Automatic Power Factor Control Panel
1 Piece (MOQ)
Size : Multisizes
Type : APFC PANEL
Application : Control Panel
Color : Grey
Voltage : 220V
Body Material : Mild Steel
Power : 1-3kw
Power Source : Electric
Phase : Double Phase, Single Phase, Three Phase
TECHNICAL FEATURES : Microprocessor Based Automatic Controller With Power Display. All Major Components Are Of Standard Makes Like, Siemens, L&T, Epcos, Neptune Etc. All The Components Are Carefully Integrated For Reliable Performance And Longer Life. Used Small Correction Steps To Maintain Accurate Setting. Contactors (With MCBs Or MCCBs As Backup Protection) Are Used To Switch On Capacitors With Spiral Cond uctor Design To Minimize Switching Surges. Cooling Facility In Capacitor Chambers. In-built Time Delay For Switching ON Of A Capacitor Bank To Avoid Impulse Signal Operation. All Capacitor Feeders Have Auto/ Manual Mode Facility With Fuse/MCB Protection And Isolation. Very Low Watt Losses, Capacitors Are Used.
Automatic Power Factor Control Panel
1000 Piece (MOQ)
Application : Control Panel
Voltage : 220V
Body Material : Mild Steel
Power Source : Electric
Warranty : 2 Years
Autoamatic Grade : Automatic
An APFC panel consists of multiple capacitors of different ratings whose switching can be controlled as per requirement. An APFC panel is effective as a single point installation which can be used to control power factor for large number of loads instead of installing capacitors at the individual location of each load. These are mainly used for the improvement of power factor.
Power Distribution Control Panel
Application : Industrial Use
Frequency : 50hz, 60hz
Tensile Strength : 0-25Mpa
Feature : Proper Working, Sturdy Construction, Superior Finish
Phase : AC Single Phase, AC Three Phase
Temperature : High Temperature, Low Temperature, Medium Temperature
Automation Grade : Fully Automatic
Automatic Power Factor Control Panel
1 Piece (MOQ)
Size : Multisizes
Type : APFC PANEL
Application : Control Panel
Color : Grey
Body Material : Mild Steel
Power : 1-3kw
Power Source : Electric
We manufacture optimum quality APFC Panels. APFC Panels means Automatic Power Factor Correction Panels. Owing to their energy efficient design, longer serving life, high performance and low maintenance, these APFC panels offered by us are highly demanded in the market. These offered APFC Panels can be customized in accordance with the requirements and demands provided by the customers.Our presented APFC Panels are best in working and finely prepared by using best components and other accessories. These panels are light in weight and easier to install without any damage. Durable in frame, these panels are damage resistant and do not get damaged due to longer life working and other effects.
Power Distribution Control Panel
200,000 Per Piece
1 Piece (MOQ)
Application : PLC Automation
Color : Grey
Cooling System : Air Cooling
Warrenty : 1 Year
Brand Name : Prratek
MCB Count : TPN
IP Rating : IP 55
Material : Mild Steel
Thyristor Power Control Panels
We are manufacturer of wide range of both standard and custom engineered Thyristor/SCR power panels from 100W to 750KW. Thyristor control panels are extensively used in large and heavy industries that involve process where heaters are required. This panel is designed as per application and customer needs.SCR power control panels are engineered with safety and ease of installation in mind. The control panels are prewired and tested on name plate voltage. Customer needs only to install incoming power wires, outgoing heater wires and thermocouple input connections.Standard Features include : SCR Power Controller – Single or Three Phase; Phase Angle Fired or Zero Voltage Switched Powder coated enclosure. Fan cooled or air conditioned Input power circuit breaker or fused disconnect with door interlock Definite purpose power contactor in front of SCR Power On-Off Button Manual reset button Power on indication (lamp)
Industrial Automatic Power Factor Correction Panel
1,150 Per Units
1 Units (MOQ)
Country of Origin : India
Phase : Single
Frequency : 50 Hz
Brand Name : Treffer
Usage/Application : Industrial & PF improvement
Voltage : 400,415,440,525,690,800,1200V
Rating : 50,4000Kvar
Solar Power Panel
49,000 Per Piece
1 Piece (MOQ)
Certification : CE Certified
Application : Industrial and Residential
Weight : 10-100kg
Power Source : Solar
Efficiency : 90%
Operating Voltage : 24V
Solar power : 10 Kw
Power Factor Correction Panel
Compensation for momentarily changing load required automatic & manual free operation. SUDHAN will provides you the automatic PF correction panels of enhanced quality. Nature of load will decide Contactor or Thyristor based Power Factor Correction Panel will suit to your requirement. Use of microprocessor based intelligent controller helps to take action about electrical network status with fine RMS measurement and take complex decision of connection and disconnection of capacitor banks to maintain targeted power factor.
Solar Power Panel
India is a country that enjoys abundant sunshine all year through but it is this very sunshine that makes us consume more electricity. We all use fans, coolers, air-conditioners and refrigerators 24 hours, almost all year through, thus running up high electricity bills. Add to that the woes of unplanned power cuts and you are forced to depend on high cost, unreliable grid electricity.
Solar Power Panel
Operating Voltage : 24 V
Warranty : 10 - 25 Years**
Open Circuit Voltage : 21.40 V
MNRE Approved : Yes
Power : 325w
Automatic Power Factor Control Panels
With the vast development of industries, there is a rise in the penalties imposed by the state electricity boards/utility companies due to poor power factor a exceeding the maximum demand. This forces the consumers to search for a system that is capable of taking are of both power factor and maximum demand. The Automatic power factor correction panels (APFC) Is used in avoidance of power factor penalty and also helps to save energy by consistently maintaining higher power factor. Power Factor correction(APFC) panel In order to Avoid penalty for lower power factor 0 Enjoy incentives for higher power factor operation being extended to industries by some electricity board Optimize the connected load for improved plant load factor Avoid manual disruption Avoid high current consumption losses Improvement in voltage regulation Reduction in Energy(KWH) consumption Longer life of the existing electrical distribution components like transformer, switchgear, cables etc. Decrease maximum demand I KVA, thus avoiding penalty and excess demand charges
Automatic Power Factor Correction Panel
Brand : Rij
Application : Industrial
Phase : 3 - Phase
Automation Grade : Automatic
IP Rating : IP 22/ IP 42 /IP 54/ IP 55 -As per requirement
Voltage : 380-600V
Working Temp : 40-55 Deg C
Frequency : 50-60 Hz
Automatic Power Factor Correction Panel
We offer unmatched automatic power factor correction panels, and provide effective and reliable power management solutions to customers across industries. We also design apfc according to the clients’ requirements. These panels are installed at the induction load areas where the power factor comes down. Apfc is generally installed in big factories, corporate offices, etc.
Outdoor Panel
We are offering outdoor panel we offer high performance out door panels that are designed using quality material and the best technology. We also offer customization facilities in our range as per the specific requirement of our clients. These panels are highly appreciated by our clients for their high performance, rugged designs and easy installation. Send inquiry.
Power Distribution Panels
We manufacture these Panels to control power production and distribution so as to protect the equipments and also to provide safety operation to the operator and the plants. Panels used to diverse industrial applications and to get good productivity with protections. >> Features: • Robust Fabricated Design • Corrosion proof , Shock proof & Abrasion resistant • Safe to provide supply to other panels in the fields. • Durable • Easy operation & Longer service life
Foldable Solar Power Panel
7,000 Per Piece
Weight : 0.10 - 4.90 Kgs
Short Circuit Current : 0.80 - 2.80 A
Maximum Power Voltage : 8.3 - 17.6 V
Maximum Power Current : 0.45 - 2.85 A
Frequency : 50-60 Hz
Maximum Power : 250 W
Type of Solar Power Panel : Mono Crystalline
Open Circuit Voltage : 11 - 21 V
Rooftop Solar Power Panel
40,000 Per Piece
Country of Origin : Made in India
Material : Poly Carbonate
Voltage : 12 v
Warranty : 3 Year
Power : 1 kw
Frame Material : Aluminium
Power Control Panel
Our product the Automatic Power Factor Control Panel is one of its kinds with its robust build and dimensionally corrects designs. These power factor control panels are corrosion resistant and are shock proof as well. Automatic power control panel (APFCP), accurately monitors the reactive power in power systems and thus saves electrical power and energy. They are equipped with capacitors with series reactors which minimize the harmonic current and alter the system voltage and current. Enclosed in high quality rust proof steel, the panels are durable. Features : Fully AutomaticBased on programmable micro controller technologySelects capacitor banks through VAR sensing principleAutomatic scrolling of voltages and currents in three phase viz. KW, RKVA, KVA and PF through LCD displayLow and high voltage protection Applicable in : Water pumpsHeavy machineryIndustrial equipmentMedical & office equipmentAutomotive industry
Automatic Power Factor Correction Panel
Enlisted amidst the renowned Suppliers of Automatic Power Factor Correction Panel, we cater to varied demand of the customers in this sphere. We are acknowledged for entertaining voluminous orders at a time as we are supported by streamlined inventory management system and capacious storage facility. MODEL : T-APFC Specification: 50Hz APFC panel is integrated with CRCA MS Sheet encloser with powder coated, fully wired with self-healing MPP capacitors, capacitor duty contactors, capacitor fans, APFCR, all switchgear with IP protection , busbar AL/CU with IEC STD. Details : Rating : 50… 4000Kvar Voltage: 400/415/440/525/690/800/1200V Application: PF improvement