Prime Industrial Valves Mfg. Co. Rakhial, Ahmedabad, Gujarat

  • wafer swing check valve

    wafer swing check valve

    Request for Price

    Wafer swing check valve Special Features Like Stelliting, Shorter overall length, mounting requires minimum space. Seat Leakage : Zero Leakage, Tight Shut Off.

    ...more
    Get Best Price
  • Thermodynamic Steam Trap

    Thermodynamic Steam Trap

    Request for Price

    We are offering thermodynamic steam trap. technical detail screwed ends : ansi b 1.20.1 socket weld ends : ansi b 16.11 specification & features inbuilt strainer : avoids clogging screwed female bsp taper ends socket welded ends hardened disc to withstand continuous water hammering all stainless steel construction : better mechanical properties seat integral with body : no possibility of leakage from joints

    ...more
    Get Best Price
  • Steam Valve

    Steam Valve

    Request for Price

    Steam valve High velocity of flashing condensate create low pressure beneath the disc, at the same time pressure is build up in the chamber that force the disc on the seat. Now the condensates in the chamber decrease the pressure and when it is lower then the inlet pressure, the disc lifts. This cycle repeats again and again.

    ...more
    Get Best Price
  • Needle Valve

    Needle Valve

    Request for Price

    We are offering needle valve. features bar stock needle valve design with back seated blow out proof. stem- ground and thread rolled hard seat with non rotating stem tip with rotating stem tip regulating & soft seat. dust cap on bonnet pusher protects stem threads from external contamination. Packing and sealing are leak tight for easy operation low torque operating bar handle extremely adjustable gland bonnet lock pin fitted as standard for 6000psig and for high pressure lock plate as per the design required.

    ...more
    Get Best Price
  • Motorised / Pneumatic/Cylinder Operated Control Valve

    Motorised / Pneumatic/Cylinder Operated Control Valve

    Request for Price

    We are offering motorised / pneumatic/cylinder operated control valve. technical detail testing & inspection std : ansi b 16.37 api:598 seat leakage std. : fci-70-2 isa-rp-39.6 end connection : flanged ends as per ansi b 16.5 150# & 300#

    ...more
    Get Best Price
  • METALIC FOOT VALVE

    METALIC FOOT VALVE

    Request for Price

    We are offering metalic foot valve. flanged end connections : the prime silent seat foot valve has low head loss through its full ported body area and heavy duty stainless steel basket screening. As pressure increases, the buna-n quad ring is compressed slightly and the disc makes contact with the metal portion of the valve seat, preventing any further compression of the ring. The buna-n quad ring will continue to provide “drop-tight seating” during the higher pressure ranges without damage from the increased pressure loading. A foot valve should be used with basket strainers and check valves.

    ...more
    Get Best Price
  • ibr valves

    ibr valves

    Request for Price

    IBR valves Flanged ends as per ANSI B 16.5 & 26” and above ANSI B 16.47 Series A & B. With Gear Operation if the Torque Exceeds 350N, With limit Switch Arrangements for open & Close Position.

    ...more
    Get Best Price
  • Globe Valve

    Globe Valve

    Request for Price

    We are offering globe valve. design & testing standard manufacturing standard :bs:1873 testing & inspection std : api:598 end connection : flanged ends as per ansi b 16.5 & 26” and above ansi b 16.47 series a & b butt weld ends : as per ansi b 16.25 shell wall thickness : ansi b 16.34 special features with gear operation if the torque exceeds 350n with limit switch arrangements for open & close position with electrical actuator with stelliting with ibr certification with nace mr 0175 with position indicators with locking arrangement

    ...more
    Get Best Price
  • Gate Valve

    Gate Valve

    Request for Price

    We are offering gate valve. technical detail manufacturing std : api:600 testing & inspection std: api:598 face to face : ansi b 16.10 end connection : flanged ends as per ansi b 16.5 & 26” and above ansi b 16.47 series a & b butt weld ends : as per ansi b 16.25 shell wall thickness : ansi b 16.34 special feature with gear operation if the torque exceeds 350n with limit switch arrangements for open & close position with electrical actuator with stelliting with ibr certification with nace mr 0175 with position indicators with locking arrangement

    ...more
    Get Best Price
  • Forged Steel Globe Valve

    Forged Steel Globe Valve

    Request for Price

    Forged steel globe valve Memory Seal Seats Compensate automatically for wear and fluctuations of pressure and temperature. Solid cup and cone type PTFE Stem Seal- Adjustable. Stem bearing in Gland nut reduces Side thrust effect.

    ...more
    Get Best Price
  • Forged Steel Ball

    Forged Steel Ball

    Request for Price

    Forged steel ball Memory Seal Seats Compensate automatically for wear and fluctuations of pressure and temperature. Stem bearing in Gland nut reduces Side thrust effect. RPTFE stem washer prevents galling, reduces torque and provides secondary seal.

    ...more
    Get Best Price
  • Flush Bottom

    Flush Bottom

    Request for Price

    We are offering flush bottom. standard end connection : ansi b 16.5 din:2501 bs:10 pressure temp. Rating : ansi b 16.34 actuator : diaphragm actuator (option) flow characteristic : on off flush bottom valves prime valves have been proven in service application for over 35 years. Prime flush bottom valves (tank valves) are designed to provide drainage and dead space free shutoff for reactors, vessels and storage tanks. The dead space free shutoff is accomplished by placing the valve seat flush with the bottom of the vessel. This eliminates any buildup of product within the vessel nozzle itself.

    ...more
    Get Best Price
  • Check Valve

    Check Valve

    Request for Price

    We are offering check valve. technical detail manufacturing std : bs:1868 testing & inspection std : api:598 bs:6755 (part-i) face to face : ansi b 16.10 end connection : flanged ends as per ansi b 16.5 & 26” and above ansi b 16.47 series a & b butt weld ends : as per ansi b 16.25 shell wall thickness : ansi b 16.34 special features with stelliting with ibr certification with nace mr 0175

    ...more
    Get Best Price
  • CENTER DISC LUG TYPE BUTTERFLY VALVE

    CENTER DISC LUG TYPE BUTTERFLY VALVE

    Request for Price

    We are offering center disc lug type butterfly valve. design feature the unique center line seat and disc design insures positive valve sealing while maintaining low seating torque. all center line butterfly valve discs are precision machined to a half ball profile, providing a precise disc to seat relationship. center line’s cartridge style seat incorporates an elastomeric bonded to a phenol stabilizing ring, eliminating elastomeric movement and reducing seat tearing or fatiguing due to bunching. center line’s basic three bushing design completely isolates the valve shaft from the body, resulting in increased control of the valve disc, lower valve seating torque, and longer valve life. the center line cartridge seat has a much smaller mass of elastomeric than traditional boot seat designs, limiting seat swell and the accompanying variations in seating torque.

    ...more
    Get Best Price
  • Ball Valve

    Ball Valve

    Request for Price

    We are offering ball valve. Technical detail design & manufacturing std : api:6d testing& inspection std : api:598 api:6d face to face : as per ansi b 16.10 end connection : fe drill as per ansi b 16.5 150#,300#,table-d,e,f

    ...more
    Get Best Price
  • Industrial Valves

    Industrial Valves

    Request for Price

    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers
  • Year of Establishment 1970
  • No. of Employees 50 - 100
  • Annual Turnover Rs. 5 to 25 Crore Approx.

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
Prime Industrial Valves Mfg. Co. is Retailer of Industrial Valves, Gate Valve, Globe Valve, Check Valve, Ball Valve, CENTER DISC LUG TYPE BUTTERFLY VALVE, METALIC FOOT VALVE, Thermodynamic Steam Trap, Needle Valve, Motorised / Pneumatic/Cylinder Operated Control Valve from Ahmedabad, Gujarat.
Read More »

Contact Information

Prime Industrial Valves Mfg. Co.

  • Ahad
  • A100-103 & 112-115, AJit Mill Compound ,Opp.Maniar Trailor,Rakhial,Ahmedabad - 380023, Gujarat
top