Scientific Devices (Bombay) Pvt. Ltd. Mumbra, Thane, Maharashtra

Ultrasonic level meter is manufactured by Scientific Devices, absorbed many kinds of level meter advantage, achieve full digital, humanized design concept, now become our last update and high end products, use cast aluminium and waterproof housing, use international common appliance connector, with standard wire connector, easy to install and with waterproof sealing cover, has perfect liquid level monitoring measuring, data transfer and human-machine communication features, use big display for the operation manu, can recode ten interrerence echo point, use import industrial class single chip, digital temperature compensation and use about ten relatived specific IC ship with wide input voltage. With a strong anti-interference, can be set for the upper and lower liquid level limitation and output adjust, also with on site display, selectable analog, switch and RS485 output, at the same time support RS485 (Modbus) serial mode debug menu, to make up for the lack of display function, convenient interface and related facilities, also intelligent software design, for make up to no display, also can use external adjustment resistor to set internal parameters. Easy to connect with the relative facility, no need to connect with industrial media to meet most of the level measurement requirements,accordingly , it can completely solve the blockage, leakage, corrosion, maintenance inconvenience shortcomings from the traditional measurement of pressure, capacitive, float type winding. Applications Water and water meter treatment Pumping stations, collection wells, biochemical reactions pool, settling ponds Electricity, mining Mortar Pool, coal slurry pond, water treatment.

Scientific Devices Turbine Flow Meters are useful for liquids & gases in general industrial application. They provide excellent performance with quality & reliability. Suitable for as hygienic application. The flowing media engages a vaned rotor causing it to rotate at an angular velocity proportional to flow rate. The pick -of coil senses the spinning motion of the rotor inside the pipe & converts it into a pulsating electrical signal. Summation of the pulsating electrical signal is directly related to the total flow. The frequency is linearly proportional to flow rate which is converted to mA signal by electronic circuitry. Flow rate Indicator / Totalizer / Transmitter and Controllers are available in Local/Remote and Panel Mounted Options.  

We offer tee type strainer.

We offer suction strainer.

The strainer is a filtering element incorporated in the pipe line. It is called a ‘Y’ Type, ‘Basket’ Type or ‘T’ Type strainer because of its shape. Inside the strainer is a mesh, which blocks any suspended impurities that the fluid has and is collected in the mesh. During maintenance the mesh can be removed and cleaned of the impurities.  

Scientific Devices offers a complete range of Orifice plates for a variety of flow conditions for mounting between flanges for Carrier Rings and with RJ Plate Holders for mounting between RJ Flanges.  Scientific Devices Orifice Flange Assemblies are made to AGA/ASME recommendations and are reliable means to flow measurement. Assemblies to other international Standards viz. ISO, BS, DIN etc. are also available. Scientific Devices Orifice flanges cover complete range of sizes pressure rating upto ASA 2500 of ANSI B16.36 as standard and dimensions as per other major international standard viz. – APL, MSS, BS and DIN etc. are also available on request. These flanges are available in various types such as Weld neck, Slip on, Screwed with facing FF, RJ, TG etc various types of tapping available are viz. Flange, Corner and D-D/2. Orifice Bore calculation can be carried out as per ASME MFC-3M, ASME 19.5 ISO 5167/BS1042, R.W. MILLER and L.K. Spink etc. Scientific Devices Orifice Flange Assemblies are supplied ready to install in pipelines complete with Studs, Nuts, Jack Bolts, Gaskets and Drain Plugs. Scientific Devices Orifice Flanges are manufactured in broad variety of materials to ASTM Standards viz.

Ideal for installation in pipe lines for continuous measurement of density of liquids. Available in different materials of construction and in screwed or flanged type connection. Measuring Range : a) 0-1 gcm3 b) 0-2 gcm3 c) 0-3 gcm3

It is an instrument used to measure instant flow rate of Liquids and Gases. Can be used for metering of translucent/opaque fluids under high operating pressure and temperature.  

SDSPLT static pressure level indicator transmitter assembled with advanced pressure sensor and double layers cable which are our original creation with wear resistant and water proof featutes can meet the demands of various extreme service conditions. Full welding stainless steel armored tube structure ensures the measurement in the corrosive liquids.The measured medium can be water, oil, acid, alkali or viscous liquid. Advanced in technology, precise in measure, reliable in quality, easy in installation, SDSPLT transmitter is an ideal and economical level instrument for process measure and control system.SDSPLT level indicator transmitter is tailored for liquid sulfur and high temperature naphthol and combined with previous international application experiences. This product with stainless steel armored welding cable and adopted with special high temperature large diaphragm sensor can be used to measure high temperature nd strong viscosity medium and can solve other measuring difficulties process industry.

The Scientific Hydrostatic Level Indicator is a robust diaphragm type gauge with a dial read out. It is designed for easy on site adjustment to take account of varying liquid density. This gauge requires no power source and is suitable for fitting to tanks, which may be used for different liquids where the specific gravity may change. These externally mounted version is suitable for general application, though it is particularly suitable for marine applications.

It is an instrument used to measure instant flow rate of Liquids and Gases. It is installed in the pipe line vertically upward with flanged or screwed connection.   

We offer full view glass with tri-clover connection.

A Flow switch is normally a simple device that monitors flow and sends a trip signal to another device such as a Pump to protect it. Flow switches are used for Pump protection, Cooling Circuit protection, high & low flow rate alarm and general flow monitoring. 32

We offer electromagnetic flowmeter (smag-300 series). The electromagnetic flow meter accurately measures the flow rate of any conducting liquid or slurry that is flowing in closed pipes. It is obstruction less and hence offers no pressure drop in the process. Absence of moving parts ensures that there is no need for maintenance. The performance of the instrument is not affected by the properties of the material such as corrosiveness, viscosity, density, acidity and alkalinity. It can measure the flow of liquids, pastes and slurries in water, wastewater. Suitable for chemical, fertilizer, paper, dairy, sugar, food and beverage industries.

The electromagnetic flow meter accurately measures the flow rate of any conducting liquid or slurry that is flowing in closed pipes. It is obstruction less and hence offers no pressure drop in the process. Absence of moving parts ensures that there is no need for maintenance. The performance of the instrument is not affected by the properties of the material such as corrosiveness, viscosity, density, acidity and alkalinity. It can measure the flow of liquids, pastes and slurries in water, wastewater. Suitable for chemical, fertilizer, paper, dairy, sugar, food and beverage industries.  

We offer duplex filterstrainer.

We offer double window sight glass with rotory wheel.

We offer double window sight glass with flapper,.

  A sight Flow Indicator is a device which is inserted in a run of pipe to observe the flow of fluid in the pipe. To enhance the visibility of the flow, spinner is often incorporated in the flow stream so that fluid impinging on the spinner vanes cause it to turn.

We offer conical strainer.

This complete assembly comprises a D.P. Transmitter for 4-20mA analog output & an averaging pitot tube assembly as a primary flow sensing elements.  A most reliable & economical instrument for low measurement of Gas, Liquid & Steam application: Specification * Choice of linear or square root output. * A/D or D/A converter not required as the electronic unit can be directly hooked up with the control system. * Piezo resistive sensor for temperature & pressure compensation. * Programmable engineering units for display

Scientific Devices Averaging Pitot Tube is a primary flow measuring element based on the principal of measurement of differential pressure across the high & low pressure port. The differential pressure created due to the obstruction of Pitot Tube inserted from the top in the main stream of the fluid flow through the pipe line. Specification * Multiport averaging for light rate of accuracy. * Repeatibility of reading upto 0.1% + * High flow rate turndown ration * Low permanent pressure loss. * Suitable for liquid, Gas & Steam flow application. * Available in various material like SS316,SS316/SS304,SS304L etc. * Compatible for a wide range of fluid. * For large pipeline economical as compare to other type of differential pressure measurement flow meter.