Thermosetting Road Marking Materials
Thermosetting road marking materials include Shivapol 1101 and Shivapol 1102. While Shivapol 1101 is meant as a retroreflective marking, Shivapol 1102 is non-reflective in nature. They are available in colors of white and yellow. Both the above-mentioned road marking materials give best results when applied on a primed surface. It is for this reason that SAP manufactures Shivaprime, a road marking clear primer. It provides better adhesion between the road marking material and road surface. Properties Shivapol 1101, 1102 and Shivaprime exhibit the following properties: • Air drying, which is a very fast process • Excellent adhesion and bonding properties • Easy application • Economical to use Applications Shivapol 1101 and 1102can be used on a variety of surfaces such as bitumen, reinforced concrete and cement. They find application as traffic paints and are used for marking traffic lanes, parking areas etc. Shivaprime is used as the primer before applying either Shivapol 1101 or 1102. *A thermosetting resin, also known as a thermoset is a material that irreversibly cures. The cure is induced through heat application at temperatures of above 200°C. The material is usually molded into its final form before being cured.
...moreThermoplastic Road Marking Paint
Thermoplastic road marking paint are extensively used as traffic paints and are used for marking traffic lanes, parking areas etc.
...morethermoplastic road marking materials
Crystalex is a specifically formulated high quality reflective thermoplastic* road marking material. Specifications- BS: 3262 and MORTH: 803.4 Colors- White Reflective and Yellow Reflective Properties • Fast drying • Imparts a glossy finish to the applied surface • Imparts skid resistance properties to the applied surface • Has thickness control and a longer life than conventional road marking materials such as liquid paint • Delivers high performance and is cost-effective Applications Crystalex is used as a hot melt resin for marking of roads. It is applied on the road surfaces with the help of thermoplastic screed application prams, motorized marking machines etc. It is ideal for cemented or reinforced concrete roads (e.g. highways), bituminous surfaces etc. *A thermoplastic or thermosoftening plastic is a polymer, which becomes pliable or moldable above a specific temperature and then returns to its solid state upon cooling, which in most cases meansa return to the ambient temperature.
...moreSynthetic Floorings
Shivabond 505 is a specifically formulated two component thermosetting resin. It is used as a polymerized floor-topping compound so as to provide a dense, abrasion resistant surface to the floor as well as to increase its structural strength and depth. Properties • Room temperature curing • Inherent resiliency • Good Flow ability • No shrinkage • Low exothermic temperature • Post curing minimized • Excellent mechanical properties • Excellent electrical properties • Low coefficient of expansion • Excellent bonding Applications Shivabond 505 is used in: • Flooring of electrical substations • Industrial flooring • Flooring of railway compartments
...moreShrink Films
170 - 180 Per Kilogram
500 Kilogram (MOQ)
SAP manufactures LDPE shrink wrap film used for packing a variety of consumer and industrial products. The process involves wrapping the shrink film around the desired product and then applying heat, which causes the film to shrink tightly over the product. Standards: BIS 2508:1984 Thickness: 30 to 150 microns Advantages • Saves additional storage • Protects from humidity, dust and dirt • Perfect for multi-packs, which offers value & cost savings to both the packagers and consumers • Allows for storage in the refrigerator • Products packaged in shrink film are tamper proof Applications • Cosmetics & Pharmaceuticals. • Paper Products & Stationery Items. • Soaps and Detergents. • Food Products. • Engineering Goods. • Household Disinfectants
Type : Shrink Films
Material : LDPE
Thickness : 50mm above
Length : customize
Application : Packaging
Color : Transparent
Feature : Transparent
Pattern : Plain
Width : 75-100cm
Hardness : Soft
Transparency : Transparent
Country of Origin : India
...morePU adhesive
650 - 900 Per Litre
Polyurethane based adhesives are used for bonding different materials and as such are used in the production of oil filters, air filters etc. We manufacture 4 types of polyurethane adhesives, namely: Shivapol 214 is a PU based filled adhesive used for producing oil and air filters that find extensive use in the automotive industries. It has excellent bonding properties. Due to the fact that it cures at room temperature, it is quite easy to use. In addition to the oil and air filters used in automobiles, Shivapol 214 is also used to produce other types of industrial filters.
Type : Polyurethane Adhesives
Material : PU
Color : black
Adhesive : PU
Adhesive Side : Double Sided
Design Printing : Plain
Country of Origin : India
Brand Name : SHIVABOND 615
...morePaints and Coatings
Polyurethane (PU) coatings/paints are widely known for their inherent toughness and flexibility. A variety of these paints, coatings and primers are manufactured by us and are used for waterproofing, sound insulation, anti-corrosion as well as for imparting chemical resistance properties. Different grades of the chemicals can be produced as per the requirements of the customer. We are supplying these paints/coatings to organisations like Rail Coach Factory, Kapurthala. We have recently developed a new grade of high performance 'anti-rust' paint that prevents rust formation on metal surfaces and its effects last for more than 10 years, as estimated by independent lab tests. Waterproofing and Anti-Corrosion Paints/Coatings Water resistance, anti-corrosiveness and chemical resistance properties, all together, can be imparted to different surfaces by using the following paints/coatings: · Shivabond 309 is a specifically formulated two component air-drying PU primer. It is used as primer coating on mild steel, tin, drainage pipes, FRP Surfaces, R.C.C etc. · Shivabond 315 is a specifically formulated two component, air drying, natural colored clear lacquer used for coating a variety of surfaces. It is used for coating Thermocol surfaces, R.C.C, FRP, asbestos etc. · Shivabond 353 is a specifically formulated, two component air-drying polyurethane coating. It is hard and has water resistant properties which arises due to its ability to be absorbed by concrete and thereby forming an integral part of the surface. It is used over cement plaster, asbestos, wood FRP etc. · Shivabond 356 is a specifically formulated, two component air-drying Polyurethane coating. It is hard and has water resistant properties which arises due to its ability to be absorbed by concrete and thereby forming an integral part at the surface. It is recommended for all type of metallic and non-metallic surfaces. · Shivabond 360 is a specifically formulated aliphatic non-yellowing, two-component air-drying polyurethane coating. It is hard, tough and has water resistant properties, which arise due to its ability to be absorbed by concrete thereby forming an integral part of the surface. It is used over cement plaster, asbestos, wood FRP etc. · Shivabond 366 is a specifically formulated polyurea (a type of elastomer) coating produced by the reaction of an isocyanate component with an amine blend. It has unique physical properties and rapid cure characteristics. It is ideally suited for waterproofing due to its ability to bridge hairline cracks on concrete surfaces. · Shivabond 615 is a specifically formulated, single component PU elastomeric coating, which is used for water proofing on PU foam, RCC and other metallic & non-metallic surfaces. · Shivabond 903 is a specifically formulated, two component polyurethane system to be used for various applications. It is used in a variety of industries such as construction (building facades, floor slabs, glazed tiles, in flooring and lining of tanks etc.), transport (under deck coating in vehicles, flooring of railway coaches), water resource management (interior lining of canals) etc. Sound Insulation & Fireproofing paints/coatings Shivabond 603 is a specifically formulated two component polyurethane coating/paint. It is used for sound insulation purposes as well as to impart flame retardant properties to the material. We manufacture different grades with different curing times as per customer requirements.
...moreMultilayer Films
shivalik agro poly products ltd. (sap) manufactures high quality, co-extruded multilayer polyethylene films, under the brand name of 'shivathene'. Through the process of co-extrusion, a maximum of three layers can be made into a single film. the manufacturing process is based on up-to-date three extruder technology, which gives highly improved, amalgamated, plasticized and homogenous superior quality films. The process leads to excellent color dispersion in the final product. we manufacture three types of multilayer films- milk packaging film, shrink film and silage film.
...moreMilk Pouch Film
These films are available pigmented & un-pigmented as well as printed & unprinted. Each of the three layers can have different polymers added to it, in order to meet the individual requirements of the customer.
...moremilk packaging films
SAP manufactures co-extruded three layered LDPE films. These films find extensive use in the packaging industries and are used for packing dairy, sugar, processed foods, detergents, pharmaceuticals etc. These films are available pigmented & un-pigmented as well as printed & unprinted. Each of the three layers can have different polymers added to it, in order to meet the individual requirements of the customer. Standards: BIS 2508:1984 Thickness: 40 to 150 microns Width: Up to 2 meters Color: White/Natural/Colored Applications 1.Dairy: Liquid milk packaging 2.Sugar: Liner bags for packing sugar 3.Pharmaceuticals: Liners/bags/pouches for in-house use and packing of bulk drugs 4.Processed food: Liners/bags/pouches for packing of food products 5.Detergents: Pouches/bags for packing detergents
...moreMicrocellular Foams
We manufacture Shivapol 212 and Shivanate 002, the chemical setup required for the production of microcellular foam. Shivapol 212 is a formulated polyol premixed with blowing agent while Shivanate 002 serves as the hardener. Properties Microcellular Foam has the following properties: • Excellent physico-mechanical properties • Excellent elastomeric sealant properties • Easy and economical to use Applications Microcellular Foam produced by mixing Shivapol 212 and Shivanate 002 in the prescribed ratio, is used for manufacturing: • Air filters for automotive industries • Industrial air filters • Gaskets Different grades of Shivapol 212 and Shivanate 002 can be manufactured to meet individual customer requirements
...morelow density polyethylene film
180 Per Kilogram
9000 Kilogram (MOQ)
We manufactures wide width low-density polyethylene film (LDPE) under the brand name of 'Shivathene'. These LDPE films find extensive use in industries such as agriculture, water management, packaging, construction, defense etc.
Type : Low Density Polyethylene Film
Material : Polyethylene
Thickness : 100-1500 micron
Color : Black
Feature : Premium Quality
Pattern : Plain
Hardness : Soft
Country of Origin : India
...moreLiners & Geomembranes
Shivalik Agro Poly Products Ltd. (SAP) manufactures high quality black polyethylene Liners and Geomembranes*, under the brand name of 'Shivathene'. These sheets are manufactured from virgin heavy-duty LDPE, HDPE and LLDPE granules and find extensive use in a variety of applications such as agriculture, irrigation, fisheries, civil construction works etc. Standards: BIS 2508:1984 (LDPE); ASTMD (HDPE) Thickness: 250 to 2000 microns Properties • UV stabilized with high quality carbon black master batch • Excellent tensile and tear strength • Dimensionally stable • Tolerant to temperatures ranging from – 500C to 730C • Non-toxic and inert • Easy to handle & transport • Resistant to moisture & liquids • Does not become brittle with age • Weather resistant • Does not degrade Applications • Lining water reservoirs and tanks • Landfill lining and capping • Lining irrigation canals, distributaries and channels • Mining • Highways, dams & lake banks • Aquaculture • Ash dyke • Salt Pans
...moreLDPE Tarpaulins
sap manufactures black ldpe (low density polyethylene) tarpaulins meant for multi-utility storage. These tarpaulins are used for covering various types of materials in both indoor and outdoor settings. They are used for covering materials where the constructed storage capacity is inadequate or is unavailable. black ldpe tarpaulins are normally used for covering agricultural produce, industrial products and are also used in transportation. thickness: 250 to 400 microns standards: bis 2508:1984 size: 40'x30' properties • totally waterproof • light weight & easy to handle • wide width with minimum no of joints • triple heat sealed for strength • tear resistant • puncture resistant • uv resistant • low permeability • easy to repair • inert & non-toxic applications • storage of kharif crops such as maize, paddy, cotton, soyabean, cotton etc. • making temporary relief shelters • covering of machines & materials • packaging of machines and material
...moreLDPE Tarpaulin
(Low Density Polyethylene) tarpaulins meant for multi-utility storage. These tarpaulins are used for covering various types of materials in both indoor and outdoor settings. They are used for covering materials where the constructed storage capacity is inadequate or is unavailable. Black LDPE Tarpaulins are normally used for covering agricultural produce, industrial products and are also used in transportation.
...moreLdpe Films
180 - 200 Per Kilogram
shivalik agro poly products ltd. (sap) manufactures wide width low-density polyethylene film (ldpe) under the brand name of 'shivathene'. these ldpe films find extensive use in industries such as agriculture, water management, packaging, construction, defense etc. range: 100 microns (400 gauge/0.1 mm) to 2000 microns (8000 gauge/2.0 mm) standards: bis 2508:1984 colors: available in black and natural colors properties • lightweight and flexible • excellent tensile and tear strength • puncture resistant • dimensionally stable • non-toxic and inert • highly tolerant to various weather conditions • extremely tough • excellent weldability and seamability • does not become brittle with age and use applications • agricultural purposes- food grain covers, tarpaulins, silos; fumigation covers etc. • lining of canals, distributaries, ponds & reservoirs • waterproofing roofs, basements, flooring & underground structures • packaging • covering of food grains, fertilizers, cotton, chemicals cement etc. • covers for sports stadiums, grounds & swimming pools • emergency shelter houses during natural disasters • lining of industrial effluent tanks & salt pans • underlay for concrete roads, bridges & runways
Material : Plastic
Color : White, black
Transparency : Transparent, black
Country of Origin : India
...moreldpe cap covers
sap manufactures black ldpe cap (cover & plinth) covers meant for fumigation and storage of food grains. They are normally used where constructed storage capacity is absent or is inadequate. the procedure involves the food grain bags being stacked on plinths and being covered with our ldpe cap covers. The side seams of the covers are then heat sealed for strength. Funnels are provided as air vents. The bottom ends are then hemmed and are provided with eyelets for anchoring. The gaseous pesticides or fumigants are later added through the funnels. thickness: 250 & 300 microns size: 32’x21’x17’ standards: bis 2508:1984 properties • high degree of retention of fumigants • uv stabilized which increases shelf life • temperature resistant: easily withstand temperatures ranging from -2°c to + 50°c • having single seam at the side and this seam is thermally welded to provide added strength • excellent chemical resistance properties against most acids and alkalies • dimensionally stable under various climatic conditions • excellent barrier characteristics that provides total protection against rain, dust, dew and storms • excellent durability due to strong welding work • can be put up at any place closer to the distribution or transportation points applications • storage of food grains • fumigation • covering of materials • temporary relief shelter • drying of agricultural products
...moreIntegral Skin Foams
We manufacture Shivapol 211 and Shivanate 003, the chemical setup required for the production of integral skin foam. Shivapol 211 is a formulated polyol premixed with blowing agent (can also be provided without blowing agent), while Shivanate 003 serves as the hardener. Integral skin foam is produced by the in situ reaction of Shivapol 211 with Shivanate 003 inside the mould. A 2-3 mm thick integral skin gets developed on the foam. Properties: Integral Skin Foamhas the following properties: • Fine cell foam structure • No migration • No plasticizing effects • Low smoke gas corrosivity in the case of fire • No influence on mechanical properties Applications: Integral skin foam is used in: • Automotive industries for manufacturing steering wheels, gear knobs, bicycle saddles, arm rests, baby seats etc. • Furniture industry for making arm rests, seats etc. We can manufacture different grades of Shivapol 211 and Shivanate 003 to meet individual customer requirements
...moreGeomembranes
180 - 200 Per Kilogram
1000 Kilogram (MOQ)
and thickness ranging from 0.50 mm - 1.0 mm are manufactured at sapl; these sheets are normally available in accordion fold/rolls of length 30 meters or as per individual customer requirement. the prime application for these geomembrane being in storage ponds, large reservoirs, effluent tanks, ponds, landfills and other heavy duty applications.
Color : Black
Thickness : 500-1000 Micron
...morehdpe liners
180 - 200 Per Kilogram
Shivalik Agro Poly Products Ltd. (SAP) manufactures high quality black polyethylene Liners and Geomembranes*, under the brand name of 'Shivathene'. These sheets are manufactured from virgin heavy-duty LDPE, HDPE and LLDPE granules and find extensive use in a variety of applications such as agriculture, irrigation, fisheries, civil construction works etc.
Type : Hdpe Pond Liner
Material : HDPE
Thickness : 500-1000 micron
Certification : ISI
Length : 0-100Mtr
Application : Pond Uses
Color : Black
Feature : Leak Proof, Waterproof
Pattern : Plain
Width : 4 Mtr-7Mtr
Country of Origin : India
Color : black
...moreHdpe Geomembrane Sheet
180 - 200 Per Kilogram
500 Kilogram (MOQ)
we manufactures high quality black polyethylene Liners and Geomembranes*, under the brand name of 'Shivathene'. These sheets are manufactured from virgin heavy-duty LDPE, HDPE and LLDPE granules and find extensive use in a variety of applications such as agriculture, irrigation, fisheries, civil construction works etc.
Size : Customised
Type : Hdpe Geomembrane Sheet
Material : HDPE
Shape : Rectengular, Square
Style : none
Thickness : 500-1000 micron
Certification : ISO Certified
Application : Garden, Roof, lining
Color : Black
Feature : Blackout, Eyelets, Recyclable, Shrink-Resistant, Waterproof
Technics : Non Woven
Pattern : Plain
Condition : New
Width : Customised, 4 Mtr-7Mtr
Country of Origin : India
...moreCold Cure Flexible Foams
We manufacture Shivapol 210 and Shivanate 002, the chemical setup required for the production of cold cure flexible foam. Shivapol 210 is a formulated polyol premixed with blowing agent while Shivanate 002 serves as the hardener. Shivapol 210 is also available without blowing agent. This grade is called Shivapol 210 WR. Applications Cold cure flexible foam produced by mixing Shivapol 210 and Shivanate 002 in the prescribed ratio, is used in: • Automotive industries for the production of seats, seat backs, headrests etc. • Furniture industry for making cushions and paddings Different grades of Shivapol 210 and Shivanate 002 can be made to suit individual customer requirements
...moreAdhesives
We manufacture three major types of adhesives, namely polyvinyl acetate (PVA) based adhesives, polyurethane (PU) based adhesives and synthetic resin based adhesives. These are used for bonding metallic surfaces, non-metallic surfaces and metallic with non-metallic surfaces. Our adhesives find widespread use in the production of automotive filters, industrial air filters, oil filters, furniture pieces etc. Different grades of these adhesives can be manufactured to meet individual customer requirements. PVA Based Adhesives Polyvinyl acetate based adhesives are milky white viscous adhesives and are ready to use. We manufacture 3 types of PVA adhesives- Shivacol 1001, Shivacol 1002, Shivacol 1003. Each of these can be thinned to required viscosity by adding clean water, although adding more than 2% water is not recommended. General Properties • Excellent bonding properties • Excellent physico - mechanical properties • Solvent free, hence no risk of fire hazards • Free from offensive smell • Shifting and alignment of surfaces is possible after bringing surfaces in contact (preferably within 5 - 7 Min.) • Best flow and spreadability, hence it can give higher coverage • Heat resistant in normal cases • Can be applied by brush, roller and spreader or by finger wherever required Applications • Shivacol 1001 in extensively used in furniture industries. It is used for bonding laminate ply wood, veneer, particle boards, block boards, rubber boards and woods such as shisham, silverwood etc. • Shivacol 1002 is widely used for manufacturing automotive filters. • Shivacol 1003 is used in shoe industries, for bonding shoe soles. PU Based Adhesives Polyurethane based adhesives are used for bonding different materials and as such are used in the production of oil filters, air filters etc. We manufacture 4 types of polyurethane adhesives, namely: Shivapol 214 is a PU based filled adhesive used for producing oil and air filters that find extensive use in the automotive industries. It has excellent bonding properties. Due to the fact that it cures at room temperature, it is quite easy to use. In addition to the oil and air filters used in automobiles, Shivapol 214 is also used to produce other types of industrial filters. Shivabond 509 is PU based filled adhesive used for the production of air filters that find extensive use in the automotive industries. Shivacol 1005 is specifically formulated, two component, polyurethane based adhesive used for shoe sole attachment purposes. It is used for bonding the leather or synthetic upper materials with the shoe soles, which might be of PVC, PUR, TPR, composite rubber or thermoplastic nature. The bonding is through heat activation. Shivabond 1122 is a single component PU based moisture cure adhesive. It is specifically formulated for bonding of metallic and wooden surfaces. It can be used for bonding of metallic panels with honeycomb paper; as an adhesive for windows, doors and wooden panels; as an adhesive for mineral wool, ceramic materials, concrete materials and foams. Synthetic Resin Based Adhesives We manufacture two types of synthetic resin based adhesives, namely Shivabond 1123 and Shivabond 1125. Shivabond 1123 Shivabond 1123 is a specifically formulated, single component synthetic rubber based adhesive. It is solvent based. It is normally used for bonding wood and PVC surfaces. Although, it can also be used for bonding metallic panels, PU foam sheets and materials like mineral wool, clothe, Rexene etc. Shivabond 1125 Shivabond 1125 is a specifically formulated, single component synthetic resin based adhesive used for bonding metal with paper and other substrates. It is normally used for manufacturing automotive filters, where it is used to form bond seals.
...morePolyols & Polyurethanes
Polyurethane Coating
Be first to Rate
Rate ThisOpening Hours