Prochem Systems ( India ) Pvt. Ltd. Kalas, Pune, Maharashtra

We are Spray Cooler System Manufacturers. Spray cooler is technology adopted for the material of wax category. The material is to be sprayed is kept in molten condition in the steam jacketedhot water jacketed vessels. From the jacketed vessels it is transferred to the feed vessels by the jacketed feed pumps with the help of positive displacement pump. (It is also steam jacketed) The molten mass is pumped & sprayed in chamber & droplets are converted to fine particles. At the same time the cold air is passed on this molten mass through the uniform air distribution system in the spray chamber. The heat of the fine particles is liberated & particles are cooled. The spray cooled particles further passes to the spray cooler conveying duct, cyclone, Secondary Cooler etc.

The rotary dryer is one of the most common types of industrial dryer, it is a cylindrical shell usually constructed from steel plates, slightly inclined and is usually operated with a negative internal pressure to prevent dust escape. Large quantities of granular material up to particles of 10 mm or larger that are not too fragile or heat sensitive or cause any other solids handling problems are dried in rotary dryers.Rotary dryer system manufacturers, Rotary dryer system manufacturers Solids introduced at the upper end through the feed hopper and screw feeder assembly, material start moving towards the lower or discharge end. Depending on the arrangement for the contact between the drying air and the solids, a dryer may be classified as direct or indirect, co-current or counter-current. Feed material lifting flights of various shapes is constructed inside the shell to shower the solids in order to ensure contact with the hot air. These flight configurations vary from spirals to straight flights depending upon the material to be dried.

We are Paddle Mixers System Manufacturers. Paddle mixers are works on the principle of fluoridation, only the material is fluidized by the mechanical means i.e. paddles fitted on the shaft and configured with different paddle angels; it mixes materials by scooping, lifting and agitating them in a gentle way, but thorough mixing action. This range of mixer is widely used for mixing solids or liquids of different particle size, viscosity and density.Paddle Mixers System Manufacturers, Plough shear mixer is designed the overlapping of shovels coupled with its shape and the high speed of the ploughs produces good mixing action and high turbulence.

These processes vary from drying, cooling, crystallizing and calcimining to melting, evaporating, solvents, etc. The Product is fed into the front of the machine. The Trough is oriented at a small angle of inclination, Placed slightly in the unloading position. The product moves to the outlet as a result of gravity. The steam or Thermic fluid is injected through the Hollow shaft; the paddle is also hollow in construction due to which the drying of the material takes place instantaneously.