Richards Chemicals & Electricals Pvt. Ltd. Worli, Mumbai, Maharashtra

Forming fabrics, wet press felt, dryer felts and dryer screens are clogged by fine deposits & foreign materials. Such deposits result to poor drainage system, loss of production, enhanced cost of energy and leading to inferior quality of produce. Numerous problems are noticeable specific to poor sheet quality, crushing, increase in sheet breaks, higher steam consumption, wear & tear of machine fabrics. FABCLEAN, a recommended product is developed to dispense these intricate problems. It generates efficient fabric cleaning system for paper machine clothing such as wire, press felt, dryer felts and dryer screens. Properties pH - 6.5 ± 1.5 Ionic Nature - Non-Ionic Appearance - Emulsion Sp. Gravity - 1.05 ± 0.05 Stability - Good Application : "CON-TROL" Fabclean, a product formulation of dispersants, surfactants and emulsifiers, recommended for use and application in the removal and cleaning of dirt, chocked & clogged material without any adverse effect on the quality of fabric. Use and application of product is prescribed after diluting in 1:20 ratio. Before use, allow the machine to run at a low speed. While in the crawling motion, the solution is spread over the surface of the fabric all through the deckle, preferably with shower. On motion, the fabric should be properly soaked with solution for 20/25 minutes. After proper soaking of fabric is processed by applying the use of high pressure shower, rinse it thoroughly with water. Whenever online cleaning is undertaken the dilution ratio prescribed is 1:10 before use of high pressure showers and other felt conditioning vacuum boxes. Shelf Life The product is assured for a long standing life preferably to be stored in the covered, dry area to be kept at distance from heat. Exposure to the direct sunlight should be avoided. Values Offered Efficient cleaning system of Paper Machine Fabric  Improves upon : Machine efficiency Quality of end product Fabrics' shelf life Reduction of Steam consumption Power consumption Note : R&D mandates to improve the product for which any changes are at our discretion without prior intimation.

This is an effective chemical for removal of hot melt and wax from waste paper pulp. the product is to be added in refining chest prior to refining and consumption will be in the range of 500 to 1000 gram per ton of pulp. we assure minimum reduction of 60 to 70% of hot melt and wax from the pup.

We are offering it is a polymer and is to be added in wet end or on size press. most suitable for writing, printing and news print. it also improves drainage on the machine and helps in improvement in fpr

Effective de-inking chemical for flotation type de-inking system. it is to be added in hydro pulper @ 2.00 kg per ton of waste paper. chemical work at neutral to alkaline ph range.

The product is a partial fortified rosin in solid form. it is available in packing of 25 kgs hdpe woven sacks. consumption of this chemical for internal size will be 35 to 40% of the solid rosin. it is be melted with steam and caustic is to be added in the product to convert in rosin size. most suitable for any kind of paper sizing in acidic ph range.

We are offering product is a cationic polymer and improves ply bond and stiffness of duplex board. the product is to be added @ 2.0 kg per ton of pulp in wet end. besides this it also improves drainage on the machine.

A unique product with a blend of Epichlorohydrin based polymers. it is usual for any Paper & Board industry, to undergo recurring and chronic problems of Fluff/Lint in Paper . Such problems of fluff/lint are overcome by the use and application of the product "CON-TROL"© 1810.The product is useful for application in bringing about uniformity of results. The addition of this chemical reduces/eliminates fluff/lint in paper Properties pH - 5.0 ± 1.0 Ionic Nature - Cationic Color - Transparent Liquid Solubility - Water Soluble Solids - 10.5 ± 1.0% Shelf Life - 6 months Application :"CON-TROL"© 1810 ,is to be added @ 0.10 to 0.25 (1.0 to 2.5 Kgs) per ton of pulp, A recommended product for use and application for normal papermaking conditions. As prescribed, the consumption of 0.2 to 0.3% of the resin provides sufficient improvement in the fluff removal in the paper machine process irrespective of any prevailing state of locations and conditions. The product can be used directly in the mixing chest. It can also be injected with dosing pump before the head box/pressure screen etc. Shelf Life The product is assured for a long standing life preferably for storage in the covered area to be kept at distance from heat. Exposure to the direct sunlight has to be avoided. Values Offered Reduces Fluff/Lint problem in Paper Improves upon : Printability of Paper & Board IGT and wax pick values Marginal improvement in first pass retention Increases efficiency of machine productivity Increases the bonding between fibers Note : R&D mandates to improve the product for which any changes are at our discretion without prior intimation.

Color : TRANSPARENT TO PALE YELLOW

Type : POLYMER

Is a cationic dry strength resin. it is be added in mixingmachine chest @ 3.0 to 5.0 kgs per ton of pulp. it improves strength properties of kraft paper including bursting strength of kraft paper. this product can also be used in size press operations along with starch.

Environmental protection confers use of waste paper for manufacturing of various quality of papers. “CON-TROL” 9099 most sought after product by paper manufacturers, effectively disperses ink from the raw material. This de-inking chemical is useful for process under alkaline & neutral pulping conditions. The formulation of the product loosens the ink particle bonded to the paper surface. It thereby help in disintegration of ink mass. Product is most suitable for wash type of de-inking process.Properties pH - 1 to 2 Ionic Nature - Cationic Appearance - Emulsion Color - Creamish Sp. Gravity - 1.05 ± 0.05 Applications Use and application of “CON-TROL” 9099 is recommended at 0.2% to 0.5% based on the quality of waste paper and the process adopted by individual mill. The product is added directly in pulper along with other chemicals. Optimum results are obtained at a Temperature of 50 to 60o C with retention time of 1 to 2 hours. Shelf-LifeThe product is assured for a long standing life preferably to be stored in the covered, dry area, kept at distance from heat. Exposure to the direct sunlight should be avoided.Values Offered Reduction in consumption of : Caustic Soda Silicate Surfactants Efficiency for better Ink removal Effective on heavily Printed Paper Access to low cost raw material - Coated & Light printed paper Note : Use of Dispersant, Alum and Kerosene may affect efficiency of products. R&D mandates to improve the product for which any changes are at our discretion without prior intimation.

Color : creamish

"CON-TROL"© 1512 improves various strength properties and printability of craft paper & board. The Product gets absorbed into the fibers because of its cationic charge. Elevated temperature makes the inter-fiber bonding less susceptible to hydrolysis. It also ensures retention of fillers and color pigments at any pH range leading to better opacity. It also improves retention of synthetic sizing agents based on alkyldiketone. Properties pH - 2.4-3.2 Ionicity - Cationic Appearance - Yellowish liquid Density - 1.03-1.05 g/cm3 Viscosity - 20-50 mPa.s Solids - 10% ±1% Shelf Life - 6 months Application : CON-TROL 1512© can be added directly in the mixing chest @ 2 TO 5 KG per ton of pulp. For best results we recommend that the chemical should be injected with metering pump by diluting in the ratio of 1:5 just prior to the head box of the paper machine (stock pump, selectifier). Dilution ensures good distribution in the stock and thus maximizes performance. When it is used only for retention an addition rate of 0.1-0.3% at the head box is recommended. Shelf Life : The product is assured for a life of 6 months preferably for storage in the covered area to be kept at distance from heat. Exposure to the direct sunlight should be avoided. Values Offered Increases retention of fillers and color pigments Improvement in : Opacity Dry strength properties of papers & board printability of Paper & Board Improvement in first pass retention Note : R&D mandates to improve the product for which any changes are at our discretion without prior intimation.

In Rainy & Winter seasons , it is usual for any Paper & Board industry, to undergo chronic problems of dimensional stability. Paper as such considered to be hydrophobic in nature tends to gain atmospheric moisture during such climatic seasons. Such climatic problems are overcome by the use and application of the product "CON-TROL" 2424 'A', The formulation dispenses these occurring problems mainly in rainy and winter season. Under seasonal variation and change of geographical locations, the product is useful in bringing about uniformity and consistency of dimensional stability, add stiffness and plywood. This product is useful in the retention of the various types of dimensional stability of Paper & Board; gets absorbed in the fiber. A unique product with a blend of polyamide amine and poly amine based polymers. Properties pH - 3.0 to 4.0 Ionic Nature - Cationic Color - Yellowish Liquid. Solubility - Water Soluble Solids - 9.0 ± 1.0% Shelf Life - 6 months Application Of Product : "CON-TROL" 2424 'A' , a recommended product for use and application under all form of processes for normal papermaking conditions. As prescribed, the consumption of 0.2 to 0.3% of the resin provides sufficient improvement in bursting and tensile strengths including other dimensional stability of paper & board. The product can be used and applied freely and directly in the mixing chest. Besides this, other process applied can be injected with dosing pump before the head box/pressure screen etc. Use of the excessive consumption of this chemical ensures the properties of wet strength of Paper & Board. Shelf Life : The product is assured for a life of 6 months preferably for storage in the covered area to be kept at distance from heat. Exposure to the direct sunlight should be avoided. Values Offered Maintains high dimensional stability of Paper & Board Marginal increase in various types of dry strength properties of Paper & Board Improves upon : Printability of Paper & Board Stiffness of Board and rattle of Paper IGT and wax pick values In papermaking process dimensional stability and other strength properties are obtained without any curing / aging required Marginal improvement in first pass retention Increases efficiency of machine productivity Eliminates Fluff problem in machine Increases the natural hydrogen bonding between fibers Note : R&D mandates to improve the product for which any changes are at our discretion without prior intimation.

A unique product with a blend of Epichlorohydrin and poly amine based polymers. It is usual for any Paper & Board industry, to undergo recurring and chronic problems of Fluff/Lint in Paper and also they seek of improved wet strength properties of paper for better printability. Such problems of fluff/lint and wet strength can overcome by the use and application of the product "CON-TROL" 1909. The product is useful for application in bringing about uniformity of results. The addition of this chemical reduces/eliminates fluff/lint in paper & also improves the wet strength properties of paper for better printability. Properties pH - 5.0 ± 1.0 Ionic Nature - Cationic Color - Transparent Liquid Solubility - Water Soluble Solids - 11.5 ± 1.0% Shelf Life - 6 months Application Of Product"CON-TROL" 1909 ,is to be added @ 0.20 to 0.30% (2.00 to 3.00 Kg) per ton of pulp. A recommended product for use and application for normal papermaking conditions. As prescribed, the consumption of 0.20 to 0.30% of the resin provides sufficient improvement in the fluff removal in the paper machine process & also offers improvement in the wet strength properties of the paper;( irrespective of any prevailing state of locations and conditions). The product can be used directly in the mixing chest. It can also be injected with dosing pump before the head box/pressure screen etc. The curing time is of 12-25 hours. Shelf LifeThe product is assured for a long standing life preferably for storage in the covered area to be kept at distance from heat. Exposure to the direct sunlight has to be avoided. Values Offered Reduces Fluff/Lint problem in Paper Improvement in wet strength properties of the paper Improves printability of Paper & Board Marginal improvement in first pass retention Increases efficiency of machine productivity Increases the bonding between fibers Note : R&D mandates to improve the product for which any changes are at our discretion without prior intimation.

PH : 4.0 to 5.0

Color : Colorless to Transparent Yellow

Stickies result to loss of productivity, machine down time and immobilization of paper mill. Every papermaker intends to dispense elements of stickies in the process of manufacturing. Such deposits are generated by way of Re-pulping, Deinking of Waste Paper, Broke, Pitch formation in Pulping and changes in Climatic conditions. The product, "CON-TROL" © SC-2001 has been developed to do away and cleanse the sticky material during processing. The product is blended formulation of reentrant, dispersant, solvent and quaternary ammonium compound. It is recommended for use and application in Pulp and Paper Mills. It helps in the cleansing of the machine Wet Felts and flexible to neutral, acidic and alkaline systems. Properties pH - 3.6 ± 0.5 Ionic Nature - Cationic Appearance - Emulsion Sp. Gravity - 1.00 ± 0.10 Emulsion Stability -Very Good Before Use Shake & Mix the Product Application : "CON-TROL" © SC-2001 a recommended product, ensuring operating efficiency and raising productivity of the paper machine. It upkeeps and cleans Press Felts, Dryers Screens/felts and Dryers cleaner resulting to improvement in the performance of the paper machine. The product makes easier and faster repulping process ensuring uniformity in the dispersion of hot melt and other synthetic adhesives, quicker removal of extraneous materials on deckers and screens. Dosage prescribed for use between 500-600 Gms per Ton of paper subject to furnish and water quality. Optimum results desired the dilution to be in the ratio of 1:2. Additional dosages in Hydro Pulper is recommended to prevent Stickies/ Pitch formation avoiding SLIME growth in the system. Shelf Life : The product is assured for a long standing life preferably to be stored in the covered, dry area, kept at distance from heat. Exposure to the direct sunlight should be avoided. Values Offered Reduction of Paper breaks to least minimum Improvement of paper release at paper web Minimizing of accumulation of contaminated elements on the doctor blade Dispersion of stickies/pitch into finer particles easily drained from Washing system and paper machine Minimization of stickies' elements. Improving drainage system and dryer performance Enhances productivity of the machine and efficient performance of Paper Machine Note: The product stands ineffective in prevention of stickies generated due to presence of Plastic, Rubber, and Thermocole material. R&D mandates to improve the product for which any changes are at our discretion without prior intimation.

Sheet breaks occur mainly for sticky elements clogging to press felts, dryer screen and forming fabrics. It results to loss of production. "CON-TROL" SG-2501 is developed to ensure as a release aid when applied on the surface of the rolls. This disperser products keeps away dirt sticking on the surface of Press rolls and Calendar roll. It also acts as a releasing agent in M.G. poster, soft and hard tissue paper manufacturing. Properties pH - 5.4 ± 0.2 Ionic Nature - Cationic Appearance - White Emulsion Sp. Gravity - 1.0 ± 0.1 Shelf Life - 6 Months Application :Product "CON-TROL" SG-2501, its use and application is recommended on the surface of the rolls or on Dryers @ 70 Gms per Mtr2, in dilution, in ratio of 1:1, prior to process. When the chemical is applied on the surface, a thin film is formed which remains effective for at least 24 hours. Shelf Life The product is assured for a life of 6 months preferably to be stored in the covered, dry area, kept at distance from heat. Exposure to the direct sunlight should be avoided. Values Offered Dispersion product removing sticky elements Releasing agent to keep away stickies in the system Usable in poster and tissue paper manufacturing Acts as a release aid on application Note : R&D mandates to improve the product for which any changes are at our discretion without prior intimation.

"CON-TROL" Bleach 1011 is an reductive bleaching chemical. It is a powered stable compound, which dissolves in water and decomposes gradually to produce sulfoxylic acid to exhibit a reducing action. The reaction is promoted by the application of heat or in the presence of alkali, an a strong reducing action is thereby exhibit. Properties Thiourea% Max 0.1 Moisture % Max 0.05 Iron (Fe) ppm Max 10.00 Sulphate% Max 0.17 Appearance White Crystalline Powder Application :"CON-TROL" Bleach 1011 is a substitute for NaC1O bleaching in bleaching of waste wood-free or mechanical paper and as substitute for Sodium Hydrosulfite bleaching in post bleaching (after hydrogen peroxide de-inking/bleaching) It has a property of reacting with oxygen in the air slowly as compared with Sodium Hydrosulfite. Even when a presently used NaC1O bleaching equipment is diverted as it is. Loss due to oxidative decomposition is relatively small and a bleach brightness equal to that attained by NaC1O bleaching can be attained by choosing a suitable using amount of this chemical. Shelf Life  The product is assured for a long standing life preferably to be stored in the covered, dry area, kept at distance from heat. Exposure to the direct sunlight should be avoided. Values Offered Considerable discoloring effect on dye type coloring materials Effective on a wide variety of pulp sources as reductive bleaching aid Achieves optimal brightness gain in the de-inking process Note : R&D mandates to improve the product for which any changes are at our discretion without prior intimation.

This is an effective chemical for removal of hot melt and wax from waste paper pulp. the product is to be added in refining chest prior to refining and consumption will be in the range of 500 to 1000 gram per ton of pulp. we assure minimum reduction of 60 to 70% of hot melt and wax from the pup.

This is an effective chemical for removal of hot melt and wax from waste paper pulp. the product is to be added in refining chest prior to refining and consumption will be in the range of 500 to 1000 gram per ton of pulp. we assure minimum reduction of 60 to 70% of hot melt and wax from the pup.