Pantech Instruments Akota, Vadodara, Gujarat

  • Universal Two Wire Transmitters

    Universal Two Wire Transmitters

    Request for Price

    Pantech's two wire transmitters, model 872 is designed over low drift, low power components. The transmitter is deisgned to accept universal type rtd thermocouple like temp. Inputs or other linear inputs, and provide 4-20ma dc signal on the same two wires, which carry the 24 v dc. Note that the user can select any one of the available rtdthermocouplelinear inputs by configuring through front fascia keys. The transmitter is also optionally equipped with a local 4 digit lcdled display to exhibit the input signal value as configured for. All the configurations like : input signal type selection, zero and span adjustments for display range and outputs can be done through front keys only. The output signal of 4 – 20ma dc capable of driving a load of upto 800°. This eliminates needs to run compensating cable or three core cable between the field and control room. For thermocouple inputs, cjc compensation is inbuilit. The output is linear w.r.t. The input temperature signal. The transmitter is available in field mounted panel mounted housings as required.

    ...more
    Get Best Price
  • Universal Input Signal Isolators

    Universal Input Signal Isolators

    Request for Price

    Pantech's Universal Input Signal Isolator, model 821U is an ideal instrument for providing isolation between input, multiple outputs and power supply. The module is an ideal choice when fanning out of process signal is required. It provides up to max. 4 output signals, each capable of driving of 800 ohms. All these outputs are isolated from each other, input and power supply. This ensures isolation between various subsystems and protects the system from all grounding problems. The isolators are designed such as to accept UNIVERSAL type of inputs. The high end programmed microcontroller allows the user to configure all the parameters of the instrument. All the calibrations, fine tuning of the output can be done without opening the instrument. All the types of inputs, acceptable by the instrument are mentioned further. The unique design of the module requires only one single positive barrier at the input from a two-wire transmitter for intrinsic safety and isolates the control room. The cold junction compensation is built in and up scale burn out is provided as standard features for thermocouple input ranges.

    Dimension : Standard and Specials

    ...more
    Get Best Price
  • Configurable Indicators

    Configurable Indicators

    Request for Price

    Pantech's Programmable Microprocessor based Indicator cum Controller, model 802 is an ideal instrument for providing indication as well as controlling set points to various processes. It is designed to accept various process inputs ( Current, Voltage, RTD, Thermocouples, Resistances ) simultaneously i.e in UNIVERSAL manner or any one of these in PREDEFINED manner. When UNIVERSAL manner, The user can configure from the front keys to select any one of the input automatically. The user can also configure to set the range of linear inputs or calibrate the instrument without openint it. The model 802 can give maximum 4 relay outputs. All the contact output related specs like – SETPOINT, ALARM TYPE, HYSTERISIS – can be configured easily by the front panel keys itself. Retransmission facility is of course provided with all possible configurations allowed by front keys as usual. The instrument can be optionally equipped with serial communication facility to operate on MODBUS RTU protocols. Signle level password is there to keep the settings and configurations intact for the right user only. Low drift precession components are used for long term accuracy of the instruments. All instruments undergo a burn-in for better reliability.The instrument is available in different formats and sizes. Information regarding specification and size is given below.

    ...more
    Get Best Price
  • Configurable Indicators

    Configurable Indicators

    Request for Price

    Rugged and Time proven designs. Universal Predefined type inputs. µp based & Fully configurable. Supports wide input types & ranges 34 digit displays available. Display size upto 16” with Optional Bargraph. Gives max. 4 onoff outputs. Retransmission output on PV. Transmitter P.S. @ 24V DC. Various sizes Mountings Enclosures supported. RS-485 Comm. OP provided

    ...more
    Get Best Price
  • two wire transmitter

    two wire transmitter

    Request for Price

    Pantech's Two Wire Transmitters, model 874 is designed over low drift low power components.It pumps in a constant current into the liquid through the conductivity cell to measure the electrical conductivity of any liquid. The square wave signal is selected as an excitation voltage for the conductivity cell for the ease for processing. It provide 4-20mA dc signal on the same two wire which carry the 24 V DC for conductivity measurement. The transmitter is an ideal choice for Linearized measurement with standard conductivity cell. Temperature of the liquid is monitered by a RTD element and compensation is provided over the complete operating range. It provides a current output signal of 4 – 20 mA DC capable of driving a load of upto 650Ω.

    ...more
    Get Best Price
  • Timers-862

    Timers-862

    Request for Price

    PROGRAMMABLE DIGITAL TIMERS MODEL 862 Introduction Pantech's Digital Timers, model 862, are designed to set time delays in the process. Microprocessor electronic circuit designs this particular unit. The instrument displays time parameter as a virtue of 45678 digit display as required by the user. One can set time through front keys. It can be field programmed in three modes: Sequential Timer: Single cycle & Multicycle (Programmable) ON – OFF Timer: Single cycle & Multicycle (Programmable) ON Delay Timer The instrument available in 48*48*100 mm, panel mounted (H*W*D) is equipped with max. 2 nos. of independent channels, and gives a potential free contact output for both channels. Another version is 96*96*150mm which is equipped with max. 8 nos. of independent channels and gives open collector output. The Digital Timers are available in panel mounting and DIN rail mounting versions. The instrument incorporates low drift integrated circuits and industrial grade components for long trouble free operation. Burn in of each module ensures long trouble free operation.

    ...more
    Get Best Price
  • Thermal Dispersion type Flow Metering system-845T

    Thermal Dispersion type Flow Metering system-845T

    Request for Price

    Pantech Instruments, an eminent manufacturer of process control instruments since last 15 years, has developed this type of meter by their indigenous R&D efforts. The flow meter is definitely a state of technology product, totally in line with all the industrial and gas standards. Principle of Operation The thermal sensor uses the principle of heat dissipation. A heated sensor is inserted into the stream of gas flow. The cooling effect of the gas is measured, transduced and interpreted as flow. The cooling effect is a direct function of the heat transfer that takes place due to the flow of gas. The heat transfer in turn is a direct function of the velocity as well as density of the process gas. Hence variations in temperature and pressure in the process gas are automatically compensated. For all practical purposes the output signal obtained is pressure and temperature compensated “massflow” signal. Thus the compensated flow independent of pressure and temperature variation is indicated without need for any separate transducers for the same. The user friendly features and main advantages of this flow meter are : In areas of flow metering, where the process gas pressures are very low, conventional flow metering techniques present a no. of limitations. In case of Thermal Mass Flow meter, upstream pressure required is very low because pressure drop across the sensor is negligible. Hence it works in place where OrificeRotameter type flow meters have failed. For this reason it is ideally suitable for very low height gravity feeds, reflux lines, condensersaccumulator systems etc. There are no moving parts in the system. So choking, jamming effect are not observed even after very long run of the meter. There is no need to carry out periodic cleaning unless the fluid is very viscous or dirty.

    ...more
    Get Best Price
  • Thermal Dispersion Flow Switch

    Thermal Dispersion Flow Switch

    Request for Price

    Pantech Instruments, an eminent manufacturer of process control instruments since last 15 years, has developed this type of meter by their indigenous R&D efforts. The flow meter is definitely a state of technology product, totally in line with all the industrial and gas standards. The thermal sensor uses the principle of heat dissipation. A heated sensor is inserted into the stream of gas flow. The cooling effect of the gas is measured, transduced and interpreted as flow. The cooling effect is a direct function of the heat transfer that takes place due to the flow of gas. The heat transfer in turn is a direct function of the velocity as well as density of the process gas. Hence variations in temperature and pressure in the process gas are automatically compensated. For all practical purposes the output signal obtained is pressure and temperature compensated “massflow” signal. Thus the compensated flow independent of pressure and temperature variation is indicated without need for any separate transducers for the same.

    ...more
    Get Best Price
  • Thermal Dispersion Flow Meter

    Thermal Dispersion Flow Meter

    Request for Price

    The thermal sensor uses the principle of heat dissipation. A heated sensor is inserted into the stream of gas flow. The cooling effect of the gas is measured, transduced and interpreted as flow. The cooling effect is a direct function of the heat transfer that takes place due to the flow of gas. The heat transfer in turn is a direct function of the velocity as well as density of the process gas. Hence variations in temperature and pressure in the process gas are automatically compensated. For all practical purposes the output signal obtained is pressure and temperature compensated “massflow” signal. Thus the compensated flow independent of pressure and temperature variation is indicated without need for any separate transducers for the same.

    ...more
    Get Best Price
  • Steam Flow Meters-845S

    Steam Flow Meters-845S

    Request for Price

    MASS FLOW INDICATORS CONTROLLERS – STEAM FLOW METERING SYSTEMS MODEL 845S ( Microprocessor based electronics ) Introduction Pantech Instrument’s Model 845S represents FLOW INDICATORS TOTALIZERS CONTROLLERS for mass flow applications related to STEAMS flow. The instrument is so designed to accept 3 inputs of FLOW, PRESSURE and TEMPERATURE at a time. Based on these inputs, and high end algorithms of STEAM TABLES fed in the chip, the instrument calculates MASS INSTANTANEOUS FLOW RATE to a resolution of 44.5 digits. TOTALIZED value is displayed through 8 digits red LED and this totalizer value is always protected against power failures through internal memory structures of microprocessor. Optionally the instrument is designed to give two contact relay outputs and a RETRANSMISSION ISOLATED signal on INSTANTANEOUS FLOW RATE. Serial communication outputs for computer system interfaces are also given optionally. All configurations, calibrations and output fine tunings etc. can be performed by front four keys only without opening the instrument. In the core of all the functions lies the latest and highly proven microprocessor based chipsets. The high end softwares ensure the most user friendly interactions by the user. The instrument incorporates low drift operational amplifiers and industrial grade components for long trouble free operation. Burn in of each module ensures long trouble free operations.

    ...more
    Get Best Price
  • steam flow meters

    steam flow meters

    Request for Price

    Pantech Instrument’s Model 845S represents FLOW INDICATORS TOTALIZERS CONTROLLERS for mass flow applications related to STEAMS flow. The instrument is so designed to accept 3 inputs of FLOW, PRESSURE and TEMPERATURE at a time. Based on these inputs, and high end algorithms of STEAM TABLES fed in the chip, the instrument calculates MASS INSTANTANEOUS FLOW RATE to a resolution of 44.5 digits.

    ...more
    Get Best Price
  • Signal Isolators

    Signal Isolators

    Request for Price

    Pantech's Signal Isolator, model 821 is an ideal instrument for providing isolation between input, multiple outputs and power supply. The module is an ideal choice when fanning out of process signal is required. It provides up to four output signals, each capable of driving of 800 ohms. All these outputs are isolated from each other, input and power supply. This ensures isolation between various subsystems and protects the system from all grounding problems. The module accepts any one out of variety of inputs. It accepts a currentvoltagetemperature input or 4 – 20mA DC from two wire transmitters “or” sensor. The unique design of the module requires only one single positive barrier at the input from a two-wire transmitter for intrinsic safety and isolates the control room. The module also accepts TC and RTD signals. The cold junction compensation is built in and up scale burn out is provided as standard features for thermocouple input ranges. As well as it can be equipped with an intrinsically safe current output.

    ...more
    Get Best Price
  • Signal Isolators

    Signal Isolators

    Request for Price

    Pantech's Signal Isolator, model 821 is an ideal instrument for providing isolation between input, multiple outputs and power supply. The module is an ideal choice when fanning out of process signal is required. It provides up to four output signals, each capable of driving of 800 ohms. All these outputs are isolated from each other, input and power supply. This ensures isolation between various subsystems and protects the system from all grounding problems. The module accepts any one out of variety of inputs. It accepts a currentvoltagetemperature input or 4 – 20mA DC from two wire transmitters “or” sensor. The unique design of the module requires only one single positive barrier at the input from a two-wire transmitter for intrinsic safety and isolates the control room. The module also accepts TC and RTD signals. The cold junction compensation is built in and up scale burn out is provided as standard features for thermocouple input ranges. As well as it can be equipped with an intrinsically safe current output.

    ...more
    Get Best Price
  • Signal Isolators

    Signal Isolators

    Request for Price

    Pantech's Signal Isolator, model 821 is an ideal instrument for providing isolation between input, multiple outputs and power supply. The module is an ideal choice when fanning out of process signal is required. It provides up to four output signals, each capable of driving of 800 ohms. All these outputs are isolated from each other, input and power supply. This ensures isolation between various subsystems and protects the system from all grounding problems. The module accepts any one out of variety of inputs. It accepts a currentvoltagetemperature input or 4 – 20mA DC from two wire transmitters “or” sensor. The unique design of the module requires only one single positive barrier at the input from a two-wire transmitter for intrinsic safety and isolates the control room. The module also accepts TC and RTD signals. The cold junction compensation is built in and up scale burn out is provided as standard features for thermocouple input ranges. As well as it can be equipped with an intrinsically safe current output. Model 821 is also equipped with an optional 3-½ digit seven segments LED display for process indication in percentage or engineering units. It is also facilitated with internal transmitter power supply of 24 V DC, to power up two-wire transmitters. Low drift precession components are used for long term accuracy of the instruments. All instruments undergo a burn-in for better reliability.The instrument is available in different formats and sizes. Information regarding specification and size is given below. Rugged & Time Proven Designs 2 wire 4 wire types Three Port Isolation – Opto and Galvanic Predefined Inputs Ranges Optional Display Bargraph features Wide Input Ranges type supported Transmitter P.S. @ 24V DC. Various sizes Mountings Enclosures supported

    ...more
    Get Best Price
  • SCANNER-890

    SCANNER-890

    Request for Price

    Pantech's Programmable Universal/Predefined input Scanner, model 890 is an ideal instrument for providing indication as well as controlling set points for various multiple processes. It is designed to accept various process inputs (Current, Voltage, RTD, and Thermocouple) simultaneously (or predefined) with facility of all inputs onboard field configuration, calibration and displaying the same. Two scanning modes are provided AUTO/MANUAL. It is normally designed to accept UPTO 32 different channels simultaneously. The instrument allows CHANNEL TO GROUP fixings, RELAYS to GROUP fixings . Detailed functions and configurations regarding these are explained beneath. The model is also equipped with an optional 4 analog outputs facility (Isolated or non-isolated). The model has optional in built RTC for providing timed data. The scanning time can be adjusted from 1 second to 99 seconds maximum through front keys. Unused channel SKIP facility is also provided in all versions. It can be optionally equipped with serial/parallel communication facility of different open protocols. In an extended version the same scanner can also be used as a DATA LOGGER with all the capabilities of a multi channel dataloggers ( Refer Model no. 891 ). The high end microprocessor program ensures the best and easiest possible user interactive modes. The EASE felt by the user in configuring the scanner is the real essence of product. Low drift precession components are used for long term accuracy of the instruments. All instruments undergo a burn-in for better reliability

    ...more
    Get Best Price
  • RTD Two Wire Transmitters-871

    RTD Two Wire Transmitters-871

    Request for Price

    Pantech's Two Wire Transmitters, model 871 is designed over low drift, low power components â Hence confirms the standard specifications of being a Xâmitter. It is designed to provide 4-20mA DC signal on the same two wires, which carry the 24 V DC.. This 4-20 mA DC signal is corresponding to the temperature measured by the RTD elements at the input of this 2-wire transmitter. The transmitter is an ideal choice for temperature measurement with RTDâs. It provides a current output signal of 4 â 20mA DC in a two wire loop, capable of driving a load of upto 650°. This eliminates needs to run compensating cable or three core cable between the field and control room.

    Power Supply : 24 V DC (22.5 to 28.0V) in two wire loop

    ...more
    Get Best Price
  • 857 RPM INDICATOR CUM CONTROLLER

    857 RPM INDICATOR CUM CONTROLLER

    Request for Price

    MODEL 857 RPM INDICATOR CUM CONTROLLER ( Microprocessor based & Fully Configurable ) Introduction Pantech's RPM Indicator cum Controller, model 857 is an ideal instrument for measuring the speed of any rotating part. The input signal can be pulses from any PULSE generating device . The basic feed in parameter for RPM calculation and display is PPR ( Pulse per Revolution Ratio ). Based on these feed ins, the instrument comes up with a definite display for SPEED. Model 857 is capable to display the RPM value to the resolution of maximum 44.5 digits with programmable range selection. However the RPM value is auto calculated, but this programmed range can set the value of retransmission signals which can be optionally taken from the instrument. Further it can be designed to generate maximum of 4 nos. of potential free contacts. All the configurations like : PPR, setpoints, alarm types, ZERO and SPAN for retransmission etc. can be done with the help of front keys only . It is also facilitated with internal transmitter power supply of 1224 V DC, to power up proximity sensors. The instruments are available in panel mounting as well as wall mounting versions. All models can be operated on 24V DC, 230V AC and 110V AC power supplies. Power supply is isolated from rest of the circuit. The instrument incorporates low drift operational amplifiers and industrial grade components for long trouble free operation. Burn in of each module ensures long trouble free operation.

    ...more
    Get Best Price
  • speed indicators

    speed indicators

    Request for Price

    Pantech's RPM Indicator cum Controller, model 857 is an ideal instrument for measuring the speed of any rotating part. The input signal can be pulses from any PULSE generating device . The basic feed in parameter for RPM calculation and display is PPR ( Pulse per Revolution Ratio ). Based on these feed ins, the instrument comes up with a definite display for SPEED. Model 857 is capable to display the RPM value to the resolution of maximum 44.5 digits with programmable range selection. However the RPM value is auto calculated, but this programmed range can set the value of retransmission signals which can be optionally taken from the instrument. Further it can be designed to generate maximum of 4 nos. of potential free contacts. All the configurations like : PPR, setpoints, alarm types, ZERO and SPAN for retransmission etc. can be done with the help of front keys only . It is also facilitated with internal transmitter power supply of 1224 V DC, to power up proximity sensors.

    ...more
    Get Best Price
  • Programmable Sequential Timer

    Programmable Sequential Timer

    Request for Price

    Pantech's Digital Timers, model 862, are designed to set time delays in the process. Microprocessor electronic circuit designs this particular unit. The instrument displays time parameter as a virtue of 45678 digit display as required by the user. One can set time through front keys. It can be field programmed in three modes:Sequential Timer: Single cycle & Multicycle (Programmable),ON Delay Timer.

    ...more
    Get Best Price
  • Pressure 2-Wire Transmitters-875

    Pressure 2-Wire Transmitters-875

    Request for Price

    Pantech's Pressure two wire transmitter, model 875 is ideal instrument to provide 4 â 20 mA DC signal on the same two wires which carry the 24V DC power for pressure measurement. The transmitter is an ideal choice for converting any pressure range to a current signal of 4 â 20 mA DC. It provides a current output signal capable of driving load upto 600Ω. The converter is available in field mounted housings with or without local digital display. The local 4-4.5 digit loop powered LCD display, also indicates the process value as per configurations. The transmitter is available in weatherproof or explosion proof housing. It is also available in housing suitable for wall mounting in control room. The modules incorporate state of the art pressure input integrated circuits, low drift operational amplifiers and industrial grade components. Burn in of each module ensures a long trouble free operation.

    Output : 4 – 20 mA DC in two wire loop

    ...more
    Get Best Price
  • 885 ALARM ANNUNCIATOR

    885 ALARM ANNUNCIATOR

    Request for Price

    Alarm annunciator microprocessor based model 885 introduction pantech's alarm annunciator, series 885, is an ideal instrument for indicating field fault conditions in the control room. It is designed to sense nonc potential free contacts for all the channels in a simultaneous mode. The high end microprocessor chips assures the response time in microseconds while sensing all the channels in round robin fashion. The audio and visual output is provided in the unit for alerting plant personnel when fault condition occurs. Controlling keys acknowledge, reset and test are provided on the front of the instrument. For remote controlling of the unit, same keys can be provided on the back plate. Pattern of rows and columns change with change in total channels. features of model 885 : response time is very fast. Pertaining to high end microprocessor chipsets on board. first fault feature availed. features like manualauto reset, ring back, first up are provided as optional. any no. Of channels windows possible ( for more then 36 nos. Check with factory ends ) enclosure mountings dimensions etc can be customised as per the user requirements. weatherproof, flame proof, ip65 grade – all type of enclosures available.

    ...more
    Get Best Price
  • SQUARE ROOT EXTRACTORS

    SQUARE ROOT EXTRACTORS

    Request for Price

    MODEL 836 - SQUARE ROOT EXTRACTORS Introduction Pantech's Square Root Extractor Module, model 836 is designed to provide linear output for the non-linear flow equivalent type signal. It provides an output of 4 – 20 mA DC capable of driving a load of upto 800. The input-output relationship can be defined as OUTPUT = SQUARE ROOT OF INPUT. The module accepts 4 – 20 mA DC signal from two wire and non two wire transmitters. The module also accepts 1 – 5 V DC signals. Output is a square root of the input. The instrument has a facility of TPS 24 V DC to power up two wire transmitters. In general version, the instrument is available in DIN RAIL version. The module is also available in Euro card format of 3U height and alternatively in a wall mounted housing. 20 Euro card modules can be housed in a 19” Euro card cage. The Euro card modules can be powered from 24V DC power supply whereas wall mounted modules can be powered from 110V AC or 230V AC too. Power supply is isolated from rest of the electronics.The modules incorporate low drift operational amplifiers and industrial grade components. Burn in of each module ensures long trouble free operation. Rugged & Time Proven Designs Three Port Isolation – Opto and Galvanic Predefined input, output & ranges Transmitter P.S. @ 24 V DC. Various sizes Mountings Enclosures supported

    ...more
    Get Best Price
  • Predefined Input

    Predefined Input

    Request for Price

    Pantech's Square Root Extractor Module, model 836 is designed to provide linear output for the non-linear flow equivalent type signal. It provides an output of 4 – 20 mA DC capable of driving a load of upto 800. The input-output relationship can be defined as OUTPUT = SQUARE ROOT OF INPUT. The module accepts 4 – 20 mA DC signal from two wire and non two wire transmitters. The module also accepts 1 – 5 V DC signals. Output is a square root of the input. The instrument has a facility of TPS 24 V DC to power up two wire transmitters. In general version, the instrument is available in DIN RAIL version. The module is also available in Euro card format of 3U height and alternatively in a wall mounted housing. 20 Euro card modules can be housed in a 19” Euro card cage. The Euro card modules can be powered from 24V DC power supply whereas wall mounted modules can be powered from 110V AC or 230V AC too. Power supply is isolated from rest of the electronics.The modules incorporate low drift operational amplifiers and industrial grade components. Burn in of each module ensures long trouble free operation.

    Power Supply : 24 V DC

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

Contact Information

Pantech Instruments

  • Ashish Pandya
  • No. 102, Shailja Complex 2, Near R. C. Patel Estate, Akota - Padra Road, Vadodara, Gujarat

Find Popular Repeaters Dealers in Vadodara

top