Pelican Valves & Engineering Works Rash Behari, Kolkata, West Bengal

CONTRUCTION DETAILSStrainer are made up of different materialsBody : Cast Steel AS TMA 216 Gr. WCB Stainless Steel ASTMA 351 Gr. CF8/8M Cast Iron IS 210 FG. 200/GM 85/5/5/5 Screen : SS 304/SS 316/Brass Screens with a mesh that ranges between 40 to 200 MicronsConnection : As per party’s requirement ANSI B 16.5. IS 6392. DIN, BS 10. & Screwed to BSPPressure : Depend upon Requirement & Rating

GENERAL MANUFACTURING STANDARD• Sizes 15 to 40mm NB – BS : 5150• Sizes 50 to 1200mm NB – IS : 14846/PD ALT-2• Sizes 50 to 300 mm NB – IS : 780/BS : 5150• Sizes 350 to 1200mm NB – IS : 2906/BS : 5150 END CONNECTIONSIS 1538/1S : 6392/BS : 10 Table D or E/ANSI 125 or 150/DIN SPECIAL REQUIREMENTS CATERED FOR Valves with all iron construction Valves for coke oven gas service Valves to ANSI, DIN & other national or international standards Valves in M.S. Fabricated / CS / SS construction OPTIONAL FEATURES : • Back seat arrangement • Spur / Worn / Bevel gear operation • Integral by-pass arrangement • Thrust Ball-Bearing arrangement •Guide Channel & shoe arrangement • Open & Shut Position Indicator • Drain plug arrangement • Chain & Chain wheel operation •Hand wheel Locking arrangement • Stand post & Extension Rod for remote operation • Electric / Pneumatic / Hydraulic Power Operation

Flange Dimensions & Drilling may be as per IS 1538/BS 10 ‘D’ / ASA 125 or to suit customer’s requirement Valves can also be offered in other material of construction

MATERIAL OF CONSTRUCTIONBody : Cast Iron to IS 210 FG 200Cast Carbon Steel to ASTM A 216 GR WCBMS Fabricated to IS 2062Stainless Steel to ASTM A 351 GR CF8 or CF8MScreen : Brass or SS 304 or SS 316 END CONNECTIONSFlanges may be laced and Drilled to IS or BS or ANSI or DIN Standard •  Screens of Brass or SS perforated sheet with a mesh of ranges between 30 to 200 microns as Desired by the customers •  Surface area of straining element la 2.5 times of flow area minimum •  Valves can be supplied higher sizes 40 to 1200 mm, If required

Construction : Bolted Bonnet, Outside screwed rising spindle. Body Materials : Cast IronTrims : Bronze / Stainless SteelEnd Connection : Flanged IS/BS/DIN/ASA/APIManufacturing Standard : IS : 9338 / BS : 1873Pressure Class : (PN 1.0 & 1.6)Sizes : 15 mm to 600 mmOther Features : Gear, by-pass, indicator, Head Stock, Extension spindle. Actuator operated, pneumatic operated. Valves generally conform to IS : 9338/BS : 5152 Flanges may be faced and drilled to BS : 10table’D’ or ‘E’ / ANSI B 16.1 CL 125/150/DIN Valves in pillar type, with Cast Iron cross head and MS pillar can be offered Valves to ASA or DIN standard can be offered Valves in angle type construction can be offered Valve above 300. mm can be offered OPTIONAL FEATURES :• Back Seat • Position Indicator • Drain Plug • Chain and Chain Wheel Operation

GENERAL MANUFACTURING STANDARD• Sizes 15 to 40mm NB – BS : 5150• Sizes 50 to 1200mm NB – IS : 14846/PD ALT-2• Sizes 50 to 300 mm NB – IS : 780/BS : 5150• Sizes 350 to 1200mm NB – IS : 2906/BS : 5150 END CONNECTIONSIS 1538/lS : 6392/BS : 10 Table D or E/ANSI 125 or 150/DIN SPECIAL REQUIREMENTS CATERED FOR• Valves with all iron construction• Valves for coke oven gas service• Valves to ANSI, DIN & other national or international standards• Valves in M.S. Fabricated/CS/SS construction OPTIONAL FEATURES :• Back seat arrangement • Spur / Worm / Bevel gear operation • Integral by-pass arrangement • Thrust Bad-Bearing arrangement • Guide Channel & shoe arrangement • Open & Shut Position Indicator • Drain plug arrangement • Chain & Chain wheel operation • Hand wheel Locking arrangement • Stand post & Extension Rod for remote operation • Electric / Pneumatic / Hydraulic Power Operation.

OPTIONALFEATURES Valves can be supplied with : (A) Locking system (hand wheel can be locked) (B) Chain wheel (for overhead pipe-lines) (C) Liver (quick acting) (D) Extended spindle ‘KB” Type (full way) Diaphragm valves Right angle diaphragm valves Diahragms : Natural Rubber, Neoprene Rubber, Hypalon, Teflon, Butyl or as per party’s specifications NOTES Valves manufactured as per BS 5156 Ranges faced and drilled to ANSI B16 i class 125 or customer’s requirement Valves with screwed ends shall have one of the following Sizes : 3/9, ½, ¾, 1, 1 ¼, 1 ½, 2 inch Valves shall be designated by the following nominal pressure : PN 6, PN 10, PN 16 Where a linning extends over the end faces the lace to face dimension is exclusive o1 the linning thickness Glass (Enamel) Linning for So, Gas Spark tested Glass Linning

Manufactured in Accordance with API 600/BS-1414 bolted bonnet with integral yoke outside screw rising stem suitable for repacking under pressure when fully open. Ends flanged and drilled to ANSI B16.5 with raised face, renewable seat, valves tested to API 598.

Manufactured in accordance with BSS 1868, Bolted cover, ends flanged and drilled to ANSI B 16.5 with raised face, renewable seat, valves tested to API 598 ANSI CLASS 150SIZES 40 mm to 300 mm ANSI CLASS 300Sizes 40 mm to 300 mm ANSI CLASS 600 Sizes 40 mm to 200 mm.

FEATURES Leak tight in both directions Soft seat on disc for ease of maintenance Fitted with generously sized geared operator Conforms to IS 13095 PN 1.0/BS 5155 PN 10/AWWA C504 Higher pressure rating on request Valve seat can be made of Silicon/Viton/Neoprene Rubber   DOUBLE FLANGED BUTTERFLY VALVES SI. No. DESCRIPTION MATERIAL SPECIFICATION 1 BODY C.I. IS:210FG:200 2 VALVE DISC. C.I. IS:210FG:200 3 BODY RING S.S. AISI : 304 4 RETAINER RING S.S. AISI : 304 5 VALVE SEAT RUBBER NITRILE 6 SHAFT S.S. AISI : 410 7 PIN S.S. AISI :304 6 BUSH G.M. IS:318LTB:2 9 ‘0’ RING RUBBER NITRILE 10 T RING G.M IS:318LTB:2 11 COLLER BUSH G.M. IS:318LTB:2 12 COVER PLATE M.S. IS : 226 13 ADOPTER PLATE M.S. IS : 226 14 LOCK WASHER S.S. AISI : 304 15 GEAR BOX C.I. IS:210FG:200 16 HANDWHEEL C.I. DO   NOTE Flanged drilling as per IS : 1538/BS : 10/BS : 4504 or as per requirement. Shaft dia. may be changed depending on working pressure. Gear box, Worm wheel, Matl. may be C.I./C.S./PH. Bronze Body seat may be pressed fitted or bolted which one replaceable Test pressure Seat = 6-16 kg/cm2 (max) BodY= 10 – 24 kg/cm2 (max)

MATERIALS:Body/Side Piece : C.S. ASTM A 216 Gr. WCBC.I. IS 210 Grade FG 200SS316.SS304GM 85/5/5/5.Ball: SS 304orSS316.Body Gasket, Seat, Stem Seal: PTFE (Teflon)Lever: Malleable Iron/M.S. DESIGN FEATURES: Regular or Full Port. Single Piece. Two Piece & Three Piece Design. End connection in Screwed, Flanged or Socket Weld. F to F as per ASA 150, 300 or as per requirement. Also available in fire safe, jacketed design. Lever operated, Gear operated or can be fitted with actuators. High flow capacity with negligible pressure loss. Positive shut off with quarter turn operation. Secondary metal seats gives an effective metal to metal seal after the destruction of the PTFE seats Tested up to 50 kg/Cm2 & withstand temperature up to 400 Deg. C depending on material of construction