Repute Industries Gondal, Rajkot, Gujarat

A CNC MACHINE FOR PRODUCTION OF DIFFERENT TYPES OF WIRE BENDS. ANY 2D WIRE BENDS AT VARIOUS ANGLES AND RADIUS CAN BE ACHIEVED. A SIMPLE PROGRAMMING LANGUAGE OF CNC CONTROLLER ENABLES EASY PROGRAMMING OF THE PART WITH CONVENTIONAL G AND M CODES. A DESKTOP SOFTWARE PROVIDED WITH THE MACHINE IS CAPABLE TO CONVERT DRAWING TO MACHINE LANGUAGE. FEEDING AND BENDING ARE CNC AXIS AND WIRE CUTTING IS ACCOMPLISHED WITH A HYDRAULIC CUTTER. PNEUMATIC PRESSURE OVER FEED ROLLS ASSURE UNIFORM PRESSURE. A WIDE BASE PLATFORM GIVES SUPPORT TO LARGER BENDING PARTS.

THIS UNIVERSAL AUTOMATIC SPRING COILING MACHINE IS FOR THE FULLY AUTOMATIC PRODUCTION OF LEFTRIGHT HAND COILED SPRINGS OF THE COMPRESSION OR TENSION TYPE, WITH CLOSED END COILS, CYLINDRICAL TAPERED OR DOUBLE TAPERED AND OTHER SHAPED SPRING. PRESSURE ON THE WIRE IS ADJUSTED BY MANUAL SCREWING OF INDIVIDUAL FEED ROLLS. A COMBINED SLIDE IS PROVIDED TO VARY THE DIAMETER OF SPRING WITH EASE. EASY SWITCHING OF LEFTRIGHT HAND SPRING PRODUCTION. EASY SWITCHING OF PITCH OPENING FUNCTIONS. A SEPARATE CUTTING UNIT ENSURES EASY CUTTING OF WIRES OF LARGE WIRE DIAMETER. AN INCHING ARRANGEMENT IS PROVIDED FOR EASY SETTING OF THE MACHINE DURING INITIAL SETTING OPERATION. INDIVIDUAL CUTTING OPERATION ENABLES TO CUT THE WIRE FROM MIDDLE CYCLE OF SPRING TO ENSURE MINIMUM WASTAGE OF WIRE.

Wire Diameter : min.0.1mm

THIS MACHINE IS FOR FULLY AUTOMATIC PRODUCTION OF ROLLING SHUTTER SPRINGS. THE MACHINE IS SPECIALLY DESIGNED TO FULFILL THE REQUIREMENT OF ROLLING SHUTTER SPRING INDUSTRY. THE MACHINE IS CAPABLE TO MAKE ROLLING SHUTTER SPRINGS FROM 5MM TO 10 MM WIRE DIAMETER WITH LEFT HAND AND RIGHT HAND COILING SIMULTANEOUSLY TO MAKE BOTH THE SPRINGS IN EQUAL QUANTITY. THIS FEATURE IS ESPECIALLY FOR ROLLING SHUTTER SPRING INDUSTRY WHERE LEFT HAND AND RIGHT HAND SPRINGS ARE USED IN ALMOST EQUAL QUANTITY. THE SPRING DIAMETER IS TO BE SET IN MANUAL SETTING. AFTER THE SPRING DIAMETER IS SET, THE WIRE LENGTH IN ONE SPRING IS TO BE SET IN HMI. THE MACHINE SENSES THE WIRE FED IN REAL TIME AND STOPS FEEDING WIRE WHEN REQUIRED WIRE LENGTH IS ACHIEVED. THE SPRING IS THEN CUT AT THAT LENGTH. THE MACHINE CAN PRODUCE MINIMUM OF 1.5 TON SPRING PRODUCTION IN WEIGHT WITH SMALLEST WIRE. FOR LARGER WIRE, PRODUCTION IS EVEN HIGHER IN WEIGHT.

THIS MACHINE IS FOR FULLY AUTOMATIC PRODUCTION OF ROLLING SHUTTER SPRINGS. THE MACHINE IS SPECIALLY DESIGNED TO FULFILL THE REQUIREMENT OF ROLLING SHUTTER SPRING INDUSTRY. THE MACHINE IS CAPABLE TO MAKE ROLLING SHUTTER SPRINGS FROM 5MM TO 10 MM WIRE DIAMETER WITH LEFT HAND AND RIGHT HAND COILING SIMULTANEOUSLY TO MAKE BOTH THE SPRINGS IN EQUAL QUANTITY. THIS FEATURE IS ESPECIALLY FOR ROLLING SHUTTER SPRING INDUSTRY WHERE LEFT HAND AND RIGHT HAND SPRINGS ARE USED IN ALMOST EQUAL QUANTITY.

THIS MACHINE IS FOR FULLY AUTOMATIC PRODUCTION OF ROLLING SHUTTER SPRINGS. THE MACHINE IS SPECIALLY DESIGNED TO FULFILL THE REQUIREMENT OF ROLLING SHUTTER SPRING INDUSTRY. THE MACHINE IS CAPABLE TO MAKE ROLLING SHUTTER SPRINGS FROM 5MM TO 10 MM WIRE DIAMETER WITH LEFT HAND AND RIGHT HAND COILING SIMULTANEOUSLY TO MAKE BOTH THE SPRINGS IN EQUAL QUANTITY. THIS FEATURE IS ESPECIALLY FOR ROLLING SHUTTER SPRING INDUSTRY WHERE LEFT HAND AND RIGHT HAND SPRINGS ARE USED IN ALMOST EQUAL QUANTITY.

A CNC MACHINE FOR PRODUCTION OF DIFFERENT TYPES OF WIRE BENDS. ANY 2D WIRE BENDS AT VARIOUS ANGLES AND RADIUS CAN BE ACHIEVED. A SIMPLE PROGRAMMING LANGUAGE OF CNC CONTROLLER ENABLES EASY PROGRAMMING OF THE PART WITH CONVENTIONAL G AND M CODES. A DESKTOP SOFTWARE PROVIDED WITH THE MACHINE IS CAPABLE TO CONVERT DRAWING TO MACHINE LANGUAGE. FEEDING AND BENDING ARE CNC AXIS AND WIRE CUTTING IS ACCOMPLISHED WITH A HYDRAULIC CUTTER. PNEUMATIC PRESSURE OVER FEED ROLLS ASSURE UNIFORM PRESSURE. A WIDE BASE PLATFORM GIVES SUPPORT TO LARGER BENDING PARTS.