Constant Pressure System Dealers (18 products available)

Franklin Electric's SubDrive Inline 1100 provides constant pressure for both private wells and municipal water systems, A complete and packaged system (Pump, motor, drive and pressure sensor in one box), Small and compact design - Fits into small areas, even between floor joists, Built in system protections guard the Inline unit from many common failure modes including: surge protection, voltage underload, locked pump, open circuit, short circuit and overheated controller, Multiple mounting configurations - Install units where you need them: horizontal, vertical & even upside down.

he SubDrive QuickPAK Submersible Constant Pressure System is an all-in-one package backed by Franklin’s commitment to quality, availability, service, innovation and value. SubDrive QuickPAK includes: Franklin pump Franklin motor SubDrive variable frequency controller Pressure sensor   Boosted and constant water pressure from water storage/cistern systems Homes – both in private and municipal applications General pressure boosting Sprinkler systems Farming and commercial wash down systems Golf courses Nursing homes Hair and beauty salons SubDrive QuickPAK is Franklin’s popular system solution package, designed to simplify the installation of a constant pressure system. Motor, pump and drive in one package Selection based on flow and total dynamic head NEMA 1 and NEMA 4 drive enclosures available Soft start feature prevents water hammer and increases motor life Works with small or large pressure tanks, even works with an existing tank Smart Reset® technology allows well recovery before restarting the pump Excellent radio frequency interference shielding The SubDrive QuickPAK includes: Variety of flow rates available in: 7, 10, 25, 35, 60 and 90 gpm Flexible power inputs featuring single-phase input power with three-phase motor performance, using 1.5 – 3 hp motors

Franklin Electric's SubDrive Inline 1100 provides constant pressure for both private wells and municipal water systems. Features: A complete and packaged system (Pump, motor, drive and pressure sensor in one box) Small and compact design - Fits into small areas, even between floor joists Stainless steel construction - Made for years of operation Simple and easy installation - Step-by-step illustrated instructions Quiet and cool operation - Integrated motor design allows water to flow around it NEMA 4 (IP56) electronics enclosure Multiple mounting configurations - Install units where you need them: horizontal, vertical & even upside down Product power rating: 1.2 hp, 0.9 kW Shipping weight: 50 lbs, 22.7 kg Built in system protections guard the Inline unit from many common failure modes including: surge protection, voltage underload, locked pump, open circuit, short circuit and overheated controller.

This is a Dead-Weight type constant pressure system. This system consists of an oil pump, continuously driven by an electric motor to provide the required pressure to the Triaxial Cell chamber. Capacity: 160 bar (160 kg/cm2)

Feet provide the primary surface of interaction with the environment during locomotion. Thus, it is important to diagnose foot problems at an early stage for injury prevention, risk management and general wellbeing. Although plantar pressure data have been recognized as an important element in the assessment of clients with diabetes and peripheral neuropathy, information derived from plantar pressure data also can assist in determining and managing the impairments associated with various musculoskeletal and neurological disorders. Plantar pressure measurement systems identify and quantify areas of high pressure, helping you diagnose the root cause of lower extremity problems and design more effective offloading devices.The Foot Scanner Podiascan system provides podiatrist and biomechanists with an economical and efficient method to measure static / dynamic plantar foot pressure distribution. The Footscan Podiascan system produces instantaneous and permanent high resolution image of the pressure distribution across the plantar surface. The Foot Scan system Podiascan consist of a Harris mat / Foot Imprinter model FM1111, Windows based image analysis software and patient reporting software. HP make Scanner copier printer model HP 2050 series or equivalent is an optional item. By using our Harris mat in conjunction with scanner and image analysis software, the system produces an enhanced full colour representation of the sole of the foot. We introduced this Original concept in India as early as 2005.Features : Uses Foot Imprinter recording paper Low cost device Software supports Windows Xp, 7, 8 and 10 operated computer Footwear measurement can be entered in the software ABI, VPT, MF scores and measurements can be added in the report Software converts even a very light image without dropping the image Export in pdf option Patient report can be directly emailed from software to a footwear supplier Data backestore Original design Diagnostic uses include : Identifying areas of potential ulceration Pre and Post surgical evaluation Determining the degree of pronation and supination Screening diabetics and other neuropathy patients Monitoring regenerative foot disorders Determination of orthotic efficacy PODIASCAN system is supplied with Foot Imprinter Harris Mat(with accessories), An interface box to computer, A licensed software with hardlock to capture and convert the gray scale image inot a multi color scale and generates a patient report.Product Code : Podiascan

The apparatus is designed to provide confining pressure upto 160 Bar to triaxial cells.The system consists of an oil pump, continuously driven by an electric motor during the entire period of operation to maintain the desired pressure. The unit provides continuous variable pressure upto 160 Bar, which can be increased or decreased, simply by turning a control knob.

Constant Pressure Systems (AIM 081-1, AIM 082)   Constant Pressure Systems are meant for maintaining the pressure in the triaxial cell constant by automatically compensating for the fluctuation of cell pressure taking place as a result of volume change occurring in the cell due to expansion of the specimen under high pressure, entry of the loading plunger into the cell, consolidation of specimen, etc. Constant Pressure Systems are usually employed to ensure accurate performance of such types of Triaxial Shear tests (consolidated undrained test on clayey soils and drained test on most of the soils) where maintenance of the set pressure constant over a long period is essential.We supply a range of Constant Pressure Systems-Mercury water type, Oil water type and Air water type.   Application Constant Pressure Industry Chemical/Process Agricultural Civil Infrastructure Dams & Tunnels Geophysical/ Seismology Testing Geotechnical (soil/ rock) Testing Irrigation Mining Real Estate Roads, Highways & Bridges Education Architecture Building Technology Civil Department Geotechnical Mining Engineering Science Colleges Traffic & Transportation Railways Roads, Highways & Bridges

Product Code: EKE 082 Measurement of volume of fluid entering the cell to compensate the change in volume of the sample The volume of fluid expelled from the pore space of the soil The direct measurement of the change in lenth and dia of the sample. This constant pressure system is operated with pneumatic pressure when applied through a compressed air line.Its simple to use an air water constant pressure especially where more than one outlet are to be taken from a single source. Equipment is provided with three air water interface chambers with individual reegulators to control the outlet pressures at desired pressure levels.The interface chambers are provided with acrylic plastic chambers and two ball valves for outlet and intel of water.The chambers are fixed over a console which houses the three regulators and three pressure gauges.   

• Working Temperature: 400C to + 1000C(continues)

Intermittent Temperature : 400C to + 1200C(10% of total working hours) For air application (Temp.max 700C) & pressure above 17 bar cover must be pin pricked. Special MSHA approved flame resistant outer cover can be provided on request.

Dead Weight Type Oil Water Constant Pressure System For Testing Lab   NAUGRALABS LABORATORY PRODUCT NAME: DEAD WEIGHT TYPE OIL WATER CONSTANT PRESSURE SYSTEM FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-015057 Description and Specification for Lab Tenders Dead Weight Type Oil Water Constant Pressure System.  This device is used to maintain cell pressure constant for a long duration and the system can be used in place of convensional constant pressure system using mercury posts where certain minimum heights are required.  Problems like deairiation of pump, leakage of mercury etc. are eliminated in this system. This unit is smaller in volume and can be used in mobile laboratory also. This can maintain pressure in the cell upto 20 kg/cm.sq. Pressure is maintained constant in the system by a balancing calibrated weights on a spindle against a column of oil, operating under constant feedback. Salient Features Construction :The system consists of an oil pump continuously driven by an electric motor during the test period. The internal components are housed in a strong compact housing. The piston on which weights are kept rotates with minimum friction. A transparent Oil Water vessel is provided on transmit pressure to the cell. A hand pump provided facilitates priming and to maintain constant pressure during power failure.Specifications : Range 0-20 bar (0-20 kg/cm²) Steps of Pressure 0.5 bar (0.5 kg/cm²)Accuracy +0.5%Electric Supply 230 Volts, Single Phase, 50 Hz, A.C.supply Supplied complete with Pressure Guage, flow valves, connecting Pressure hose and set of weights to give maximum pressure of 20 bar (20 kg/cm²). civil lab equipments manufacturers  Soil Testing Lab equipment manufacturers,exporters and Soil Testing Lab suppliers

Our company is one of the renowned Manufacturers, Exporters and Suppliers of the Dead Weight Type Oil & Water Constant Pressure System. We manufacture the Dead Weight Type Oil & Water Constant Pressure System using high-quality raw materials and lay emphasis on the timely delivery of the Dead Weight Type Oil & Water Constant Pressure System. The Dead Weight Type Oil & Water Constant Pressure System is used to maintain cell pressure constant for a long duration and the system can be used in place of conventional constant pressure system using mercury pots where certain minimum heights are required. Problems like de-airation of pump, leakage of mercury etc. is eliminated in this system . The Dead Weight Type Oil & Water Constant Pressure System is smaller in volume and can be used in mobile laboratory also. The Dead Weight Type Oil & Water Constant Pressure System can maintain pressure in the cell upto 20kgcm sq. Pressure is maintained constant in the system by a balancing calibrated weights on a spindle against a column of oil, operating under constant feedback. Construction The system consists of an oil pump continuously driven by an electric motor during the test period. The internal components are housed in a strong compact housing. The piston on which weights are kept rotates with minimum friction. A transparent oil water vessel is provided to transmit pressure to the cell. A hand pump provided facilitates priming and to maintain constant pressure during power failure. Specifications Range 0-20 bar(0-20kgcm2 )Steps of pressure 0.5bar (0.5kgcm2 )Accuracy + 0.5%Electric supply 230 V, Single Phase, 50 Hz, A.C. supplySupplied complete with pressure gauge, flow valves, connecting pressureHose and set of weights to give maximum pressure of 20 bar (20 kgcm2)

Constant Pressure system, mercurywater type, two double unit 0-10 kgcm. sq. (10 bars). Supplied with ca control panel suitable for wall mounting and fitter with a pressure pump with a screw controlled piston, pressure gauge. Winding mechanism, a small water reservoir and valves necessary for filling water reservoir and valves necessary for filling, de-airing and applying the required pressure. Consists of: Control panel with pressure pump, pressure gauge, polythene bottle, valves, gear box with spoon and handle, cable guide a connection tube.

constant pressure system, Construction Machinery, Construction Hoist

constant pressure system, Hydro Pressure Pump

constant pressure system, Construction Machinery, Construction Chemicals

constant pressure system, civil construction, Building Materials

Water Constant Pressure System, subsonic wind tunnel, toxicity test apparatus

Constant Pressure Water- Supplying System