Ozone Overseas Ltd. Bali Nagar, Delhi

  OZOM-XRD X-ray Shielding Door     X-Ray Shielding Doors are used in diagnostic & radio therapy centres. As per international safety regulations, diagnostic and radio therapy rooms having X-ray machines should be built in such a way that hospital staff & patients present in the vicinity of harmful  rays radiation source are exposed to the minimum amount of radiation. Sliding doors are designed with lead shielding as inlay for such places.  Ozone provides X-Ray Shielding Doors which become an effective barrier to radiation in all directions. The adequacy of shielding depends on the material and thickness used for this purpose. 

OZ-ESL-WD-11-100 Sliding System Set W/O Track for Single Framed/Wooden Door of 100 Kg   System with Accessories for 100kg. Framed/Wooden Sliding Door Each set comprises of - 2 Standard Rollers - 2 Stoppers - 1 Floor Guide Suitable Track - OZ-ESL-TRACK-E2(Not included in set) For framed/wooden panel of 100kg. Material : SS Grade 304

Cable System for Connecting System Standard length 8mtr. 2mm Diameter Stainless Steel Grade 304 Finish SSS

Track to Wall Fixing Clamp Suitable for mounting on to masonry Proper curvature ensures firm grip of the track Clamp in two parts ensures proper tightness for the clamp Stainless Steel Grade 304 Finish: SSS

OZ-SL-44-A5-SSS Wall to Track Fixer Track Mounting Bracket Elongated hole to compensate drilling inaccuracies Flat face for firm mounting Mounted on to the top of the track OZ-SL-44-B1 Track Stainless Steel Grade 304

  OSSKH-1-ED-PSS Wall to Track Connector Reinforcing Track Connector with Wall For mounting with wall Rectangular design With two grub screws to prevent relative movement Stainless Steel Grade 304 Finish: PSS

Telescopic Reinforcing Bar with Left Right Adjustment Gaskets to prevent glass damage Telescopic construction Length adjustable from 780mm to 1340mm Left Right adjustment at wall end Firm positioning of the glass panels Stainless Steel Grade 304 Finish: PSS

  ORB-1A Standard PSS   Wall to Glass Stabilizing Bars   Telescopic Reinforcing Bar with Left Right Adjustment Gaskets to prevent glass damage Telescopic construction Length adjustable from 780mm to 1340mm Left Right adjustment at wall end Firm positioning of the glass panels Stainless Steel Grade 304 Finish: PSS

  OSH-1M Wall to Glass Offset Hinge   • Suitable for 8mm and 10mm glass • Invisible screws with help of magnetic covers • Secure holding of glass • Small size – 55mm height • Off set plate for better installation • Material SS 304 grade • Finish: PSS/SSS   KEY FEATURES       • Hides screws with Magnetic Cap after installation • Small Compact Size • Smooth movement without friction    

Premium Shower Enclosure Fittings Comes with Snap-on Cover Hidden Screws for uniform design appeal Water Tight Fitting Ensures NO Water Leakage Minimum Gap Offset positioned pivot line Secure holding with glass With gaskets to prevent glass damage Door width: Max 800 mm Door weight: Max 40 Kg Suitable Glass thickness: 8mm / 10mm Fittings are to be tightened to the specified torque in all occasions (4 Nm) Material: Brass Finish: CP   features   • Hidden screws for uniform design appeal • Can be used for double action doors also • Allow a minimum of 3mm wall to glass or glass to glass gap due to new design backplate

OSH-LO-11 L/R-CP Wall to Glass “Lift Off” Hinge   Wall To Glass Hinge for Left & Right  (LIFT OFF HINGE) Ensures minimum gap between floor and door when closed Separate product for Left & Right Opening Door Stainless Steel Grade 304 Material: Brass Finish: CP

OGC-DH-SC-1-SSS Wall To Glass Hinge 90°   Wall to glass hinge 90° Self Centering spring action from 35° to 90° Openable in both direction Hold open point at 90° Stainless Steel Grade 304 Suitable for Glass Thickness 10mm / 12mm Finish: SSS

Premium Shower Enclosure Fittings Comes with Snap-on Cover Hidden Screws for uniform design appeal Water Tight Fitting Ensures NO Water Leakage Minimum Gap Offset positioned pivot line Secure holding with glass With gaskets to prevent glass damage Door width: Max 800 mm Door weight: Max 40 Kg Suitable Glass thickness: 8mm / 10mm Fittings are to be tightened to the specified torque in all occasions (4 Nm) Material: Brass Finish: CP

Wall to Glass Connector No Projection for Glass Counter Sunk Hole Stainless Steel Grade 304

Wall to Glass Connector for Canopy Threaded portion to adjust the height Teflon washers to prevent damage to the glass Firm base to have a secure seating Flat head bolt Stainless Steel Grade 316

OCF-01-S-SSS Wall to Glass Connector   Wall to Glass Connector for Canopies Adjustable in angle and distance Firm base to have a secure seating Allows gradient for canopies Teflon washers to prevent damage to the glass Flat head bolt Stainless Steel Grade 316 Suitable for small canopies in interior/exterior application

Wall to Glass Connector for Canopy Threaded portion to adjust the height Teflon washers to prevent damage to the glass Firm base to have a secure seating Flat head bolt Stainless Steel Grade 316

OPFGC-1-52.5mm Wall to Glass Connector     Wall to Glass Connector 90°(Movable) Firm grip Adjustable within +2.5mm No projection from glass Stainless Steel Grade 304 Also available without CSK Head

  OSH-555-ED-BN Wall to Glass Bracket (for Fixed Glass)   Wall to Glass Bracket  Secure holding with glass Material: Brass Finish: BN/CP

Wall to Glass Bracket Secure holding with glass to wall With gaskets to prevent glass damage High rigidity Finish: CP/SN

OSH-1A-CP Wall to Glass Adjustable Hinge Wall to Glass Hinge Allow to set zero point of the hinge after installation and adjust for any irregular wall condition Simply loosen one side of the grub screws to adjust the door to the desired angle and closed position Door width should not exceed 800 mm. Door weight should not exceed 40 Kg. Suitable Glass thickness 8mm / 10mm. Fittings are to be tightened to the specified torque in all occasions (4 Nm) Spindle can be adjusted to 85° inward closure Self-closing from 20° Material:-Brass Finish: CP/SN

Over Panel Patch For Wall Mounting With pivot pin 10mm diameter Interchangeable patch faces to keep bolt head on same side Adjustable pivot point 55/6mm Secure without cover Material:-Stainless Steel Grade 304 Finish:- SSS

Material : Stainless Steel Grade 304

OGC-11-PSS Wall / Floor to Glass Connector   Glass Connector Strengthening glass structure Firm holding with floor With gaskets to prevent glass damage Finish: PSS / SSS    

Glass Connector for Canopy To be used with OCF-02 with a Cable or Rod More gripping surface Firm base to have a secure seating Suitable for a canopy of 2mx2m with two pairs Stainless Steel Grade 316