we are well reckoned as one of the major Manufacturers and Exporters of Lined Reducer in India. Features : High quality raw material used Durable design Resistant to high wear and tear Easy to use Non abrasive Anti corrosive No maintenance Used for : Changing diameters in a piping system Application : Chemical Pharmaceutical Water Treatments Crop Sciences Power Pesticides Dyes and Intermediates

• Country of Origin: Made in India
• Color: Blue
• Size: 5 inch
• Usage/ Application: Chemical
• Corrosion Resistance: Yes
• Make: Khushbu Industries

• Feature: Low maintenance, Efficient working, Highly demanded

Steel frame : ASTM A234 grade WPB, In compliance with ANSI B16.28 Steel Tee Pc. : According to SCH 40. Flange : ASTM A105, In compliance with ANSI B16.5/Class 150lbs; JIS 10K or DIN is also available on request. Standard : Three fixed flanges; Three loose flange or Two fixed flange and one loose flanges or two loose flanges and one fixed flange are on request. Lining : Pure PTFE in compliance with ASTM F1545-97

• Material: PTFE
• Shape: Round
• Finishing: Polished
• Thickness: 4-6mm
• Color: Blue
• Length: 4-8inch

The features of these products are as follows : Long service life Reliable functioning Best quality Easy to install

• Country of Origin: India
• Type: Ptfe Lined Elbow
• Application: Pipe Fittings
• Color: Blue
• Feature: Perfect Shape
• Condition: New
• Finishing: Non Polished

• Application: Gas Pipe, Hydraulic Pipe, Pneumatic Connections, Structure Pipe, Chemical Fertilizer Pipe
• Material: PTFE
• Size: 3/4 inch, And Also Available In 1/2 inch, 3 inch, 1 inch, 2 inch
• Pressure: 7 Kg/cm2
• Pressure Rating: 10 Barg @ 50 deg C
• Temperature: - 60 to 125 Degree C
• Pack Type: Box

• Material: ASTM A 234 Gr. WP
• Modelz: PTFE Lined 45º, 90º Elbow
• Operation Temperature: -80
• Operation Pressure: 0.6 - 6.4 MPa
• Pipe: Carbon Steel Seamless Steel
• Flange: Fixed & Loose Flange (DIN or ANSI Class)
• Diameter: DN 25 - 300 mm

• Material: Natural Rubber
• Country of Origin: Made in India
• Fitting Type: Elbow
• Usage/ Application: Industrial
• Liner Thickness: 4mm

Size (NB) øA±1 øB øC F1 F PCD øE G No. of Holes Holes Dia Pipe THK. K Liner THK. S Face THK. H 15 MM 14 21 34.9 44 89 60.3 88.9 11.1 4 15.9 2.9 4 2.4 20 MM 19.6 26.6 42.7 44 89 69.8 98.4 12.7 4 15.9 3.4 4 2.4 25 MM 19.6 26.6 50.8 44 89 79.4 108 14.2 4 15.9 3.4 4 2.4 32 MM 28.1 35.1 63.5 51 95 88.9 117.5 15.8 4 15.9 3.6 4 2.4 40 MM 33.9 40.9 73 57 102 98.4 127 17.5 4 15.9 3.7 4 2.4 50 MM 45.5 52.5 92.1 63 114 120.7 152.4

Every Year there are unfortunate chemical plant accidents caused through the ignition of flammable chemicals. One of the key reasons is the discharge of an electrical spark generated through static charging. Dip-Flon Engineering and Co. has been successfully manufacturing flow control products using fully fluorinated polymers-PTFE (Polytetrafluoroethylene) and PFA (Perfluoroalkoxy) However with a volume resistivity in excess of 1016 Ω cm, they are capable of resisting conductive discharge. Therefore if static dissipation is a requirement another piping system may be required. Any charge that builds up on the bores of the liners can reach voltages that can discharge through the process media, creating a spark. DipFlon Manufactures lined pipes and Fittings in Static Dissipating Materials. The PTFE AND PFA used both contains static dissipating agents, also known as antistatic properties. These materials are made in such a way as to allow potentially dangerous electrical charges to pass from the medium being conveyed within the piping system through to a safe earthling point via the metal pipe. Moreover the chemical resistance, temperature/vacuum rating and mechanical strength, remains unchanged by the electrical properties of the PTFE and PFA. The conducting agent in the lining material is stable, not subject to chemical attack and will not leach into the process medium.

Expansion joints are used for compensation of pipeline movements and vibrations. PTFE Expansion Joints are used in highly conentrated acidlines, as PTFE is chemically inert & flexible. They are designed to withstand 10kg/cm of pressure with moulded steel ring on the each corrugation / arch with steel flanges at both ends.

We are offering teflon lined lateral tee. Manufactured by injection molding(melt) process by using virgin pfa as per astm d 3307fep as per astm d 2116.

• Size: 20NB TO 300NB ( ¾” TO 12” )
• Length: As per Standard of B16.5 & ANSI B 16.42
• Liner: PTFE  – Poly Tetra Fluoro Ethylene, ASTM D1457, D4894 and D4895 PFA    – Per Fluoro Alkoxy, ASTM D3307 FEP    – Fluorinated Ethylene Propylene,  ASTM D2116 HDPE –  As per Standard
• Body: As per ASTM A 234 Gr. WPB / DI A395 / SS304 / SS316 ( Seamless)
• Steel Housing: Carbon steel or Stainless Steel
• Flanges: ASTM A 105 (N) / IS 2062 / ASTM A351 GR CF8 & CF8M
• Drilling / Pressure: ASA 150# / 300# / DIN / Table – F
• Dimensional STD: Elbow                  : B16.5 & ANSI B 16.42 Flanges               : ASME B 16.5 Lining Standard : ASTM F 1545
• Temperature: -29℃
• Vacuum: Full vacuum rated

AMTECH offers all types FEP/PFA lined Fittings available.Lined Elbow,Tee,Reducer & flanges in best quality.Amtech regularly exporting and supplying PTFE Line Pipings. We are offering piping mfg. of a seamless ASTM A106, SCH-40 steel pipe and is confirmed to the requirements of ASTM F1545. We supply these products with fixed or loose flange design and drilling specifications up to 8" NB sizes. Our fittings best suitable for compensating thermal expansion,very safe against vacuum,very resistance to thermal contraction,and protection against permeation. The thermal equilibrium prevents fatigue cracking failure between the tube and flared section of the liner. We also have Jacketed Lined pipes are also available as a solution to customer's typical applications and uses.   Specification

Elbows are manufactured using 90°, 60°, 45° or 30°. Other types of angles are available on request. All elbows are supplied always with a fix flanges and loose flanges are on request only.Jacked elbows with various metal options are available for special application on request.We offer a wide variety of PTFE lined elbows. All PTFE lined elbows are lined with paste extruded PTFE liners flared each end over the flange faces similar to our pipe spools.Our standard elbows are manufactured to ASME B16.5 class 150 dimensions. We can also offer elbows to DIN dimensions, all our elbows can be supplied with a stainless steel body for use on clean rooms etc.Long Radius 45 Degree and 90 Degree Elbows on special request which is ideal for use with in slurry lines to keep pressure drops to a minimum.

• Type: Equal Tee
• Material: Metal
• Use: Industrial
• Feature: Eco Friendly
• Finishing: Polished
• Quality: Best

Being an illustrious Supplier of MS Teflon Lined Equal Tee, we endeavor to achieve 100% customer satisfaction. Our company is one of the dependable providers of premium range of our product in New Panvel (W )(India). Buyers can acquire MS Lined Equal Tee in different sizes varying from 1/2''- 6''.

PTFE Lined Spherical Rubber Expansion joints offer a good life span in aggressive chemical media, where other polymers are not resistant. The PTFE liner is suitable for all commonly used liquids "PTFE Lined" Rubber Expansion Joints combine the best features of PTFE and offer superior stability to chemicals, absorbs displacement and vibration of piping equipment used in various industries (HVAC, Chemical, IC, Pulp paper and Food Production Facilities in particular) APPLICATIONS For use in Water Lines & HVAC systems in: Acid, alkali Chlorine Solvents Chemical Industry Food Processing Hot water IC Marine Services Petrochemical Systems Pharmaceutical Power Stations Pulp / Paper Mills Pure Water Steel Mills Swimming Pool water Waste / Water Treatment Plants ADVANTAGES HIGH CHEMICAL RESISTANCE HIGH ANTI-STICK PROPERTIES THERMAL STABILITY RESISTANCE TO AGE CRACKING NOISE AND VIBRATION DAMPENING TEMPERATURE RATING TO 2000C HIGH PRESSURE RATING